CROSSBEATS CB-ATOM TWS Bluetooth Truly Wireless In Earbuds User Manual

CROSSBEATS CB-ATOM TWS Bluetooth Truly Wireless In Earbuds

Specifications

• Touch control
• Microphone
• Charging case LED
• Pressure relief hole
• Rechargeable touch pad
• Indicator light

Product Usage Instructions

First Time Pairing

1. Take out the earbuds from the charging case.
2. The earbuds will automatically power ON.
3. Search for “CB-ATOM” in your phone’s Bluetooth list.
4. Click to connect.

LED Indicator on Case
The LED indicator on the case provides visual feedback about the charging status of your earbuds. Make sure to refer to the manual for specific indications.

Reset

1. Ensure L&R earbuds are disconnected from all devices.
2. Take out the earbuds from the charging case.
3. Quickly tap on the earbuds five times until the white light flashes, indicating the reset is complete.
4. Place both earbuds inside the charging case and repeat the pairing process.

Controls
Refer to the manual for detailed controls on the earbuds, including tapping, touching and holding for various functions.

Charging Guidelines
Use only 10W adapters for charging your earbuds case to avoid charger faults and malfunctions. Avoid high-power mobile adapters beyond 10W as they can reduce the lifespan of your device.

FAQ

• What should I do if my earbuds do not pair correctly?
  Try resetting the earbuds by following the reset instructions provided in the user manual. Ensure they are disconnected from all devices before attempting to pair again.

• Can I use any power adapter to charge the earbuds case?
  It is recommended to use a 10W adapter to charge the earbuds case. Using higher power adapters may lead to malfunctions and reduce the lifespan of your device and chargers.

OVERVIEW

1. Touch control
2. Microphone
3. Charging case LED
4. Pressure relief hole
5. Rechargeable touch pad
6. Indicator light

POWER ON

Take out the earbuds from the charging case, it will automatically power On.

POWER OFF

Place the earbuds back in the charging case, the earbuds will power off automatically.

FIRST TIME PAIRING

1. Take out the earbuds from the charging case

2. The earbuds will auto power ON

3. Search for ‘CB-ATOM’ in your phone’s BT list

4. Click to connect

MONO PAIRING

1. For mono mode, take out either of the earbuds when already paired

2. The music will automatically play in that particular earbud

LED INDICATOR ON CASE

• While charging – White light keep blinkingbased on the charge level
• Low Battery (less than 10%) – The first light will be on for 3 secs
• Battery full – All 4 lights will be on
• Current charge level – Press on the button present at the bottom of the case, to check the battery level of the case.

CHARGING

Connect and use the Type-C cable provided in the box for charging Full charge in less than 1.5 hours

RESET

1. Ensure L&R earbuds are disconnected from all the devices, (turn off the Bluetooth option on the device which was connected before)
2. Take out the earbuds from the charging case
3. Quickly tap on the earbuds for 5 times, and the white light flashes, indicating that the reset is complete
4. Place both earbuds inside the charging case & repeat the pairing process

CONTROLS

CHARGING GUIDELINES

• Use only 10W adapters for charging your earbuds Case.
• Caution against using high-power mobile adapters (beyond 10W), as this may lead to charger faults.
• Using adapters with higher power ratings can result in malfunctions and reduce the lifespan of device and your chargers.
• Users can contact customer support for any further assistance or clarification on concerns related to charging and power adapters.

ABOUT COMPANY

• +91 96112 93293
• +91 96112 93293
• [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>