jiebolan P2-AIR P2 Air Bluetooth Headset User Manual

jiebolan P2-AIR P2 Air Bluetooth Headset

Product Information

Specifications:

• Compliance: Part 15 of FCC Rules
• RF Exposure: General RF exposure requirement met
• Usage: Portable exposure condition without restriction

Product Usage Instructions

1. FCC Compliance:
   This device complies with part 15 of the FCC Rules. It is designed to operate within the guidelines set by the FCC to prevent harmful interference.

2. RF Exposure Information:
   The device has been evaluated to meet general RF exposure requirements. It can be safely used in portable exposure conditions without any restrictions.

Frequently Asked Questions (FAQ):

• Q: Is this device safe to use in all environments?
  A: Yes, this device is safe to use in portable exposure conditions as it meets the required RF exposure standards.

• Q: Does this device comply with FCC regulations?
  A: Yes, this device complies with part 15 of the FCC Rules, ensuring it operates without causing harmful interference.

BLUETOOTH HEADSET USER MANUAL
Please read this guide carefully to ensure safe and satisfactory operation. Please keep this guide for future reference.

Bluetooth headset user manual

Know headphones

Come into use

On/off

1. Power on:
2. Automatic power on when the charging box is taken out.
3. Press and hold the headset multifunction key for about 5 seconds to turn it on, and the blue light will turn red first. Blinking blue, entering the waiting pairing mode.
4. Power off:
5. Put the earphone into the charging box and turn it off.
6. Press and hold the headset multifunction key for about 3 seconds, and the headset will turn off and the red light will flash for 5 times.

Note: Put the earphone into the charging box, close the box cover, and the earphone will enter the charging state. If The earphone can’t be charged, please check whether there is any stain when the earphone is charged and wipe it clean. Put it in the charging box again.

Connection and pairing Pairing mode

• First quick use:
  Press and hold the multi-function keys of two Bluetooth headsets for a long time, and the two headsets will flash (regardless of flashing What light Don’t search for Bluetooth) Wait 7-10 seconds, and one of them will alternate between red and blue flash. Only when the other blue light flashes slowly can the mobile phone turn on the Bluetooth function and search for Bluetooth devices. (as shown below), find the Bluetooth headset and then connect it. If there is something wrong with Bluetooth or it doesn’t work properly, always, please clear the Bluetooth list of your mobile phone. Follow the instructions again.

• Subsequent use:
  As long as two Bluetooth phones are turned on, the mobile phone can be automatically connected back.

Connect the mobile phone
The mobile phone can connect by searching for the Bluetooth name “P2-Air”, and the indicator light will go out after the connection is successful.

Note: The connected earphone will be automatically connected back to the device when it is taken out.

Functional operation

Headphone function key operation guide

• Volume reduction: three strikes left (L)
• Previous song: Double-click the left ear (L)
• Volume Plus: Three Strikes Right (R)+
• Next song: Double-click the right ear (R)
• Pause playback: Click the (L/R) key
• Answer the phone: Click the (L/R) key during the call
• End call: Click the (L/R) key during the call.
• Reject the call: Touch the (L/R) key for 3 seconds in incoming call model
• Wake up SIRI: press and hold the left and right ear (L/R) keys Game mode / music mode Four strikes (L/R) key to enter the game mode and music mode Switch between Chinese and English → Turn on the machine without connection → Touch it continuously for 3 times. Restore the factory settings-When the machine is turned on and disconnected → Touch it continuously for 6 times.

Other functions

The headset and the mobile phone are out of the connection range, and the headset enters the connected search device mode. If there is no equipment connection for more than 3 minutes, the headset will enter the pairing state. If there is no pairing for a long time, headphones will automatically turn off.

Operation mode (charging)

Headphone battery charge and charging

• Headphone power display
  The status bar of mobile phone can display the power information of earphone equipment Information (mobile phone version is required to support this function)

• Headphone charging state
  When the earphone is charging, the indicator light will be charged. hint. When it is full, the indicator light goes out.

• Headphone low battery reminder
  When the earphone is in a low battery state, the earphone will there is a voice prompt to indicate that the battery is low, please and Put the earphone in the charging box to charge.

