Huansheng Smart Mini Cutting Robot User Manual
- May 15, 2024
- Huansheng
Table of Contents
Huansheng Smart Mini Cutting Robot
Product Information
Specifications
- Compliance : FCC
- Minimum distance : 20cm between radiator and body
Product Usage Instructions
To ensure compliance with FCC regulations and for optimal safety, please follow these usage instructions:
Installation
1. Install the equipment in a location where there is a minimum distance of 20cm between the radiator and your body.
2. Ensure that the equipment is placed in an uncontrolled environment as per FCC guidelines.
Operation
1. Operate the equipment following the manufacturer’s guidelines.
2. Maintain a minimum distance of 20cm between the radiator and your body during the operation.
Maintenance
1. Regularly check and clean the equipment to ensure proper functioning.
2. In case of any issues, refer to the user manual for troubleshooting steps.
FAQ
- Q: What is the minimum distance required between the equipment radiator and the body?
- A : The minimum distance should be 20cm as per FCC regulations for RF exposure limits.
- Q: Can I operate the equipment closer than 20cm to my body?
- A : It is recommended to maintain a minimum distance of 20cm to ensure compliance with FCC guidelines and for safety reasons.
Product List
Appearance and Functionality
Instructions for Use
- Smart Mini requires a Bluetooth connection to a smartphone for operation.
Warning!
Caution against sharp cutting blades. Do not place fingers on the sharpblade
tip or inside the machine.
- Download the Smart Mini app from your phone’s app store and complete registration as per the app’s instructions.
- Ensure the machine is plugged into a power outlet; the breathing light will start flashing, indicating successful startup.
- From the app’s main interface, select the cutting project, click to add it to the canvas, and connect the machine’s Bluetooth to the canvas.
- You can now use your Smart Mini.
Product Specifications
For your safety and to prevent damage to the S1 household engraving machine, it’s important to read and understand this manual before operating the machine. This device is not suitable for individuals with disabilities (including physical or mental impairments), children using it independently, or individuals lacking experience and relevant knowledge. During operation, keep flammable or explosive materials and pets away from the machine.
When replacing cutting blades, ensure the machine is turned off and unplugged from the power outlet. Use and store the machine in a dry area away from moisture.
When not in use, turn off the machine, unplug it, and remove the power plug from the socket. Clean the exterior using a lightly damp cloth. Only use the power adapter provided with the machine. Using other adapters may pose risks.
Notice
The content of this manual is subject to occasional revisions due to product upgrades and may slightly differ from the actual product. Please refer to the actual product for precise information. Thank you for your understanding!
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device.pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is no guarantee tha interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/Ty technician for help.
Caution : Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment, This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>