ASGOFT ASE-1000 WiFi Smart Plug User Manual

ASGOFT ASE-1000 WiFi Smart Plug

Specifications

• Product Model: ASE-1000

• Capacity: 1024 Wh

• Dimensions (LWH): 12.998.277.68(in)/ 330210195(mm)

• Weight: 20.94lbs/9.5Kg

• Battery Type: LiFePO4

• Cycle Life: 6000 cycles, remaining capacity 70%

• Maximum Input Power: 1200W

• Maximum Output Power: 800W

• Input Voltage Range: 18-55V

• Maximum Input Current: 15A

• Output Voltage Range: 20-50V

• Maximum Number of Batteries that can be Connected in
  Parallel: 5

• Maximum Expandable Capacity: 5120Wh

• Protection Level: IP67

• Charging Temperature: 0-45°C

• Discharging Temperature: -10-45°C

Product Usage Instructions

Safety Guidelines

1. Store the product in a cool, dry place away from heat sources.
2. Avoid contact with liquids, do not immerse in water or use in rainy/humid environments.
3. Avoid using the product near flammable or explosive substances.
4. Operate in accordance with regulations in potentially explosive environments.

Cleaning and Maintenance

12. Clean product interface with a dry cloth if dirty.
13. Handle the product carefully to prevent damage from tilting.
14. If severely damaged, power off, keep battery away from flammable materials, and dispose of properly.

Additional Safety Tips

14. Store the product out of reach of children and pets.
15. Use a moisture-proof bag in humid environments to prevent water immersion.
16. If water is detected inside, do not power on, take precautions against electric shock, and contact customer service.

Product Limitations

16. Not recommended for medical emergency equipment; consult manufacturer for usage restrictions.

FAQ

Q: Can the product be used with medical emergency equipment?

A: This product is not recommended for medical emergency equipment related to personal safety. Consult the manufacturer for usage restrictions.

Q: How should I clean the product interface?

A: Use a dry cloth to clean any dirt on the product interface.

Q: What should I do if water is found inside the product?

A: Do not power it on or use it. Place it in a safe, waterproof area and contact Asgoft customer service for assistance.

Disclaimer

To protect the legitimate rights and interests of users, please carefully read the user manual of this product before use, to ensure correct usage after full understanding. After reading, please keep the user manual properly for future reference. If this product is not used correctly, you may cause serious injury to yourself or others, or damage to the product and property loss. Once you start using this product, it is deemed that you have read, understood, recognized, and accepted all the terms and content of the product instructions, disclaimer, and safety instructions. The user undertakes to be responsible for their own actions and all consequences arising therefrom. Asgoft is not responsible for any losses caused by users not using the product in accordance with the usermanual. In the event of force majeure such as lightning, earthquake, flood, etc., causing damage to the product or property loss, or if the use of the Balcony Photovoltaic Storage System is not compliant due to local policies, all consequences shall be borne by the user, and Asgoft is not responsible for any losses caused thereby. In compliance with laws and regulations, the company reserves the final right to interpret all related documents of this document and this product. In case of updates, revisions, or terminations, no further notice will be given. Please visit the official website of Asgoft to obtain the latest product information. http://www.pairbest.com

