Shenzhen DT WC03B Wireless Car Charger And Phone Mount Instruction Manual

Shenzhen DT WC03B Wireless Car Charger And Phone Mount

Product Information

Specifications

• Input: 9V2A
• Output: 5W/7.5W/10W/15W

Product Usage Instructions

Connecting the Charger

• Ensure your device is compatible with the output power options provided by the charger (5W, 7.5W, 10W, 15W).
• Connect the charger to a power source using a compatible cable.

Charging Your Device

• Plug the charger into your device’s charging port securely.
• Ensure the device is placed on a flat surface during charging.
• The charger will automatically adjust the power output based on your device’s requirements.

Charging Indicator

• A charging indicator light may be present on the charger to show the charging status.
• Refer to your device’s manual for specific charging indicator meanings.

Frequently Asked Questions (FAQ)

• Q: Can I use this charger with devices that require less than 5W output?
  A: Yes, the charger will adjust the power output to match your device’s requirements, starting from 5W.

• Q: Is it safe to leave my device charging overnight with this charger?
  A: It is generally safe to leave your device charging overnight, but it is recommended to unplug it once fully charged for optimal battery health.

PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE.

Getting started

• Remove the product from the box.
• Please retain all packaging after you have checked and counted all the
• parts and the contents against the list.

Package Contents

• Universal Car Vent Holder with Wireless Charger
• USB cable
• Instruction Manual

Key Features

• Universal Car Vent Holder with Wireless Qi Charger
• Convenient to charge, wireless, hassle-free & great looking
• Just charge your phone by placing it on this vent holder immediately
• No need to attach any cable to the phone
• Suitable For Qi Compatible Phones Like: iPhone 14/14plus /14 Pro/14 Pro Max/13/ 13 Pro/ 13 Pro Max/ 13 mini, iPhone 8/ 11/ 12/ X/ XR/ XS/ XS Max, Samsung Galaxy S22 / S22 Ultra / Z Flip 4 /W23/ S21/ S21+/ S21 Ultra/ S20/ S20+/ S10/S10+/ S9/ S9+, HTC, Nexus & More
• Micro USB cable included

Safety Instructions

• Keep the product away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the product if it has been exposed to water, moisture or any other liquids to prevent electric shock, explosion and/ or injury to yourself and damage to the product.
• Do not use the product if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not use the product with wet hands.
• Do not put objects into any of the openings.
• Keep the product free from dust, lint etc.
• Do not use this product for anything other than its intended use.
• Keep the product out of reach of children.
• This product is not a toy.

Description of Parts

INSTRUCTIONS FOR USE

• Connect one end of the USB cable (included) to the Micro USB port under the unit, and the other end of the cable to the USB DC 5V source inside your car. The red light around the unit will turn on.
• Press the lock button to release the front clamp and secure the unit onto the grill of the air vent.
• Then, secure your phone safely and tightly with the phone mount.
• Wireless charging of the phone will start immediately, with the Red light around the unit turning to Blue.
• Remove your phone from the phone mount after fully recharging.

IMPORTANT:
Some phone cases do not support Wireless Charging due to their thickness and design. If your Phone model is compatible with Wireless Charging and you’re unable to charge it wirelessly, please remove your phone case and retry.

Steps to disassemble the mounting clamp

1. Turn the knob counterclockwise to loosen it.
2. As the knob is fully unscrewed, pull the mounting clamp out of the phone holder.

REMARK:
Reverse the above steps to assemble the mounting clamp again.

Care and Maintenance

Read the following recommendations before using the product.

Following these you will be able to enjoy the product for many years.

• Do not expose the device to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
• Don’t use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperatures as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
• Don’t dispose of the device in a fire as it will result in an explosion.
• Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
• Don’t let the device fall on the floor. The internal circuit might get damaged.
• Don’t attempt to disassemble the device as it may get damaged if you are not professional.

Specifications

• Input: 9V2A
• Output: 5W/7.5W/10W/15W

Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority for recycling advice.

FCC Warning

This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This product may cause interference to radio equipment and should not be installed near maritime safety communications equipment or other critical navigation or communication equipment operating between 0.45-30 MHz.

This equipment must be installed and operated with a minimum distance of 15 cm between the radiator and the user body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>