LUCCECO 2W Solar Guardian Wall Lantern Instruction Manual

LUCCECO 2W Solar Guardian Wall Lantern

Product Specifications

• Product Name: Solar Guardian Wall Light 2W Wall Lantern with PIR
• Accessories: (x2) rawl plugs, (x2) screws
• IP Rating: IP44

Product Features & Benefits

• Equipped with a PIR sensor for motion detection
• Internal lithium battery for energy storage
• Automatically turns on at dusk when environmental brightness is less than 30lux
• Adjustable working modes for customized usage

Installation Instructions

1. Select a flat surface that receives direct sunlight.
2. Drill 2 holes of 6mm each, maintaining a distance of 78mm between them, at a height of 2-4m from the ground.
3. Insert the rawl plugs into the holes.
4. Secure the light in place by fixing the screws into the rawl plugs.
5. Straighten the bracket and fasten the upper screw tightly tosecure the lamp.
6. Switch on the light. It will illuminate briefly before entering normal operation mode.

Usage Instructions

1. The lamp will automatically light up when the ambient brightness is below 30lux.

2. Do not attempt to replace the internal lithium battery yourself or dispose of it in household waste or fire.

3. The battery’s capacity and lighting time depend on sunlight exposure and weather conditions.

4. If the LED lights appear dimmed over time, place the Solar Guardian back in direct sunlight for 6 hours to fully recharge the battery and restore illumination to full power.

FAQ

Q: How do I select different working modes on the Solar Guardian Wall Light?

A: Press the power button until you reach the desired mode.

SOLAR GUARDIAN WALL LIGHT 2W WALL LANTERN WITH PIR

NOTE – To comply with regulations, installation must be carried out by suitably qualified competent person and in accordance with the current IEE Wiring Regulations (BS7671) and Building Regulations. A copy of the instructions must be left for the user/maintenance engineer for future reference.

For non-UK, please refer/consult local requirements
ENSURE ELECTRICAL SUPPLY IS DISCONNECTED/ ISOLATED BEFORE COMMENCING INSTALLATION

ACCESSORIES

FEATURES & BENEFITS

• Front and rear facing LED technology provides both functional and ambient illumination
• 3 working modes, defined overleaf
• Long lasting battery life – 6 hours charge provides illumination up to 3 nights
• Perfect for outdoor entrance areas, balconies, paths and decorative garden lighting
• IP44 rated with durable impact resistant housing
• PIR detection range 2-6 metres
• No wiring, easy & simple installation

SUGGESTED METHOD OF INSTALLATION

1. Select flat surface which receives direct sunlight
2. Drill 2 holes of 6mm at the requested place, keep 78 mm distance between the 2 holes, 2-4m height from ground
3. Fix 2 rawl plugs into the hole (included)
4. Fix a screw to the lower expansion plug with a little spare space, insert into the screw groove and fix
5. Straighten the bracket and fasten the upper screw tightly and fit lamp
6. Switch On – fitting will turn on and LEDs will illuminate for a short period before turning off to normal operation

PRODUCT IDENTIFICATION

1. Solar Guardian Housing
2. 1,0 W Mono-Crystalline Silicon Solar Cell
3. PIR Sensor
4. Front LED Light
5. Rawl Plug (included)
6. Screw (included)
7. Screw Groove

NOTE

1. The lamp will light up when the environmental brightness is less than 30lux
2. The product is equipped with an internal lithium battery, please do not replace it by yourself, and don’t put it with household waste or in a fire
3. Full battery capacity and lighting time depends on sunlight duration and weather
4. If after a period of time the illumination from the LED lights looks dimmed, place Solar Guardian back in direct sunlight for 6 hours and the battery will fully charge returning illumination back to full power

PRODUCT SPECIFICATIONS

• Solar Panel: 1W, Monocrystalline Silicon
• Lithium Battery: 3.7V/1200mAh
• LED Qty: 18pcs SMD2835
• Rated Power: 2W
• Illumination Beam Angle: 120°
• PIR Sensor Detection Area: 120°/2-6m
• Induction Delay Time: 1 second
• Size: 159 x 152 x 123.5 mm

WORKING MODES
Select by pressing the power button until desired mode:

MODE A
Automatically turns ON at dusk (<30 lux) and remains 40lm off bright, up to 5 hours after which it turns OFF.

MODE B
Automatically turns ON to full brightness mode (200lm) when motion is detected within 6 metre range, and then returns to standby night glow mode (dimmed front and back light on) after 20 seconds of no motion.

MODE C
Automatically turns ON to full brightness mode (200lm) when motion is detected within 6 metre range and then returns to OFF after 30 seconds of no motion.

United Kingdom Warranty

• For other territories and for further information, please see www.luceco.com for details
• Products are protected by guarantee for a period of 1 year warranty, from date of purchase against defects in material and workmanship (unless otherwise stated). Should a product fail to perform as described within the warranty period it will be repaired or replaced with the same or equivalent product by Luceco, free of charge provided that you: (1) return the product to us with shipping charge prepaid, (2) provide us with proof of the original date of purchase and (3) quote our return authorization number.
• Repaired or replaced products will be returned to you with shipping charges prepaid. Replacement products may be refurbished or contain refurbished materials. If in our sole discretion, we are unable to repair or replace a defective product, we will refund the purchase price of the product.
• This warranty will not apply if in our judgment, the product fails due to damage in shipment, handling, storage, accident, abuse or misuse, or if it has been used in a manner not conforming to our product instructions, has been modified in any way, or has any serial number removed or defaced. Repair or attempted repair will void this warranty.
• Our maximum liability under the terms of this warranty is limited to the purchase price of the product covered by the warranty.
• The warranty is given under English Law. If any part of this warranty is deemed unenforceable (including any provision in which we exclude our liability to you) the enforceability of any other parts of the warranty will not be affected.
• These terms do not reduce your statutory rights.
• For Non-UK please contact Local Luceco Office for details. THESE TERMS AND CONDITIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
• Eventually, you may want to replace this fitting;
• Environmental Protection W.E.E.E (Wheelie Bin Symbol for EU ONLY)
• This symbol is known as the “crossed-out” wheelie Bin Symbol”. When this symbol is marked on a product or battery, It means that it should not be disposed of with your general household waste. Some chemicals contained within electrical/electronic products or batteries can be harmful to health and the environment. Only dispose of electrical/electronic/battery items in separate collection schemes, which cater for the recovery and recycling of materials contained within. Your co-operation is vital to ensure the success of these schemes and for the protection of the environment.

Tech Help Line
UK – 0330 0249 279
Non UK – +44 (0)1952 238 100 Supplied by LUCECO
Stafford Park 1
TF3 3BD ENGLAND
Visit our website at www.luceco.com

Kontakt
UK – 0330 0249 279
Non UK – +49 40 89066 878 – 29
Geliefert von Luceco
GmbH Holstenplatz 20b,
22765 Hamburg DEUTSCHLAND
Besuchen Sie uns auf www.luceco.de

Support Technique
UK – 0330 0249 279
Non UK – +33 (0)1 61 10 10 35 Notice fournie par
Luceco SAS France & Belux 3
Rue de Courtalin, Magny Le Hongre 77700 FRANCE & BELUX
Visitez note site Web www.luceco.fr

References

• Luceco | LED Lighting

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>