HTVRONT Heat Press Machine for T Shirts User Guide

HTVRONT Heat Press Machine for T Shirts

Really Outstanding, Never Temporary

• Email: support@htvront.com
• FB: www.facebook.com/htvront
• Pinterest: www.pinterest.com/htvront
• Web: www.htvront.com
• INS: www.instagram.com/htvront

Heat Press

HTVRONT HPM10-2 10″*10″ Heat Press Limited Warranty

• HTVRONT warrants this product as free since the date of purchase, the product can enjoy the warranty service if it fails during normal use in the following period. Customers need to provide a proof of purchase if they need warranty service. The warranty period is one year from the date of purchase, and other genuine accessories are guaranteed free within three months from the date of purchase. This limited warranty does not cover damage caused by improper use or unreasonable maintenance (including damage caused by external forces).
• To the extent permitted by applicable law, HTVRONT shall not be liable for any direct, indirect, incidental or consequential losses caused by the use or maintenance of the HPM10-2 heat press machine. The above guarantees and remedies do not include any other guarantees, whether it is oral, written, express, legal or implied. HTVRONT disclaims all statutory and implied warranties, including without limitation, warranties of merchantability and fitness for a particular purpose and warranties against hidden or latent defects, to the extent permitted by applicable law. The duration of guarantee allowed and rejected is limited to the duration of this guarantee.
• Proof of purchase may be required to verify warranty eligibility.

Simple Operation Convenient Setting

Setting as below
Turn on the power, press the Temperature/Timer button and adjust value with plus ( ) or minus(-) button. When it’s heating up to set temperature, press the Timer- R button to start the countdown. A beep signals time is up.

Instructions and Cautions

1. Please check the correct supply voltage 120V before use.
2. To prevent leakage and other dangers, please use this product in accordance with the manual, do not use it for other purposes.
3. Do not play with the product, use it away from children, animals and plants.
4. Do not use this product outdoors, HPM10-2 heat press for home use only.
5. Please check the power cord regularly to prevent accidents. When the power cord is damaged, the power cord must be replaced only by the manufacturer or qualified service agency professionals.
6. Heat plate, safety base and insulation base are at a high temperature when used, please do not touch to prevent burns.
7. Please operate this product on a flat and steady surface. The product must be placed on the safety base when not used.
8. Do not use this product in a humid environment.
9. To avoid accidents, do not immerse the product, power cord and power plug in water. Do not let the power cord get to the heat plate when in use, and do not rinse the product with any liquid.
10. When using this product, please don’t walk away to avoid accidents.
11. This product is a heater function product. After use please wait until the product is completely cooled down before checking and storing to avoid burns.
12. When unplugging, you must hold the plug by hand, do not try to pull the power cord directly to pull the plug out.
13. This product is not intended for the weak, slow, mentally challenged or lack of experience and common sense (including children), unless under the guidance or assistance of the person responsible for their safety.

Attention

• To prevent leakage or other dangers, please turn off the power first after use or before cleaning the machine. When you find the machine or power cord is damaged, please stop using it immediately. Please contact HTVRONT after-sales department and do not repair by yourself.
• When the heat press is left vacant at high temperature for a long time, it may cause the pressure display error, please press and hold the R button to reset the pressure, then it can be used normally.

Let’s start now!

Simple Operation & Convenient Setting

1. Turn on the heat press, set the required temperature and wait for heating up to set temperature

2. Place the clothes on the insulation pad, and position vinyl pattern on the clothes, then place the heat press on the pattern and start the countdown
   There are two ways to apply pressure:

3. light pressure by one-handed or by the machine itself

4. Medium and heavy pressure by two-handed

5. When the countdown is over, remove the heat press and place it on Safety Base, peel off the pvc film to see the finished project.

Warning:

1. Don’t immerse HPM10-2 heat press in water.
2. Do not touch the high temperature heating parts. (Heat plate, safety base and insulation base are at a high temperature when used, please do not touch to prevent burns. )
   After use please wait until the product is completely cooled down before checking and storing to avoid burns.

• Input Voltage: AC 1 20V 60Hz
• Power Consumption: 1 200W
• Size: 298mm 298mm 131 mm

Looking for Vinyl Options and Services?

Search “HTVRONT” on Google

Specifications

Thank you for purchasing the HPM10-2 heat press machine. Please read the product manual carefully before first use, and keep it for future reference.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>