SOERDMX ZQ02239 Four Snow Storm Stage Beam Moving Head Light User Manual
- May 15, 2024
- SOERDMX
Table of Contents
12 LED Snowstorm Light
User’s Manual
Thank you very much for purchasing 12 LED snowstorm light. For your personal safety and better use of this product, please read this manual carefully before use and follow the instructions to avoid personal injury and damage the lamp.
Packing List
Please check if you have the following items when you open the light box:
12 LED snowstorm light ············ one
Accessories ············ one
Manual ············one
Technical parameters
Power supply: AC90~220V ,50Hz/60Hz
Rated power:160W
LED angle:5°
Lamp beads parameters: 1210W RGBW 4 in 1 lamp beads, 1 100MW red LED, 1
50MW
green LED, LED strobe 220W
Control mode: international general DMX512, 16/64 channels
Dimming method: 0~100% ultra-smooth dimming
Working mode: DMX512, master/slave, auto, sound control
Packing mode: air box/carton
Inner box size:373721cm
Carton size:763946cm(4 PCS/carton)
N.W:7.2KG
G.W:7.5KG
Carton weight:31.5KG
Instructions for use:
After opening the box, carefully check whether the lamp is damaged due to
transportation, such as whether the screws are loose, whether the lens is
broken, etc. Please check before powering on. Check whether the lamp is placed
in the correct and stable position, and check whether the power supply voltage
is the same as that of this product. This equipment belongs to Class 1
protection equipment, so the ground wire of the power supply must be grounded
and completed by professionals. Check whether the power supply voltage is
normal before use.
Display function: This product adopts display mode operation mode and DMX
mode operation mode, the specific settings are as follows:
Addr | A001-A512 | 5 12 Address settings |
---|---|---|
Chnd | 16CH | 16-channel setup |
64CH | 64 channel setup | |
SLnd | MAST | Host self-propelled mode |
Soun | Host voice mode | |
SL 1 | Console mode | |
SL 2 | Secondary mode | |
SHnd | SH 0 | Effect 0 (recommended) |
SH 1 | Effect 1 | |
SH 2 | Effect 2 | |
SH 3 | Effect 3 | |
SEnS | 0-99 | Voice sensitivity body adjustment |
REST | YES | System reset |
DMX channel function
This product adopts standard DMX-512 signal and has 16/64 control channels in
total. The specific control content is as follows:
16 Channel mode
Channel | Display | Function |
---|---|---|
1 | 0-127 | The X motor runs |
128-191 | X motor has no and positive rotation | |
192-255 | X motor has no and reverse | |
2 | 0-255 | The Y1 motor runs |
3 | 0-255 | The Y2 motor runs |
4 | 0-255 | The Y3 motor runs |
5 | 0-255 | The Y4 motor runs |
6 | 0-255 | LED total dimming |
7 | 0-9 | not |
9-249 | LED strobe adjustment, from slow to fast | |
250-255 | Motor reset | |
8 LED effects | 0-5 | No effect |
6-128 | Self-propelled effect 1-15 | |
129-255 | Voice control effects 1-15 | |
9 Motor effect | 0-15 | No effect |
--- | --- | --- |
16-128 | Self-propelled effect 1-4 | |
129-255 | Voice effects 1-4 | |
10 | 0-255 | Speed/voice sensitivity |
11 | 0-255 | 0-255 Red 1-9 brightness adjustment |
12 | 0-255 | 0-255 green 1-9 brightness adjustment |
13 | 0-255 | 0-255 Blue 1-9 brightness adjustment |
14 | 0-255 | 0-255 White 1-9 brightness adjustment |
15 | 0-2 | No effect |
3-23 | Red LED light | |
24-43 | Green LED light | |
44-63 | Reddish-green LED light | |
64-127 | Red LED stroboscopic (from slow to fast) | |
128-191 | Green LED stroboscopic (from slow to fast) | |
192-255 | Red-green LED stroboscopic (from slow to fast) | |
16 | 0-127 | Strobe white light brightness adjustment |
128-255 | Strobe white strobe (from slow to fast) |
64 Channel mode
Channel | Display | Function |
---|---|---|
1 | 0-255 | The X motor runs |
2 | 0-5 | not |
6-127 | X motor has no and positive rotation | |
128-255 | X motor has no and reverse | |
3 | 0-255 | The Y1 motor runs |
4 | 0-255 | The Y2 motor runs |
5 | 0-255 | The Y3 motor runs |
6 | 0-255 | The Y4 motor runs |
7 | 0-255 | X Y1-4 motor speed |
8 | 0-255 | 0-255 brightness overall adjustment |
9 | 0-9 | not |
9-249 | Strobe adjustment, from slow to fast | |
250-255 | not | |
10 LED effects | 0-5 | No effect |
6-128 | Self-propelled effect 1-15 | |
--- | --- | --- |
129-255 | Voice control effects 1-15 | |
11 Motor effect | 0-15 | No effect |
16-128 | Self-propelled effect 1-4 | |
129-255 | Voice effects 1-4 | |
12 | 0-255 | Speed/voice sensitivity |
13 | 0-255 | 0-255 Red 1 brightness adjustment |
14 | 0-255 | 0-255 Green 1 brightness adjustment |
15 | 0-255 | 0-255 Blue 1 brightness adjustment |
16 | 0-255 | 0-255 white 1 brightness adjustment |
………………………
56| 0-255| 0-255 Red 9 brightness adjustment
57| 0-255| 0-255 Green 9 brightness adjustment
58| 0-255| 0-255 Blue 9 brightness adjustment
59| 0-255| 0-255 white 1 brightness adjustment
60| 0-255| 0-255 White 1-9 brightness adjustment
61| 0-127| Red LED light
128-255| Red LED stroboscopic (from slow to fast)
62| 0-127| Green LED light
128-255| Green LED stroboscopic (from slow to fast)
63| 0-127| Strobe white light brightness adjustment
128-255| Strobe white strobe (from slow to fast)
64| 250-255| reposition
Care and maintenance:
- Do not keep your eyes facing the semiconductor light-emitting body for a long time, so as not to hurt your eyes;
- Try to prevent dust, dirt and e-liquid from being artificially laid or even flowing into the lamp body, and keep the product as clean as possible in the use environment;
- Please use professional glass cleaner regularly every month and clean the lens with flannel to ensure maximum brightness output and prolong the service life of the light source.
Attention
Special precautions for installation: all lamps suspended, hung, fixed at
height and laid horizontally must be secured with safety ropes or other means
for the second time in addition to the normal light hook during installation
to prevent falling and injuring people. The installation process without the
second safety fixation has potential safety hazards and cannot be accepted.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>