Goolifee SS3014RV Handheld RV Shower Head with Hose and Shut Off Valve Instruction Manual
- June 17, 2024
- Goolifee
Table of Contents
Goolifee SS3014RV Handheld RV Shower Head with Hose and Shut-Off Valve
Product Information
Specifications
- Brand : GoolifeeTM
- Type : RV Handheld Showerhead
- Features : On/Off Switch, Full Spray, Strong Spray, Pause Function
- Installation : Easy hand-tighten installation
Product Usage Instructions
Step 1: Holder Installation
Remove the adhesive tape from the holder. Slide it down the slot on the mounting base. Press all around against the wall to secure it in place.
Step 2: Handheld Showerhead Assembly
Attach the thick washer to the ON/OFF switch. Hand-tighten it onto the handheld showerhead. Screw the hose with the hose washer onto the ON/OFF switch. Do not use a wrench or pliers, tighten by hand.
Step 3: Hose Clamp and Faucet Connection
Mount the hose clamp on the wall to reduce noise. Place the hose through the hose clamp. Connect the hose to the faucet by screwing it onto the faucet connecter. Hand tighten only.
Cleaning Instructions
To maintain water pressure, periodically clean the water flow restrictor. Use a screwdriver or long-nose pliers to pull out the restrictor located inside the handle. Soak it in white vinegar for half an hour, then wash it before re- installing.
FAQ
- Q: What should I do if I encounter installation issues?
- A : If you have any problems with installation, please contact customer service at goolifee.xm@gmail.com before considering returning the product.
INSTALLATION INSTRUCTIONS
STEP 1. TO Mount Adjustable Bracket with Adhesive Disk on Wall Clean and dry surfaces, make sure air is free of steam and moisture. Remove the adhesive tape from the back of the mounting base, remember that the arrow marked ” UP ” faces up. Firmly press the mounting base against wall surface at desired location. Carefully align the edge of mounting base, sliding down the holder to match slot of mounting base until you hear a CLICK. Allow to dry at least 8 HOURS before showering or creating wet conditions.
STEP 2. Easy hand-tighten installation with ON/OFF SWITCH and HOSE. Make
sure the thick washer is positioned FLAT and STRAIGHT inside ON/OFF switch,
hand tighten it onto handheld showerhead.
Screw the hose with the hose washer in place onto the ON/OFF switch.
Tighten by hand, DO NOT use a wrench or pliers.
STEP 3. Reduce the noise of hose hitting wall Mount the hose clamp on the wall. Place hose through the hose clamp.
STEP 4. Connect the hose to the faucet Make sure hose washer is positioned FLAT and STRAIGHT inside hose nut. Screw hose with hose washer in place onto faucet connecter, HAND TIGHTEN ONLY.
WARNING
DO NOT leave the ON/OFF SWITCH set to pause mode after showering. BE SURE to CLOSE the faucet valve after showering.
CLEANING
As over time, debris and minerals accumulate in the built-in water flow restrictor, resulting in lower water pressure. Using a screwdriver point or long nose pliers, pull out the water flow restrictor located inside the handle, soak it in white vinegar for 1/2 hour, and wash.
If you have an installation problem, please don’t return this product before emailing us first.
- Customer service: goolifee.xm@gmail.com