vsitoo S3 Smart Mug User Guide

vsitoo S3 Smart Mug

Induction

Parameter

• Name : VSITOO Smart Mug
• Model : S3
• Product weight : 430g
• Capacity : 300ml
• Color : Black/White
• Waterproof Level : IPX7
• Liner Material : 304 Stainless Steel
• Built-in Battery: 2500mAh
• Size: 112X86.5Xll7mm

Packing list

• Smart Mug Xl
• BPA Free Lid Xl
• Charging Coaster Xl
• Power Adapter Xl
• User Guide Xl

usage method

• Power on/Power off
  

Take a long press on the power button for 3 seconds to tum on, the icon” ” zwill appear on the LED screen.
Take a long press on the power button for 3 seconds to tum off, the icon ” l ” will appear on the LED screen.

APP Connection

• Ready to connect:

1. Please make sure that the battery was charged for at least half an hour before first use;
2. Please make sure that the mug is turned on and has enough power;

• Connection Steps:

1. .Search “vsitoo” in APP store /Google store , download and install app;
   
   

2. Sign up and Log in;
   

3. Add your mug and built the connection follow the instruction.
   

4. 0pen the APP to add and connect the mug.
   Step l – Add the device
   
   Step 2 – Scan the connection
   

5. lf the heating cup vibrates after the successful connection, the cup can be controlled via the APP.

• Temperature setting
  
  

Press the button the bottom of the heating cup to set any temperature within the range of 95 ~ 149’F as the target temperature, or set the cup to the STOP mode to stop heating. When the target temperature is set, the cup will enter the thermal insulation mode automatically after 3 s. When the cup is heating, the upper left corner the screen will rotate continuously; when the rotation stops, the water reaches the target temperature.

• Status description

Battery life:
When the icon” ” flashes, please put the mug on the charging base in time to charge. When the power is below 20%, the mug will automatically stop heating.
Empty Cup:

The system automatically starts the overheating protection mode when the mug is empty to ensure safety. this icon” ” means the mug is in overheating protection mode.

• Safety Setting

Step 1
Click the icon”:” in the upper right corner

Step2
Choose Auto Sleep or Overheat Protection

Auto Sleep

You can choose to let the mug go to sleep after 2 hours/4 hours/6 hours, and the mug will stop heating or keep warm when the time is up.

Overheat Protection

If this setting is on, the mug will stop heating when it is empty.
{To avoid sediment in the cup or the liquid is too thick, it will be mistakenly judged that the empty cup and will enter the anti-dry burning mode.)

Attention

• Do not put it in the microwave, dishwasher, refrigerator or freezer;
• Do not bump or drop the mug, otherwise the sensor may be damaged, which will affect the measurement accuracy of the mug;
• The waterproof grade of the mug is IPX7, it can be cleaned normally, but please do not soak it in the liquid for an extended period of time;
• Please dry the mug before putting it on the charging base;
• When using a metal spoon, use it carefully to avoid scratching the Mug’s liner;
• Please use a metal spoon carefully to avoid scratching the coating on the inner wall;
• Please keep out of the reach of children when the mug is filled with hot drink;
• Do not fill the mug too full with hot drink to avoid burns caused by spillage;
• Do not use steel balls, bleach or other corrosive acid-base solvents to clean the mug;
• Be careful to avoid steam bums when holding the mug or opening the lid.

PAY ATTENTION!!

The following condones are not covered by the warranty:

• Failure and damage caused by disassembly .modification and repair without authorization;
• Failure or damage caused by incorrect use;
• Failure or damage caused by human factors;
• Warranty period exceeded;
• Product purchased from unauthorized dealers.

Warranty Policy

• The product is guaranteed for one year from the date of purchase.

• You can contact market customer service to exchange for a new replacement or get a refund within the valid return date firstly.

• If your purchase date exceeds the valid return period, please contact us by any of the following methods:

  1. You can submit your request through the Feedback option on the JIMI Pro APP
     ( You’d better attach order number and your contact information so that we can solve the problem for you further );

  2. You can send an email to our customer service mailbox: service@vsitoo.com. Similarly, you need to describe the problem you encountered in detail and attach your order number and product photos so that we can solve the problem for you better;

  3. You can visit our official website and leave your suggestion and feedback, our customer service staff will reply you as soon as possible.

• Please ensure the integrity of the product and packaging when you send it back.

Customer Support

Official Website :http://www.vsitoo.com/
Customer Service Number: 86-0760-87954495
Customer Service Email: service@vsitoo.vip
Manufacturer: Guangdong Jimi You pin Intelligent Technology Co.,L TD
Address: Tongmao Industrial Avenue, xiaolan Town ,Zhongshan City,
Guangdong Province
Customer Service Email: service@vsitoo.vip

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>