SIXTHGU V700 True Wireless Stereo Earbuds User Guide
- June 4, 2024
- SIXTHGU
Table of Contents
SIXTHGU V700 True Wireless Stereo Earbuds
Specification
- Support Blueto oth profile: A2DP, AVRCP, HFP HSP
- Transmission Distance: 10m
- Frequency Response: 20-20KHz
- Driver Unit: 10mm Titanium film speaker
- Impedance: 32Q
- Stand By Time: 70 hours
- Music Playback Time: 5 hours
- Earbuds Battery Capacity: 40mAh
- Charging Time Of Earbuds: 1.5 hours
- Battery Capacity of Charging Case: 350mAh
- Single Earbud Weight: 3.7g
Warning!
- Do not dismantle or refit the product to avoid malfunction or fire hazards.
- Keep away from corrosive liquids.
- Keep away from extreme ambient temperatures below-10 C or above 60″C.
- Keep away from children and pets.
- Do not touch the earbuds with sharp objects.
- Do not use the product in thunderstorm weather.
- If it has not been used for more than a month, please charge and maintain it in time to ensure that it is safe.
- Since the Bluetooth signal cannot be transmitted underwater, swimming. and diving will cause the signal disconnected or intermittent.
How To Pair
Auto Pairing
- Pick up two headsets from the charging case, and they will power on and pair to each other automatically within 10 seconds.
- Selecting the [V700] from device list in your Bluetooth manual to connect the earbuds.
Reset
If you accidentally get only one earbud work or fails to pair each other,
please reset it:
- Delete all [V700] Bluetooth records on the phone, then turn off the Bluetooth.
- Put two earbuds back to the charging case, then hold the charging case round button for 5 seconds untill the white lights on to reset will be done
- Turn on the Bluetooth to reconnect [V700
NOTE: In case there is [Connection Unsuccessful] in your devices, please delete all historical records of [V700] and try the pairing process again.
Left Earbud
- Power on: Pick up earbuds from the battery case to pair to each automatically
- Power off: Put earbuds into the battery case to power off automatically
- Play/Pause
- Previous
- Adjusting the volume
- Activating the voice assistant.
- Accept
- End
- Reject
- Game on /off
Right Earbud
- Power on: Pick up earbuds from battery case to pair to each automatically
- Power off: Put earbuds into battery case to power off automatically
- Play/Pause
- Next
- Adjusting the volume
- Activating the voice assistant. The voice assistance will be automatically activated depends.
- Accept
- End
- Reject
- Game on /off
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by the manufacturer could void your authority to operate this
equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RE Exposure Information
The device has been evaluated to meet the general RF exposure requirements.
The device can be used in portable exposure conditions without restriction.