Safety Guidelines

1. Store the product in a cool, dry place and strictly avoid using it near a heat source.
2. It is strictly prohibited to allow the product to come into contact with any liquids. Do not immerse it in water or get it wet. Avoid using the product in rainy or humid environments.
3. Do not use the product in environments with flammable or explosive substances, such as gasoline, gas, or highly corrosive chemicals. Failure to comply may pose a safety risk.
   • Always operate in accordance with regulations, instructions, and signs in environments where explosions may occur.
   • Do not store flammable liquids, gases, or explosives in the box containing this product.
4. Using the product in environments with strong static electricity or strong magnetic fields is prohibited.
5. Disassembling the product or piercing it with sharp objects in any way is strictly prohibited.
6. Do not use wires or other metallic objects for unauthorized connections to prevent short circuits.
7. Please do not use unofficially provided parts or accessories. For replacements, please inquire about relevant purchase information from Asgoft’s official sales channels.
8. When using the product, strictly follow the recommended operating temperature range in this user manual. High temperatures may lead to battery ignition or even explosion; low temperatures can significantly reduce product performance or even cause it to stop working.
9. Prohibit stacking other heavy objects on top of this product.
10. Avoid impacts, drops, and severe vibrations. In the event of severe external force impact, immediately power off and place the battery in an open area away from flammable materials or crowds. Dispose of it properly in accordance with local legal regulations.
11. If the product accidentally falls into water during use, place it in a safe open area. Do not approach the product before it is completely dry. Do not use a dried product that has been in contact with water again. Dispose of it properly following the instructions in the “Disposal” section below. If the product catches fire, use the recommended fire-fighting equipment in the following order: water or water mist, sand, fire blanket, dry powder, and CO2 fire extinguisher.
12. If there is dirt on the product interface, use a dry cloth to clean it.
13. Please handle the product with care to prevent it from tilting and causing damage. If the product is severely damaged after tilting, immediately power off, place the battery in a spacious area away from flammable materials or crowds, and dispose of it properly in accordance with local legal regulations.
14. Store the product in a place inaccessible to children and pets to avoid potential safety hazards from accidental triggering.
15. In humid environments, it is recommended to use a moisture-proof bag to prevent immersion in water. If water is found inside the product, do not power it on or use it. Take precautions against electric shock before touching the product. Immediately place it in a safe, waterproof open area and contact Asgoft customer service for assistance.
16. This product is not recommended for powering medical emergency equipment related to personal safety, including but not limited to hospital-grade CPAP (Continuous Positive Airway Pressure) machines and ECMO (Extracorporeal Membrane Oxygenation). However, home-version CPAP machines for household use can be used normally and generally do not require continuous professional monitoring. Follow medical advice and consult the manufacturer of the respective equipment for usage restrictions.
17. Power products inevitably generate electromagnetic fields during use, which may affect the normal operation of implanted medical devices or personal medical equipment such as pacemakers, cochlear implants, hearing aids, and defibrillators. If you use these medical devices, consult the manufacturer for usage restrictions to ensure a sufficient safe distance between this product and the implanted medical device (e.g., pacemaker, cochlear implant, hearing aid, defibrillator) while it is operating.

Disposal

1. If conditions permit, discharge the battery of this product completely. Then, place the product in the designated battery recycling bin. This product contains a battery, which is a hazardous chemical. It is strictly prohibited to dispose of it in regular garbage bins. For further details, please follow local laws and regulations regarding battery recycling and disposal.
2. If the battery cannot be completely discharged due to a malfunction of this product itself, do not dispose of the battery directly in the battery recycling bin. Please contact a professional battery recycling company for further handling

Asgoft App Download

You can connect to this product through the Asgoft app to view information, control the device, and make personalized settings.

App Operation Instructions, please log in to the Asgofte official website to download. http://www.pairbest.com

Intelligent Lithium Battery Pack

Specifications

Basic Parameters

Mainframe

| Product Model| ASE-1000|
Capacity| 1024 Wh|
Dimensions (LWH)| 12.998.277.68(in)/

330210195(mm)

| Single Module
Weight| 20.94lbs/9.5Kg|
Battery Type| LiFePO4|
Cycle Life| 6000 cycles, remaining capacity ≥ 70%|
Maximum Input Power| 1200W| 600W*2
Maximum Output Power| 800W| Compliant with EU Standards
Input Voltage Range| 18-55V|
Maximum Input Current| 15A| Single Channel
Output Voltage Range| 20-50V|
Maximum Number of Batteries that can be Connected in Parallel| 5|
Maximum Expandable Capacity| 5120Wh|
Protection Level| IP67|
Charging Temperature| 0-45℃|
Discharging Temperature| -10-45℃|
Protection| Overcharge, Overdischarge, Overcurrent, High Temperature, Low Temperature, Short|

Support

|

Others

| WiFi Module| Support|
Balancing Mode| Support|
Communication| CAN|

Working Conditions

Package List

List Inside the Box

• Note: Cables Packed in Separate Small Boxes.
• Note: The quantity of cables depends on the system configuration.

