Shenzhen Carolx 2A3ZTW10 Multifunctional Bluetooth Speaker With Night Light User Manual

Shenzhen Carolx 2A3ZTW10 Multifunctional Bluetooth Speaker With Night Light

Product Parameters

Product Introductions

1. Speaker Grille
2. Top Button
3. Speaker
4. Speaker Diaphragm
5. Lampshade
6. Light Cover
7. LED Display Screen
8. TF Card Slot
9. Type-C Charging Port
10. USB Socket
11. Bottom Button
12. Vents
    

Operations & Functions

LED Display Screen Shows:

Top Buttons

Functions Instructions

| Long Press Power On / Off, Short Press Bluetooth On / Off, When the TF Card / USB is recognized, Short press to switch Bluetooth / TF Card USB play /OFF.
---|---

| Long press to set the alarm①( Time / Ringtone / Ringtone Volume / ON / OFF ), Short press to turn ON/OFF alarm ① .

| Long press to set the alarm②( Time / Ringtone / Ringtone Volume / ON / OFF ), Short press to turn ON/OFF alarm ② .

| In alarm or time setting mode: short press to decrease time, long press to quickly decrease,

| In alarm or time setting mode: short press to increase time, long press to quickly increase,

| Short press to switch between 12 hours/24 hours, long press to enter time setting.
| Short press to adjust the brightness of the display screen, Long press to select 30/60/90 minutes timer.
Speaker Grille| Tap to switch between 7 lighting modes: Low brightness/ Medium brightness/High brightness/Colorful cycling gradient/Customized light color/Colorful breathing gradient/Rainbow cycling; Long press the metal Grille to turn off the lights; When the alarm goes off, a single tap activates the snooze function, while a 3-second long press stops the alarm function.

Bluetooth / TF Card / USB Disk User Guide

1. Long press to power on/off, Short press to turn on Bluetooth after power on, short press again to turn off Bluetooth. LED screen shows” BT” icon flashing when not connected. When the Bluetooth connected successfully, the ” BT ” icon on the LED screen is always on. When the TF Card / USB Disk plugged in, music will be played automatically, when the TF Card / USB is recognized, LED screen shows ” TF ” icon flashing.
   Short press to switch the Bluetooth / TF Card / USB play / OFF.
   

Bluetooth function

Short press the turn on the bluetooth after power on, connected or disconnect both have voice remind.

1. Music playing mode: Press / to play / pause music. Users can control the multimedia play via mobile phone.
   Long Press  to increase the volume. Short press  to play the next song.
   Long press to decrease the volume. Short press  to play the last song.

2. How to connect the device via Bluetooth : First , turn on the device to enter the Bluetooth mode . Then , users need to turn on the Bluetooth of the Mobile Phone / MID / Computer or other devices and select the Bluetooth named ” W10 ” to connect. When the connection is successful, you will hear a beep. When you re-enter the Bluetooth mode. the connected device will automatically connect to the device when you open the Bluetooth mode.

Alarm clock using guide

1. Short press turn on the alarm, long press to enter the hour setting, and short press to switch the minute setting. Meanwhile, the LED screen minute’s numbers flash, Short press again to enter the alarm music selection, LED screen display Short press  turn to enter the alarm clock music volume adjustment and the LED screen displays  Short press and to reduce and increase the volume, Long press to quickly reduce and increase the volume. When finished the setting, the alarm icon or will be list on the LED screen.
   

Description of snooze function

1. 30 minutes before the alarm goes off, it enters the light wake up The white light gradually brightens, and when the alarm time is reached, the light becomes the brightest. Touch the” speaker grille to activate the snooze function. The LED display scree icon lights, and both the light and the sound turn off. After 9 minutes, the light and alarm turn on again. After snoozing 3 times, the alarm is turned After the alarm goes off, touch the” speaker grille ” twice IN succession to turn off the alarm for the day.

MP3 playing function

When the TF card / USB Disk was inserted, it will automatically entrée MP3 play mode with a prompt sound.

1. Short press /  key to play / pause music.
2. Long press  key to increase the volume. Short prese to play the next song.
3. Long press  key to decrease the volume. Short press  to play the previous song.
   

Time setting

Short Press to switch the 12-hour or the 24-hour system. Long  press to enter the time setting, Short press or to reduce or increase the hour, Long press to quickly reduce or increase the hour. Short press again to switch the minute setting, hurt press or to reduce or increase the minute, Long press to quickly reduce or increase the minute. Remark： The LED screen displays ” AM ” or ” PM ” in the 12-hour system.

Sleep setting

Short button to adjust the brightness of the LED display screen, long press to select the 30, 60, and 90 minutes sleep. timer. If the LED screen icon turns off, it means the sleep function is turned off. The sleep function setting only work sin one time. If you need to use this function again, please reset it.

Night light function instructions

There are 7 light modes available on this device , which can be selected by touching the speaker grille

1. Low Brightness: The light brightness is set to 30%, creating a soft illumination.
2. Medium Brightness: The light brightness is set to 60%, providing a moderate illumination.
3. High Brightness: The light brightness is set to 100%, producing a bright illumination.
4. Colorful Gradual Change: The light color change between different colors
5. Customized Light Color: In the Colorful Gradual Change mode, tap the speaker grille when encountering a desired color. The light will remain constant in that color instead of changing
6. Breathing Gradual Change: The light color gradually transitions, with the in the light fading in and out during color changes.
7. Rainbow Cycle: The light cycles through various vibrant colors.
   

Equipment power supply and charging instructions

1. DC 5V Power Supply.
2. Power supplied by a built-in lithium battery (cannot be dismantled).
3. When charging, connect a 5V/1A power source to the device’s Type-C charging port. During charging, the display screen will show a blinking charging icon. Once the battery is fully charged, the icon will stop blinking and the icon stays on.
4. Please have the device fully charged if it has never been used in the past month, to keep the lithium battery healthy.
5. Battery indicator light:
   

Trouble Shooting

No Power|

1. Please confirm if the battery has charge.
2. Whether the Type-c is plugged in properly.

---|---
No Sound or distorted sound|

1. Make sure whether the volume is at 0.
2. Damaged songs may produce varying degrees of noise or may not play music at all. Please ensure that the music file is valid and not corrupted.
3. Please check if the battery was low power.

Program Frozen| Press and hold the button  to restart the device or plug it in for charging and then turn it on again.

Technic specifications

hours ( maximum volume ) Note: It depends on the volume and the sound effect of the song.
MP3| Output Power| 10W
MP3 Bit Rate| 8K bps – 320K bps
SNR| ≥85dB
THD| ＜ 0.55%
Audio Format| MP3
Operating Temperature| -5 to 40°
Power| Speaker power 10W / warm white light 2W / RGB lantern 1.5W
TF Card Slot USB Port| MP2、MP3、WMA, and other audio formats
Light Sources| Specifications| Warm White Light 2835+ RGB Colorful 5050
CCT| 2800-3200K
SDCM| <6
CRI| >80
Frequency response range| 80HZ-18KHZ
SPK| Diameter 52mm / 4Ω 10W, with diaphragm

Notes : The appearance, functions , and specifications of the product are subject to the actual item. If there are any discrepancies from the actual product , we apologize   for any inconvenience caused by the delay in up datie the information.

FCC WARNING

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction

Customer Support

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>