Doraimi Lighting 5040X3 2 Pack 3 Light Semi Flush Mount Ceiling Light Nature Wood Beaded Boho Fixtures Black Finish Instruction Manual
- June 17, 2024
- Doraimi Lighting
Table of Contents
Doraimi Lighting 5040X3 2 Pack 3 Light Semi Flush Mount Ceiling Light Nature Wood Beaded Boho Fixtures Black Finish
Dear customer
Thank you for choosing Our Lighting. If you have any concerns or questions about our products, please do not hesitate to contact us directly. We’ll provide the best service for you. Hope you enjoy the shopping experience!
Assembly Instructions
WARNING:
- It is strongly suggested that all hardwired fixtures be installed by a professional electrician..
- To reduce the risk of fire, electrical shocks or personal injuries, always turn off the light fixture and let it cool prior to replacing the light bulbs.
- Do not touch the bulb when fixture is turned on; do not look directly at a lit bulb.
- Keep flammable materials away from a lit bulb.
- Shut off all the main electrical supply from the fuse box/circuit breaker
- Use E12 TYPE B CFL 6W, LED 4W bulb types and wattages. Do not exceed recommended wattages
SKU: # 5040X3
(Not included the bulb)
Parts included
Part | Description | QTY |
---|---|---|
B | Green Screw | 1 |
D | Mounting Plate | 1 |
E | Canopy | 1 |
F | Canopy Nuts | 2 |
G | Metal Tube | 1 |
H | Fixture | 1 |
I | Metal Tube | 1 |
J | Metal Cap | 1 |
K | Finial | 1 |
L | Hexnut | 1 |
M | Ground Wire | 1 |
N | Flat Washer | 1 |
O | Allen Wrench | 1 |
Hardware enclosed:
Part | Description | QTY |
---|---|---|
A | Wire Connector | 3 |
C | Mounting Screw | 2 |
Step 1:
- Remove all parts and hard ware from box along with all plastic protective packaging.
- Unscrew the pre-assembled Canopy Nuts (F) from Mounting Plate (D).
Step 2:
- Secure Metal Tube (G.I) into Fixture (H).
- Place Fixture (H) on Canopy (E), then secure Hexnut (L), Ground Wire (M), Flat Washer (N) into Canopy (E) with Allen Wrench (O).
- Secure Metal Cap (J) into Metal Tube(I) with Finial (K).
Step 3:
- Gently pull the wire in the ceiling junction box and let the wire hang.
- Attach Mounting Plate (D) to the junction box.
- Secure the Mounting Plate (D) by tightening 2 Junction Box Screw (C) with a screwdriver.
Step 4:
Connect the white wire of the fixture to the white wire of the supply circuit. Connect the black wire of the fixture to the black wire of the supply circuit. Connect the Ground fixture wire with the Ground J-Box wire with the Wire Connector (A).
Step 5:
Place the canopy (E) against the mounting surface and fasten the Canopy Nuts(F) to the Mounting Plate (D)
Step 6:
Install bulbs (not included) into the Socket.
Customer Support
Any questions please free to contact us: Email: [email protected]