Important Notes

1. Please check if your area allows the installation of the Balcony Photovoltaic Storage System. You need to obtain official permission from the local government before installation.
2. Before installation, please check the accessories. Some accessories may need to be purchased separately.
3. Before installing or removing the Intelligent Lithium Battery Pack, make sure the device is in the off state and disconnect the photovoltaic panel and microinverter.
4. After installation, you need to download the Asgoft application and synchronize it with the device.

Product Display

• Power On: Press and hold the power button for about 3 seconds. The indicator light will flash rapidly, indicating that the device is in the power-on self-checking state. When the indicator light stays solid blue, the self-check is complete, and the device is powered on.
• Power Off: Press and hold the main power button for about 5 seconds. The indicator light will go off, indicating that the output function is turned off, and the device is powered off.
• WiFi: Press and hold the WiFi button for 3 seconds. The button indicator light will flash blue, entering the network pairing mode. When the blue indicator light goes off, it enters the internet dialing mode. Once successfully connected to the network, the indicator light will stay solid blue. When the WiFi indicator light blinks slowly, it indicates a disconnection. In the case of multiple modules in parallel, only one module needs to be connected to the network. The other modules will automatically form a network through communication, without the need for each module to be paired.

Split Inverter

Specifications

Package List

Product Display

• Power On/Off: Press the power button to turn on the device. The button indicator will stay green. Press the button again to turn off the device. The indicator will go off.

Smart plug

Specifications

Product Showcase

Operating Mode 1 – Balcony Photovoltaic Storage System

System Configuration

Product Installation

You can stack and parallel connect multiple modules to expand the capacity. Up to 5 modules can be connected in parallel. The modules are connected with hard links, no additional cables are needed. Refer to the diagram for details :

Friendly Reminder:

1. Before stacking the devices, make sure the intelligent lithium battery pack is turned off.
2. After stacking the devices, connect the photovoltaic panel, and then connect to the WiFi network.
3. When the photovoltaic panel is generating power, the device will automatically power on without the need to press the power button.
4. Do not touch the metal contacts of the connector with your hand or any other object. If necessary, gently clean them with a dry cloth

System Combination Display

Note: When disassembling the system, turn off the intelligent lithium battery pack switch, disconnect the photovoltaic panel, disconnect the micro- inverter and disassemble and move one module at a time

Instructions for Use

Charging

In the Balcony Photovoltaic Storage System, once the photovoltaic equipment is connected, the intelligent lithium battery pack will automatically turn on and off. At this point, the intelligent lithium battery pack can be charged using the solar panel.

1. You can charge this product using solar energy, supporting a maximum of 1200W solar charging.
2. Before connecting the solar panel, please confirm that the output open-circuit voltage specification of the solar panel is within 55V. For detailed system connections, please refer to the instructions above.

Discharging

Manual Mode

Set the power setting mode to manual mode through the APP, and then set the power level in the device power setting column. As shown in the following figure

Note: Specific values may vary depending on the operating status of the device.

