VISFLAIR 2 Pack Solar Powered LED Outdoor Garden Deck Instruction Manual
- May 15, 2024
- VISFLAIR
Table of Contents
VISFLAIR 2 Pack Solar Powered LED Outdoor Garden Deck
READ THE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND INSTALLATION
IMPORTANT: DOUBLE-CHECK CONTENTS BEFORE DISCARDING THE PACKAGING TO PREVENT LOSING PARTS THAT ARE NEEDED FOR ASSEMBLY.
PARTS LIST
CHARGING AND OPERATION
- Press the button which is located underneath of part “A” to “ON” position for charging. Charge the solar product by placing it under direct sunlight for at least 8 hours. Recommend longer charging time for the first time use.
- The light will work automatically. It will automatically charge under direct sunlight during the daytime and illuminate at night.
NOTE: To verify that the button is correctly in the “ON” position, cover the solar panel with your hand and light should turn “ON” automatically.
ASSEMBLY INSTRUCTION
REPLACING THE BATTERY
- Step 1: Remove the screws to open the battery cover.
- Step 2: Remove the old battery and replace with a new 1.2V AA (14500) NI-MH battery.
- Step 3: Close battery cover and tight up the screw, To make sure the solar light is fully charged in a sunny day.
WARNING:
- Do not throw battery in waste stream or fire as it may explode.
- Do dispose of batteries by Local, State, and Federal regulations.
- Do not change each electronic parts as toy except replace battery.
- Do not mix old and new batteries.
- Do not mix alkaline, standard (Carbon-Zinc) or rechargeable CNI-CD/NI-MH) batteries.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>