Earths Water 9L Glass Benchtop Water Filter Instruction Manual
- May 15, 2024
- Earths Water
Table of Contents
Earths Water 9L Glass Benchtop Water Filter Instruction Manual
Glass Benchtop Water Filter
Tap Assembly
The tap consists of: the tap itself, 2 x rubber seals, 2 x metal seal caps and a nut that tightens all pieces
-
Separate Parts
Undo the nut, metal seal caps and rubber seals from the tap and ensure you have the tap, 2 x rubber seals, 2 x metal seal caps and a nut to fasten the pieces together. -
Insert TapAdd
1 x metal seal cap, followed by 1 x rubber seal to the tap thread and insert the tap into the product main body ensuring the rubber seal is on the outside of the product body. -
Ensure Water
Seal Add the second rubber sealto the tap from the inside of the main body, then add the second metal seal cap against the rubber seal. You should now have a rubber seal on each side of the product main body and a metal cap securing each rubber seal -
Tighten Tap
Now add the nut from the inside of the main product body against the metal seal cap and tighten with care by hand until a firm grip is achieved and does not move. If required, use the provided spanner to very carefully tighten
Bamboo Base Assembly
-
Attach legs to base Remove the bamboo legs from their packaging and attach the 3 x legs in the
3 x slots of the bamboo base. Ensure they are pushed into the base firmly and as far as possible to leave no gap between them. -
Screw in the legs
Turn the base upside down and screw in each of the legs with the provided screws andscrewdriver (or carefully with a drill). There are no guide holes as bamboo is softer than hardwood so be careful not to overtighten screws as this may cause damage to your base.