45MinST 8910TN 14 Inch Classic Victorian Platform Bed Frame Instruction Manual
- June 17, 2024
- 45MinST
Table of Contents
45MinST 8910TN 14 Inch Classic Victorian Platform Bed Frame
Specifications
- Product: [Product Name]
- Recommended Assembly: 2-Person
- Parts Included: Refer to Parts List
- Hardware Included: Refer to Hardware List
Product Usage Instructions
Important Safety Information
Before starting assembly, ensure you have read and understood all instructions
provided in the manual. Safety should be the top priority during construction.
Assembly Steps
- Check all parts and kits to ensure everything is included.
- Follow the steps in the manual carefully.
- Do not tighten screws until all parts are completely aligned and assembled.
Assembly of Head
Follow the assembly instructions for the head section using the specified
hardware and parts as indicated in the manual.
Assembly of Foot
Assemble the foot section according to the provided instructions, using the
specified hardware and parts.
Assembly of Sides and Middle Bar
Ensure correct placement of left and right sides as they are different. Use
the designated hardware and follow the instructions for assembly.
Assembly of Cross Bars and Slats
Follow the instructions to assemble the cross bars and slats using the
provided hardware.
Frequently Asked Questions (FAQ)
Q: Is it necessary to have two persons for assembly?
A: Yes, it is recommended to have two persons for safe and efficient
assembly.
Q: What should I do if any parts are missing?
A: Contact customer support for assistance in case of missing parts.
Q: Can I use power tools for assembly?
A: It is recommended to use manual tools to avoid overtightening or
damaging components.
For any question about our product, please contact us.
Warranty Policy
2-PERSON ASSEMBLY RECOMMENDED
The diagrams and instructions in this brochure are for illustration purposes
only and are not mean tto replace a licensed professional.An yconstructio nor
use of the product must be in accordance with all local zoning and/or building
codes.
The consumer assumes all risks and liability associated with the construction
or use of this product .The consume ror contracto rshould take all necessary
steps to ensure the safety of everyone involved in the project , including,bu
nt ot limited to, wearing the appropriate safety equipment
TIPS
- 2 PERSONS RECOMMENDED
- CHECK ALL THE PARTS + KITS & FOLLOW THE STEPS
- DO NOT TIGHTEN SCREWS UNTIL COMPLETELY ALIGNED AND ASSEMBLED
Parts Lists
Hardware Lists
Assembly of Head
Assembly of Foot
Assembly of Sides and Middle Bar
Assembly of Cross bars and Slats
Assembly of Check and Tighten
PLEASE CHECK AND TIGHTEN SCREWS WHEN ASSEMBLED
For any question about our product, please contact us,