• Charging bin power and charging
  Charging bin charging It is recommended to use the standard charger and the attached charger. The wire charges the charging bin.

• Charging bin low battery reminder
  When the charging bin is too low. Indicator light continues blinking, please charge the bin in time.

Indicator light status

• Boot: blue indicator is on
• Shutdown: the blue indicator lights up and goes out
• Pairing status: Red and blue indicator lights flash alternately
• Pairing succeeded: the indicator light went out
• Music status: indicator light goes out
• Call status: the indicator light goes out
• Game mode: the blue indicator shows breathing light effect
• Low battery: the blue indicator is flashing.
• voice prompt
  • Charging status: the blue indicator is always on
  • Charging complete: indicator light goes out

Bluetooth mode:

1. Charging: The green indicator flashes
2. Charging is complete: the green indicator light is always on
3. Low battery: the green indicator flashes until it goes out
4. Headphones are charging: the green indicator is always on
5. Headphones are fully charged: the indicator goes out

• Matters needing attention in charging Use a charger with DC output voltage of DC5V-1A, USB port of PC or Charger with USB port output (a charger certified by a regular manufacturer must be selected) Warm reminder: This product contains a built-in rechargeable lithium battery. Safety warning for battery use: It is forbidden to hit, squeeze or throw into the fire. If there is serious swelling, please continue to use it suddenly. Please place it suddenly. High temperature environment: Do not use the battery after immersion.
• Please try to remove the battery from the earphone suddenly to avoid damaging the earphone.
• Headphones will-automatically  power when put on hold: it is recommended to charge the headphones in 3-6 months.

Specification parameter

The above data comes from the laboratory, and the actual parameters will be different due to products or other factors.

Frequently asked questions

Tips

1. When connecting for the first time, please control the distance between the earphone and the mobile phone within 1 meter;
2. After the pairing is successful, when the subsequent mobile phone and this earphone are used, turn on the Bluetooth of the mobile phone. When the headset is turned on, it can be automatically connected with the mobile phone.
3. The specifications and external forms of this product will be different at any time due to improvement and strengthening;
4. The design and specifications are subject to change without prior notice;
5. Please use a dry cloth to clean the headphones frequently:

Matters need attention

• Do not use this product while driving or cycling.
• Do not use this product for a long time or at a high volume, so as not to damage your hearing.
• Please do not use this product in noisy environment (such as roads with dense motor vehicles) to avoid danger.
• This product is not equipped with any self-repairing parts, so please do not dismantle or modify it without authorization.
• Please do not place or use this product in high temperature or humid environment.
• Do not put this product into fire or water.
• Do not put heavy objects or exert pressure on the headphones, otherwise the headphones may be deformed during long-term storage.
• According to the advice of pediatric medical experts, it is not recommended to use earphone products for people under 9 years old.
• Magnetic fields may be harmful to people who wear pacemakers and defibrillators. Pacemakers and implants are recommended.patients with implantable defibrillators should keep a distance of at least 3cm between the earphone and the implantable device. this product contains a built-in rechargeable battery. Safety warning for battery use: Do not disassemble, impact, squeeze or throw into the fire; If there is serious swelling, do not continue to use it, do not place it in a high temperature environment, and the battery do not use it after

Bluetooth headset performance Barrier table

Guarantee card

Defects liability period The Bluetooth headset host is 12 months from the date of purchase, and the related accessories are 3 months from the date of purchase. During the warranty period of the product, all faults caused by the quality of the product itself should be guaranteed by the user. Contact the dealer for card repair and shopping voucher to enjoy free maintenance.

Free maintenance is not available in the following situations

1. Unauthorized maintenance, misuse, collision, negligence, abuse, liquid intake, accidents, Alter, improperly use accessories other than this product, or tear, alter labels, and prevent Pseudo marks etc.;
2. The validity period of three guarantees has expired;
3. Damage caused by force majeure, man-made damage, etc.
4. Failure to meet the performance failures listed in the Bluetooth Headset Performance Failure Table;
5. Due to human reasons, this product and its accessories have “Bluetooth Headset Performance Failure” Performance failures listed in Table.

Customer service information

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.
• Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>