HB-8805 5 In 1 Immersion Hand Blender User Manual

HB-8805 5 In 1 Immersion Hand Blender

( Model : HB-8805 )
Thank you for choosing our 5-IN-1 Immersion Hand Blender!
Please read the user manual carefully before use and keep it on hand for future reference.

Safety Precautions

When using electrical appliances, basic safety precautions should always be followed including the following:

1. Before plugging into a socket, check whether your voltage corresponds to the rating label of the appliance.
2. Read all instructions.
3. The use of attachments not recommended or sold by the manufacturer may cause fire, electric shock or injury.
4. Always disconnect the blender from the supply if it is left unattended and before assembling, disassembling, cleaning.
5. Don’t plug the appliance into the power supply until it is fully assembled and always unplug before disassembling the appliance or handle the blade.
6. The blades are very sharp! Handle carefully!
7. To protect against risk of electrical shock do not put motor unit. cord, or plug in water or other liquid.
8. This appliance should not be used by children and care should be taken when used near children.
9. Do not let cord contact hot surface, including the stove.
10. Do not blend hot liquids.
11. Neither the measuring beaker, nor the chopping bowl is microwave proof.
12. Short – time operating (three times only). Use the appliance to operate soft food for no longer than 1 minute, and operate hard food for no longer than 15 seconds. Operated 5 cycles for one use.
13. Be certain cover is securely locked in place before operating appliance.
14. Potential injury may obtained from misuse. care shall be taken when handling the sharp cutting blades, emptying the bowl and during cleaning.
15. Children should be supervised to ensure that they do not play with the appliance.

Specifications

Product Descriptions

How to use

How to use your hand blender
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food as well as for mixing and milkshakes.

1. Insert the blender stick onto the motor unit until it locks.
2. Introduce the hand blender in the vessel and to keep it upright when blending. Then control the speed you need by the strength of your grip.
3. Unplug then press the ejection button to remove the blender stick after use. You can use the hand blender in the measuring beaker and just as well in any other vessel.
4. Caution: the blade is very sharp!

How to use your chopper

1. Chopper is perfectly suited for hard food, such as chopping meat, cheese, onion, herbs, garlic, carrots, walnuts, almonds, prunes etc.
2. Don’t chop extremely hard food, such as ice cubes, nutmeg, coffee beans and grains.

Before chopping

1. Carefully remove the plastic cover from the blade. Caution: the blade is very sharp! Always hold it by the upper plastic part.
2. Place the blade on the center pin of the chopper bowl. Press down the blade and lock bowl. Always place the chopper bowl on the anti-slip base.
3. Place the food in the chopper bowl.
4. Place the chopping bowl lid on the chopper bowl.
5. Place the motor unit on the chopper bowl lid until it locks.
6. Press switch to operate the chopper. During processing, hold the motor unit with on hand and the chopper bowl the other.
7. After use, unplug then press the ejection button to remove the motor unit.
8. Then remove the chopping bowl lid.
9. Carefully take out the blade.
10. Remove the processed food from the chopper bowl.

Processing Guide

(for 500mI chopping bowl)

How to use your whisk

Use the whisk only for whipping cream, beating egg whites and mixing sponges and Ready-mix desserts

1. Insert the whisk into the whisk holder, then slot the gear box onto the motor unit until it locks.
2. Place the whisk in a vessel. Then control the speed you need by the strength of your grip
3. Unplug then press the ejection button to remove the gear box after use. Then pull the whisk Out Of the gear box.

How to use your milk frother

Use the milk frother to make the delicious milk foam for your coffee or drinks

1. Insert the frother into the holder, then slot the gear box onto the motor unit until it locks.
2. Place the frother in a vessel Then control the speed you need by the strength Of your grip.
3. Unplug then press the ejection button to remove the gear box after use.

Introduction of Infinitely Variable Speed Switch

1. Olnsert the power plug into the socket.
2. Press the smart speed switch, no extra hands are needed to help adjust the speed
   Adjust the speed by using the strength Of your hand. (As picture show)

Before disassembling, be sure to unplug the power plug. Do not touch directly.
Depending on how hard you press the smart speed switch, you can steplessly adjust the rotation speed to your desired speed.

Cleaning

Note : Cleaning the motor unit and chopping bowl lid only with a damp cloth only. Do not immerse the motor unit in water!

1. All other parts can be cleaned in the dish washer. However, after processing very salty food, you should rinse the blades right away.
2. Also, be careful not to use an overdose of cleaner or decalcifier in your dishwasher.
3. When processing food with color, the plastic parts of the appliance may become discolored. Wipe these parts with vegetable oil before placing them in the dishwasher.
4. The blades are very sharp, please attention.
5. Unplug the appliance before cleaning.

Warranty and After-Sales Service

When making a warranty claim, please make the original purchase checklist with the purchase date ready. Once your device is confirmed to be eligible for warranty service, please contact the store customer service where the product purchased.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>