AMOROSO Single Stroller Baby Stroller with Four Wheels User Manual
- May 15, 2024
- AmorosO
Table of Contents
AMOROSO Single Stroller Baby Stroller with Four Wheels
TO ASSEMBLE REAR WHEELS
Step 1. Remove and discard protective sleeve from ends of rear axle
assembly rear leg tubes.
Step 2. Position rear axle assemblies onto rear leg tubes at the same
time.
Step 3. Slide wheel onto axle.
Step 4. Slide washer onto axle.
Step 5. Fit straight part of cotter pin through hole on axle.
Step 6. Line up each of the tabs in the hubcap with the slots in the
wheel. Snap hub cap into place. Fit cover to firmly pressing the cover into
place.
Step 7. Repeat for the other side.
INSTRUCTIONS FOR USE
Step 1: Push levers on both rear wheels down to lock.
Step 2: Pull levers up to lock.
FOLDING THE STROLLER
Step 1. Before folding the stroller, lock the brakes and close the
canopy.
Step 2. Standing behind the stroller, pull up on both side latches.
Step 3. Fold as shown.
NOTE: Fold stroller so wheels straddle frame.
DO NOT allow the wheel to press against the frame as this may damage the
tires.
CAUTION!
Secure the child in the restraint. Never leave a child unattended.
WARNING!
Placing parcels and/or accessory items on this unit may cause the unit to become unstable.
MAINTENANCE
Please check and maintain the stroller on a regular basis to avoid injury or accident.
- Please check carefully if the operation is not smooth when folding and opening, and please follow the instructions to avoid unnecessary damage.
- Please avoid cleaning the fabric with a brush.
- Checking on a regular basis to see if the rivets are loose, broken, or have parts that are damaged. Please replace the damaged part if necessary.
- Periodic inspection to de, termini whether the rivet is loose, broken, or damaged. If necessary, please replace the damaged components.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>