YLXDD220-S18W Ceiling Light with Motion Sensor User Manual

LED Ceiling Light USER MANUAL

Parameters

Model| Input Voltage(V)| Power (W)| Lumen (Lm)| CCT(K)| Produce Size DH(mm)| Waterproof Level
---|---|---|---|---|---|---
YLXDD220-S18W| AC110-120| 18| 1600| 3000K/4000K/6000K| (1)220H28| IP20

Product specification

Packing List

for
Ceiling Light
2| User Manual| 1| pcs
3| Screws,wall plug| 4×4| pcs
4| PE Sack| 1| pcs

Installation Guide

1. Align the holes of the hanging plate with the screw holes and mark the holes with a pencil.
2. Drill holes n the ceiling with an impact drill at the marked ocations.
3. Install the wall plug into the hole of the ceiling.
4. Fix the ceiling plate on the ceiling with screws.
5. Connect the power input ines L and N on the lamp to the mains. Please turn off the power switch before wiring.
6. The Iamp corresponds to the mounting bracket clamping position, and then rotate the amp n the counterclockwise direction, when the sound of the buckle is heard, the installation s complete.
7. Complete the installation. Just turn on the power and use it.

Human body infrared nduction nstruction manual

1. Dial code function switch (a total of 3 gears): from top to bottom:
   1st gear: Constant light mode;
   2nd gear: off mode;
   3rd gear: induction mode;

2. Dial code delay switch (a total of 3 gears): from top to bottom:
   1st gear: 30S+5S,
   2nd gear: 120S+5S,
   3rd gear: 180S+5S;

3. Human body induction module
   3.1 Ceiling installation (hanging height 2.5m): InductionRadius: >3.5m, Detection Angle 120°,as shown in Figure 1.
   3.2 Wall-mounted horizontal installation (single test): Radius sensing distance: 4-6m, Detection Angle 120°,as shown in Figure 2.
   3.3 In the induction mode of the function switch, in a dark environment, if people pass by, the induction mode will be activated.

Color mixing user manual

Color matching and code removal

1. Remove the code and adjust the left side to 3000K
2. Remove the code and adjust the middle to 4000K
3. Remove the code and adjust the right side to 6000K

Warning

• When the input voltage exceeds the standard range, it may cause fixedlight failure. Please be sure to use it under right input voltage.
• The fixedlight used in high temperature will reduce its lifespan; consult more details with local distributor.
• When installing this fxedlight on traditional fluorescent lighting fixture, it’s necessary to change the circuitry. Please contact local professional electrician to operate it.
• Make sure you cut off power before you start the installation procedure.

Attention

• Turn off the power before installation.
• Do not use with dimmers or completely sealed lamps.
• Keep away from corrosive substances. Please use a dry cloth when cleaning.
• Since the fixed lamp is installed at a high place, please pay attention to personal safety when cleaning and installing.
• When the external flexible cable or cord of the lamp is damaged, it should be replaced exclusively by the manufacturer or its service agent or similar qualified personnel to avoid danger.
• The product must be installed by professionals.

Correct Disposal of this product
This marking indicates that this product should not be disposed with other household wastes throughout the EU. With an aim of preventing unnecessary harm to the environment or human health from uncontrolled waste disposal, the product should be recycled responsibly to promote sustainable use of material resources.

THANK YOU

Thank you for purchasing ceiling Light Fixture. For the product’s optimum performance and safe use, please read this user manual carefully and keep it for future reference. Should you ever experience any issues with your new product, please feel free to contact our helpful customer service team by e-mail or send us a buyer-seller message.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>