WAYXIN R15 Pro Motorcycle Bluetooth Headset User Manual

Motorcycle Headset – R15 Pro Bilingual Handbook

Features:

Bluetooth 5.1
Supports group intercom one-button connection
Supports Bluetooth compatible pairing
Support for cell phone voice assistants
Supports hands-free calling
Supports connection to GPS navigation
Built-in DSP and CVC noise reduction
Built-in FM radio
Support for music sharing
Support 6 people Bluetooth group intercom
Supports multi-color shell replacement

Installation Notes:

Secure the metal mounting tabs and brackets slightly first, then install them back on the helmet for a complete fixation

Attach the product to the bracket and mount the two speakers on the inside of the helmet (near your ears). There is a gap in the upper right corner of the product.
You can change the color shell from this perspective

Button Description:

Power on
Long press and hold [Phone button] for 3s
Power off
Long press and hold [phone button] for 4s
Mode Switch
When the power is on, click the [Intercom button] for (Bluetooth Group Intercom Mode)\(Bluetooth Connection) \(Music sharing)\(Bluetooth intercom mode), Four modes cycle switching
Phone Pairing
When the power is off, press and hold [phone button] for 5 seconds to enter the Bluetooth pairing mode;
When power on, long press [FM button] and [phone button] for 2 seconds to enter Bluetooth pairing mode.
(It is forbidden to enter the Bluetooth pairing mode during intercom, and you can enter the cell phone pairing only after hanging up the intercom.)
Reconnect the phone
When the device is disconnected from the cell phone, click the [Phone Button] to reconnect the paired cell phone.
phone control function
Answer the call: Click [Phone button] to answer the call
Hang up: Click [Phone Button] to hang up.
Refuse to answer: Press and hold [Phone Button] for 1 second to refuse to answer.
Auto Answer On/Off (default on).
In standby mode, press [FM Button] and [Intercom Button] at the same time to turn on/off the auto answer function.
(On: blue light flashes 3 times, off: red light flashes 3 times) phone voice assistant: double-click [phone button] to wake up the voice assistant music function
Music play/pause: Click [phone button].
Volume up/down: Click [Volume+] / [Volume-] button to adjust volume
Previous/Next Song: Long press [Volume +]/[Volume -] FM Radio
Turn on FM: Long press [FM button] to turn on the FM radio (in the absence of playing music and connecting intercom state)
Turn off FM: Long press [FM button] to turn off the FM radio.
Next radio station: Long press [Volume-] Previous radio station: Long press [Volume +] Music switching: In the FM radio, click [Phone button], switch to music play Click again to pause the music and wait 10 seconds to return to FM radio.
Restore Factory Settings
Under power on state, long press [phone button] 8s (Don’t release your hand after 3s shutdown and continue to press for 5s, the red light flashes fast 3 times)
Language switch
Short press [Phone Button] and [Volume -] At the same time to cycle through beep languages
Work Priority Level
Phone Mode＞Intercom Mode＞Music Mode＞Music Sharing Mode＞FM Mode
pairing state
Pair the intercom mode first and then pair the phone mode.
Multi-people one button network intercom support up to 6 people, if you need to add more people to use manual join.
Bluetooth intercom mode
The same type of two people intercom pairing:

1. power on state, click the two devices [intercom button] to switch to “Bluetooth intercom mode”
2. in the Bluetooth intercom mode, long press the two devices [intercom button] into the pairing mode (green light flashes)
3. Click one of the devices [intercom button] for intercom search and pairing.
   After successful pairing, it will automatically enter the intercom mode.
   Click [FM button] to disconnect the intercom
   Click [FM button] to connect the intercom.

| Click the intercom button of one of the devices
After successful pairing, it will automatically enter the intercom mode.
---|---
| [FM button] Click to disconnect the intercom /Click to connect the intercom

Bluetooth connection
Pairing with other brands and models

1. Put the other device into the intercom pairing state.
2. our device click [intercom button] to switch to “Bluetooth connection”.
   In Bluetooth dating mode, long press the [intercom button] to enter The pairing mode (green light flashing), then short press the [intercom button] to enter the pairing mode.
   And then short press the [intercom button] for talk pairing, successful pairing can directly enter the intercom mode.
   (power on again and short press the [FM button] enter the intercom mode)
   Click [FM button] to disconnect the intercom
   Click [FM button] to connect the intercom

successful pairing can directly enter the intercom mode.

Bluetooth Group Intercom Mode
(4 devices for example) You need to restore the factory settings first.

1. power on ,Click [intercom button] to switch to “Bluetooth group intercom mode”.

2. In “Bluetooth Group Intercom Mode”, long press the [Intercom Button], all devices enter the green light flashing search state.

3. Click the [intercom button] of any one of the devices (No.1) to enter the intercom search.
   (After connecting to No. 2, No. 1 will “beep” to enter the blue light slow flash,
   No. 2 blue light slow flash once automatically resume the flash search for No. 3;
   No. 2 machine searched for No. 3, No. 2 machine into the blue light slow flash,
   No. 3 machine blue light slow flash once automatically resume flash search for No. 4 machine,
   The last No. 4 machine blue light slow flash.
   (Finally, No. 4 machine blue light slow flash once will resume the fast flash 45s, at this time you can not care)

4. 4 devices have completed pairing (3 devices blue light slow flash, the last device flashes green)

5. After waiting for 3 seconds,
   All the devices will press [FM button] once and enter the group chat after hearing “dudu”.

Connect and disconnect
Double-click [FM button] to disconnect the intercom connection
Click [FM button] to reconnect the intercom connection

Device Reporting Number
(Find out what number the device is):
Short press [Phone button] and [FM button] at the same time

Music sharing
Sharing music between two devices

1. Under the power-on state, click the [intercom button] of both devices to switch to “music sharing”, and then press the [intercom button] of both devices to enter pairing mode.
2. In music sharing mode, long press the [intercom button] of both devices to enter pairing mode (green light flashing).
3. Click one of the devices (the sharer)
   [intercom button] for intercom search and pairing.
   After successful pairing, enter the music sharing mode,(short press once [FM button] can disconnect the music sharing)

Click one of the devices (the sharer)
[intercom button] for intercom search and pairing.
After successful pairing, enter the music sharing mode,

For precautions related to this product, please refer to the following related instructions.

1. If you use a non-original charging cable or charge the product in the rain, we will not be responsible for any accidents caused by the above improper behavior.
2. Please pay attention to the safety of driving when using our products, we will not be responsible for any damage to the products or even personal accidents caused by violation of local government traffic regulations.
3. Drivers need to pay attention to the volume of travel, use this product to talk, should pay attention to driving safety, and will talk to the shortest possible time, such as causing driving disputes, are personal behavior.
4. Long time continuous use of this product, please pay attention to listening to excessive volume is easy to cause hearing loss. When driving, please do not adjust the volume to greater than the surrounding environment sound, so as not to cause damage to others and their own lives and property.

Warranty Description.

1. Normal operation and use of the product leads to failure: built-in motherboard / battery warranty 1 year; charging cable / headset warranty 60 days; appearance / patch supplies without warranty!
2. The product is not covered by free warranty due to external factors such as burning, soaking, disassembling, dropping and other external factors, resulting in product failure or inconsistency in the warranty information provided.

(After-sales contact)
E-Mail : Bertliugd@Gmail.com
Whats app:+8615007054895
Reply to you within 24 H,
Solve the problem for you

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>