NOVA LIFE Andy Takskinne Ceiling Lamp Instruction Manual
- June 4, 2024
- NOVA LIFE
Table of Contents
NOVA LIFE Andy Takskinne Ceiling Lamp Instruction Manual
CAUTION
NO:
Warning:
- Only use bulbs as directed on the label on the lamp.
- urn off the lamp before replacing the bulb and wait until the bulb has cooled. Take special care to touch the lamp when the lamp is lit. It can be hot.
Pre-Installation
PLANNING THE INSTALLATION
Read all instructions before assembly and installation. Before starting
installation of the fixture or removal of a previous fixture, disconnect the
power by turning off the circuit breaker or by removing the fuse at the fuse
box. To avoid damaging this product, assemble it on a soft, non-abrasive
surface such as carpet or cardboard.
TOOLS REQUIRED
-
Cross Screwdriver
-
Flathead Screwdriver
-
Knife
-
Wire Cutter
-
Percussion drill
-
Chopping bit Dia 6 mm
-
Ladder
-
Safety Goggles
Installation
(Make sure to turn off the main power)
Step 1.
Step 2.
Step 3.
Step 4.
Operation
- Turn on power at the circuit breaker or fuse box.
- Turn the light switch on to activate the fixture.
Package Content (parts are not scale)
| Part | Description | Quantity |
|---|---|---|
| A | Light fixture | 1 |
| B | Wall expansion particle | 2 |
| C | Self-Tapping screw | 2 |
Light source
230V GU10 4 x 25W Max (not include)
Recommend LED bulb
Care and Cleaning
EXTERIOR MAINTENANCE
- To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture.
- Do not use any cleaners with chemicals, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>