VetOvation IntelliScope WiFi HD Camera System User Guide

**VetOvation IntelliScope WiFi HD Camera System User Guide

**

IntelliScope WiFi HD Camera System User Guide For smart phone or tablet

(Apple or Google)

Please call (919)247-0328 for assistance

1. Download the EndoVision App onto your phone or tablet

DOWNLOAD EndoVision

DOWNLOAD EndoVision

2. Connect the scope and light source to the WiFi HD camera handpiece

   • Press the two tabs at the top of the camera coupler together (a)
   • Insert the scope eyepiece into the coupler and release the tabs. The scope should now be seated securely in the coupler (b)
   • Screw the portable LED light source onto the light post (c)
     

3. Turn on the IntelliScope System

   • Turn on WiFi HD camera by depressing On/Off button (above the AWB button) for 3 seconds (d)
   • Turn on portable LED light source (e) and verify it is on at scope tip
   • Start EndoVison app on smart phone or tablet
   • Confirm wireless connection with ENDOVISION_F6C2EC
   • If needed, enter Password: endovision 88

4. Scope Setup & Use

   • White balance the camera by pointing the tip of the scope at a white paper or gauze then press & hold the AWB button (below camera On/Off button) for approximately 3 seconds. The screen will confirm when white balance parameters are set
   • Focus scope in closed hand using black dial behind the coupler (f)
   • Warm the scope in closed hand or warm water to prevent lens from fogging
   • Watch screen as the scope is advanced into an ear to avoid collecting wax or debris on lens

5. Utilizing the App

   • The app will orient the phone/tablet screen horizontally

   • App Symbols (on left) include:
     

   • To show/hide your icons and symbols, tap the screen at any time

   • To close the app, swipe up on the lower white bar

6. Capturing Images & Video

   • To capture still images:
   • Visualize target image on viewing screen and press & release the handle trigger (g) and the screen will display “Snap Successful”.
   • To capture videos:
   • Visualize target then press & hold the trigger (g) for 2 seconds and the screen will display “Start Local Recording”. Note: Video camera icon turns red and flashes when recording.
   • To end video press & hold trigger button again and the screen will display “Finish Local Recording”. Note: Video camera icon returns to normal.
   • Still images may be captured while recording video by quickly depressing and releasing the trigger. The device screen will confirm image capture.
   • Still images and videos can also be initiated using the app if the device screen is touch activated. To capture a still of video simply tap the icons on the left of screen.

Thank you for purchasing the IntelliScope System by VetOvation
Please call (919)247-0328 for assistance if needed.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>