Automatic Mode

Automatic mode configuration for smart plug use. The commonly used load end is configured with smart plugs, smart plugs and Intelligent lithium Battery Packs are configured with LAN, and the output power is accurately controlled according to the information of the smart plug to achieve automatic mode. As shown in the following figure:

Operation Mode 2 – Portable Power Station

System Configuration

Figure： Portable power station system configuration diagram

Product Combination Display

Image: Product Combination Display (Split-type Inverter + Intelligent Lithium Battery Pack)

Instructions for Use

1. Turn off the switches of the Intelligent Lithium Battery Pack and the Split Inverter. Ensure that the Split Inverter is not connected to the photovoltaic panel. Then, follow the product demonstration to connect the Intelligent Lithium Battery Pack and the Split Inverter.
2. Turn on the switches of the Intelligent Lithium Battery Pack and the Split Inverter. Activate the WiFi connection. For detailed steps on how to connect to the network, please refer to the APP User Manual
3. The product can be charged by connecting the photovoltaic panel to the Intelligent Lithium Battery Pack through the solar charging port on the Split Inverter. It is important to note that you must first connect the Intelligent Lithium Battery Pack and the Split Inverter, ensuring they are both powered off, before connecting the photovoltaic panel.
4. When replacing the Intelligent Lithium Battery Pack, first turn off the switches of the Intelligent Lithium Battery Pack and the Split Inverter, disconnect the photovoltaic panel, and then proceed with the battery replacement

Battery Replacement Mode

Each Split Inverter is connected to one Intelligent Lithium Battery Pack module. When the Intelligent Lithium Battery Pack runs out of power, you can replace it after turning off the power to continue using it.

Stacking Mode

For long-term usage of heavy loads, it is recommended to utilize a high- capacity stacked portable energy storage system. This involves combining one inverter with 2-3 intelligent lithium battery packs stacked together. This configuration ensures uninterrupted power supply without the need for frequent battery replacements

Combination of Split Inverter and Multiple Intelligent Lithium Battery Packs

Frequently Asked Questions

1. How many solar panels can be connected to each intelligent lithium battery pack?
   • Each intelligent lithium battery pack can be connected to a maximum of 2 solar panels, each with a maximum output of 600W. When multiple intelligent lithium battery packs are used in parallel, the host (topmost battery pack) is connected to the solar panels.
2. How should the intelligent lithium battery pack be cleaned?
   • If the unit is placed outdoors on a balcony, it will be exposed to wind and sunlight daily. Therefore, we recommend performing regular light cleaning. Use a dry, non-abrasive cloth for wiping. If a deeper clean is desired, you may consider using a specialized screen cleaning solution for phones or computers. However, ensure that no excessive liquid enters the device or terminal, as this may cause internal circuit damage or affect terminal conductivity, potentially compromising user safety.
3. What are the safety precautions for using this device?
   • When using the intelligent lithium battery pack, please pay attention to the temperature range of the operating environment. The ASE-1000 will perform optimally within its specified temperature range. Operating the device outside of this range may significantly reduce its performance and potentially shorten its lifespan.
4. How is the safety performance of this device?
   • The ASE-1000 is certified to meet all necessary safety standards and can be used both indoors and outdoors.
5. In what temperature range is this device suitable for use?
   • It is recommended to use the device within the range of 0°C to 45°C. Operating outside of this temperature range may affect the efficiency of charging and discharging. In temperatures below freezing, the device can only be discharged and not charged.

Maintenance and Care

1. Please store the product away from water sources and heat sources.
2. For an extended battery lifespan, it is best to use or store this product in an environment with a temperature range of 20°C to 30°C.
3. For long-term storage, please charge and discharge the product once every 3 months (first discharge to 0%, then charge to full, and discharge to 80% for long-term storage). Products that have not undergone charging and discharging for more than 6 months will not be covered by the warranty.
4. For safety reasons, please do not store this product in environments exceeding 45°C or below -10°C for extended periods.
5. If the product’s battery level is critically low and it has been idle for an extended period, it must be charged before it can be used again

Customer Support

You can contact us and get more product information through the following channels:

• czp@pairbest.com
• www.pairbest.com

After receiving the product, please fill out the warranty card information and send it to our after-sales email to activate your warranty service.

• www.plentisolar.de

References

• ASGOFT-Storage battery device manufacturer
• ASGOFT-Storage battery device manufacturer
• Balkonkraftwerke Photovoltaik Anlagen Zubehör | PlentiSolar

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>