CHARVONIA TDR-01 Billet D-Rings Toyota Tacoma Installation Guide
- May 15, 2024
- CHARVONIA
Table of Contents
Billet D-Rings – Installation Guide
Application: Toyota Tacoma
TDR-01 Billet D-Rings Toyota Tacoma
- Remove factory D-Ring bolts using a T40 Torx bit.
- Apply a light coating of grease under the bolt head and insert the factory bolt through D-Ring.
- Reinstall factory washers and provided plastic retaining washer, then apply blue Loctite to the threads of the factory bolt.
- Thread assembly back into bed and securely tighten.
- Never exceed your vehicle’s load capacity.
- Use multiple straps to spread load and provide redundancy.
- Check bolt tightness before using Billet D-Rings.
TDR-01
Patent Pending
info@billettiedowns.com
Documents / Resources
|
CHARVONIA TDR-01 Billet D-Rings Toyota
Tacoma
[pdf] Installation Guide
TDR-01 Billet D-Rings Toyota Tacoma, TDR-01, Billet D-Rings Toyota Tacoma,
D-Rings Toyota Tacoma, Toyota Tacoma, Tacoma
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>