APEC Water Systems TDS-EC Series Essence Top Tier Alkaline User Manual

APEC Water Systems TDS-EC Series Essence Top Tier Alkaline

Specifications

• TDS-MINI (Blue)
• TDS-NEW (White)
• EC-MINI (Blue)
• EC-NEW (White)
• Range: 0-1999PPM, 0-2999PPM, 0-1999 us/cm, 0-2999 us/cm

Product Information:
The TDS-EC Series is a set of digital meters designed to measure Total Dissolved Solids (TDS) and Electrical Conductivity (EC) in water samples. The meters come in different models with varying measurement ranges and features for accurate and reliable readings.

Operation Instructions

1. Prepare the water sample in a container such as a cup.
2. Remove the probe cap and press the button; the LCD will display 000.
3. Dip the probe into the sample. Note that the meter body is partially water-resistant and should remain dry.
4. Stir the meter and tap the cup for 2-3 seconds to eliminate bubbles near the probe, as they can affect accuracy.
5. Remove the meter from water to obtain the TDS reading, which will hold automatically.
6. To clear the reading for a new measurement, press the button to display 000 on the LCD.
7. After measurement, wipe the meter body and replace the cap. The meter will automatically shut off after 15 seconds from power on.
8. To manually turn off the meter, press the button for 3 seconds.

Install and Change Battery:

1. Replace the battery when the LCD becomes dim.
2. Remove the battery cover.
3. Install a new 3V CR2032 battery, ensuring the positive side faces up.
4. Close the battery cover and press the button to display 000 on the LCD.

Note:

• Accuracy:
  • +/- 2% < 300 PPM, < 450 us/cm
  • +/- 5% 300~800 PPM, 450~1200 us/cm
  • +/- 10% > 800 PPM, > 1200 us/cm
• Water Resistance: The meter is partially
  water-resistant; use and store carefully to avoid damage due to
  moisture.

FAQ

1. Q: How often should I calibrate the meter?
   A: It is recommended to recalibrate the meter every 6 months for accurate readings.

Instructions

1. User Manual of Product 1
   APEC Water Systems Ultimate RO-PERM Boosted Performance with Permeate Pump Ultra Safe Reverse Osmosis Drinking Water Filter System, for Low Pressure Homes

2. User Manual of Product 2
   APEC Water Systems PHPLUSKIT-14 US MADE 10″ Alkaline High Purity pH+ Calcium Carbonate Inline Filter Kit with 1/4″ Quick Connect

TDS-EC Series User Guide

[ Specification ]

1. One-button operation.
2. Auto reading hold function.
3. Auto shut off function.
4. Factory Calibrated: our meters are calibrated with a 200 PPM NaCl solution.
5. [TDS MINI and TDS-NEW] Automatic temperature compensation of 1 to 50 degrees Celsius (option)

[ Operation Instruction ]

1. Prepare the water sample in a container such as a cup.
2. Remove the probe cap, and press the button. The LCD will display “000”.
3. Dip the probe into the sample. The meter body is partially water-resistant only and shall stay dry.
4. Stir the meter and knock at cup for 2-3 seconds to remove the bubble near the probe. Because bubble affect the accuracy.
5. Remove the meter from water to obtain TDS reading. The reading will hold automatically.
6. For a new measurement, press the button to clear the reading. The LCD will display “000”.
7. After measurement, wipe the meter body then put the cap on. The measurement automatically shuts off after 15 seconds from power on.
8. To turn off the meter manually, press the button for 3 seconds.

[ Install and Change Battery ]

1. Change the battery when the LCD becomes dim.
2. Remove the battery cover.
3. Install a new 3V CR2032 battery, please make sure the battery is properly placed with the positive “+” side up.
4.  Close the battery cover, then press the button, the LCD shall display “000”.

[ Note]

1. Accuracy
   

2. The meter is partially water-resistant only. Please be careful during use and storage to avoid malfunction or damage due to moisture.

www.FreeDrinkingWater.com

TDS-EC Series User Guide

[ Specification ]

1. One button operation.
2. Auto reading hold function.
3. Auto shut off function.
4. Factory Calibrated: our meters are calibrated with a 200 PPM NaCl solution.
5. [TDS MINI and TDS-NEW] Automatic temperature compensation of 1 to 50 degrees Celsius (option)

[ Operation Instruction ]

1. Prepare the water sample in a container such as a cup.
2. Remove the probe cap, and press the button. The LCD will display “000”.
3. Dip the probe into the sample. The meter body is partially water-resistant only and shall stay dry.
4. Stir the meter and knock at cup for 2-3 seconds to remove the bubble near probe. Because bubble affect the accuracy.
5. Remove the meter from the water to obtain TDS reading. The reading will hold automatically.
6. For a new measurement, press button to clear the reading. The LCD will display “000”.
7. After measurement, wipe the meter body then put the cap on. The measurement automatically shut off after 15 seconds from power on.
8. To turn off the meter manually, press the button for 3 seconds.

[ Install and Change Battery ]

1. Change the battery when the LCD becomes dim.
2. Remove the battery cover.
3. Install a new 3V CR2032 battery, please make sure the battery is properly placed with the positive “+” side up.
4.  Close the battery cover, then press the button, and the LCD shall display “000”.

[ Note]

1. Accuracy
   

2. The meter is partially water-resistant only. Please be careful during use and storage to avoid malfunction or damage due to moisture.

www.FreeDrinkingWater.com

References

• APEC Water Systems - #1 US Manufacturer of Reverse Osmosis Drinking Water Filter Systems

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>