Melkelen MK06-BK Ceiling Fan with Lights Instruction Manual

Melkelen MK06-BK Ceiling Fan with Lights

SAFETY INFORMATION

Please read all safety information and instructions before installing the ceiling fan and save this manual for future reference.

WARNING

• Before connecting the power supply, make sure that the power supply used matches the specifications of the ceiling fan.
• All wiring must comply with national and local electrical codes ANSI/NFPA70. If you are not familiar with wiring, please use a qualified electrician.
• To reduce the risk of fire or electric shock, turn off the power to the fuse box or circuit breaker before installing the fan.
• To reduce the risk of personal injury, attach the fan directly to the building’s support structure and ensure that it can accept at least 35 pounds (15.9 kg).
• Make sure that the installation location allows the fan blades to rotate without obstacles.

Installation Location

WARNING

• Do not install the fan with wet hands.
• Do not insert foreign objects between the rotating fan blades.
• Do not bend the fan blades when installing or cleaning the fan.
• Do not disassemble or modify this product or use non-original parts without permission.
• Keep children away from your working area.
• Properly dispose of the fan’s packaging material.
• Make sure the ceiling fan is firmly secure to the ceiling. Double check all connections before you restore power.
• Turn off the fan and wait for the blades to stop completely before performing any maintenance or cleaning.

PRE-INSTALLATION

Tools Required (Not Included)

Parts List

INSTALLATION INSTRUCTION

Step 1: Mounting Bracket Installation

1. Drill holes with electric drill (Cf>8 mm).
2. Use expansion screws to fix the mounting bracket to the ceiling
   Fasten the mounting bracket to the ceiling with self-tapping screws.

Step 2: Fan Blade Installation

1. Install the decorative cover in the screw hole at the bottom of the fan blade
   Note:

2. Install the fan fork label side up.

3. Fan blades need to be aligned with the “center” of the screw hole set.

4. Align the blade fork with the screw holes in front of the fan blades and tighten the screws.

5. Take out the screws on the motor

6. Align the fan blade with the screw hole and tighten the screws.

Step 3: Installation of LED Board

1. Loosen the screws on the motor.
2. Connect the motor line and the lamp panel line.
3. After connecting the wires, place the lamp panel above the motor.
4. Align the screws with the lamp panel and tighten them.

Step 4: Downrod Installation

1. Select a suitable downrod. (3 lengths are available 5″/10″/20″)
2. Take off the setscrew and clevis pin on the downrod.
3. Loosen the screws on the motor, and do not take them out completely.
4. Assemble the canopy, canopy cover and coupling cover to the downrod in turn.
5. Thread the motor wire through the lower pull rod, lock thesetscrew with the clevis pin, and tighten the motor screw.

Step 5: Installation of the Assembled Fan

1. Lift the assembled fan onto the mounting bracket.
2. Ensure the concave groove of the hanger ball is positioned on the hanger lug of the mounting bracket.

Step 6: Wiring Instruction
Shut off the power to the fuse box or circuit breaker before wiring .

• The receiver is connected to the motor power cord and the ceiling power cord respectively.
• Put the receiver into the mounting bracket.

Note:
Connect the wires color to color, plug to plug.

• Loosen the screws.
• Cover the receiver and power cord, tighten the screws.

Step 7: Install the Lampshade

1. Align the Light Cover with the LED Board.
2. Tighten the light cover clockwise.

Step 8: Change Downrod(OPT)
How to choose different lengths of downrod

1. The ceiling distance of the house is 100 inches, which is suitable for installing a 5-inch downrod.
2. The ceiling distance of the house is 110 inches, which is suitable for installing a 10-inch downrod.

If you need to change different length downrod, please follow these steps :

1. Loosen the screws on the hanging ball.
2. Remove the metal bar.
3. Take off the hanging ball from the original downrod.
4. Install the hanging ball to an appropriate downrod.
5. Insert the metal bar and tighten the screws.

OPERATION INSTRUCTION

Control Method

Note:
Sensing Distance: 33 ft – 49 ft (10 m – 15 m) Direction of the fan / Reverse Switch.

Reversible Function

PS : If you want to change the fan’s rotation direction, please press the button while the fan is running.

Timing Control

• 1H: The fan will automatically shut off after 1 hour.
• 4H: The fan will automatically shut off after 4 hours.
• 8H: The fan will automatically shut off after 8 hours.

Close the Timing Control: Press the button FAN OFF “FAN OFF”

SPECIFICATIONS

TROUBLESHOOTING

If there is a problem with the fan during use, please check the following tips for solutions. If the problem still cannot be solved, please contact our after-sales team.

The Fan does not Respond to the Remote Control

• Check that all wire connections are correct and secure.
• Verify that the power is turned on and reaching the receiver.
• Verify that the batteries of the remote control are installed with the correct polarity, making sure to install the (positive) end of the batteries on the solid end and the – (negative) end on the spring.

The Fan Makes a Humming Noise

• Make sure the controls you use are supplied with your fan.
• Make sure all accessories are securely fastened. Loose parts often cause a vibrating noise or buzzing sound.
• Disassembling the fan and reinstalling it can sometimes remedy this resonant vibrating noise.

The Fan Makes a Repetitive Ticking Noise

• Check for obstructions in the rotor path.
• Make sure the mounting hardware at the ceiling is firmly fastened.
• Make sure all other hardware and blade attachments are tight.
• Give the fan a “Break in Period” of a few hours to a few days, then repeat the steps above.

The Fan Wobbles

• Make sure the mounting plate and hardware at the ceiling are firmly fastened.
• Make sure all screw fittings on the fan are tight.
• If necessary, use the self-tapping screws provided to further secure the bracket to the joist.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>