YIONON GC10D Wireless Gaming Controller User Manual
- June 17, 2024
- YIONON
Table of Contents
- Compatibility
- Connection Ways
- Supported Platforms:
- Supported Games:
- Pairing Brief
- Product Overview
- LED Overview
- Phone Clip Using(sell separately)
- Connecting to N-Switch
- Connecting to Android/Apple/PC (Requires built-in Bluetooth)
- Connecting to Android TV/PC with 2.4G Dongle(sell separately)
- Connecting to PC with Wired Connection
- ABXY Button Instruction
- Back Buttons Function
- Turbo Function
- D-pad and Left Joystick Function Switching
- RGB Light
- Mobile APP Function
- Turn Off/Sleeping Function
- Charging Function
- Reset Function
- Product Specifications
- Attention
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Wireless Gaming Controller
User manual
(GC10D)
Discover your true gaming power
Compatibility
- N-Switch/Lite/OLED
- Apple: iPhone, iPad, Macbook, Apple TV, (iOS/iPadOS 13.4 and above)
- Android: phone, tablet, TV, TV box, (Android 8 and above)
- PC: Windows 7/8/10/11, steam OS
Connection Ways
Wired, Bluetooth, 2.4G Dongle
Supported Platforms:
Such as, Xbox Game Pass, Steam, Amazon Luna, Apple (Arcade/ MFi )
Game, John emulator, Steam Link, Epic, etc.
Supported Games:
Such as, Minecraft, Call of Duty, Apex Legends, Diablo Immortal, Asphalt, Sky: Children of Light, Genshin Impact (Android not supported), NBA 2K, Battle Prime, Fortnite, Tower of Fantasy, Ark, Pokemon Unite, Dead Cells, Warframe, Need for Speed: Most Wanted, Grand Theft Auto, Rocket League Sideswipe, BombSquad, etc.
Pairing Brief
Controller Mode| Platform| Connection Method| LED/RGB
Indicator| Reconnection
---|---|---|---|---
NS mode| N-Switch| Press and hold the NS button for as| LED1 and red RGB
remain on| Press the NS button for 1s
BT mode| Android phone/ tablet/TV box iPhone/Ipad/ Mac book/ Apple TV
Chromebook Laptop
Fire TV
Fire Tablet Steam deck| Press and hold the BT button for 3s| LED2 and purple
RGB remain on| Press the BT button for 1s
2.4G mode| Windows PC Android TV Fire TV| Press and hold the 2.4G button for
3s| LED3 and RGB remain on| Press the 2.4G button for 1s
Product Overview
LED Overview
Connection Mode Indicator | Explanation |
---|---|
Flashing slow | Turn on/Re-connection |
Flashing fast | Pairing |
Alwavs on | Connected |
Phone Clip Using(sell separately)
Note: Accessories may not be included and depend upon your seller.
Connecting to N-Switch
Wireless Connection
Step 1: Click Controller Change Grip/Order on the Switch homepage.
Step 2: Long press NS button for 3s until LED1 and the red RGB change from
flash slow to flash quickly, entering pairing.
Step 3: LED1 and red RGB remain ON, and the connection is successful.
Wired Connection
Wake-up and Re-connect: Press the NS button for 1s to power on the controller, will wake up and reconnect the N-Switch device you used last time.
Connecting to Android/Apple/PC (Requires built-in Bluetooth)
Support Platforms:
Apple: iPhone, iPad, Macbook, Apple TV
Android: Android phone, table, Android TV, TV box
PC: Windows, steam OS
Others: Fire TV, Fire tablet, Chromebook, Steam deck
With Bluetooth Connection
Step 1: Long press BT button for 3s until, The LED2 and purple RGB flashes
fast, entering pairing.
Step 2: Turn on your device Bluetooth, locate “Xbox wireless controller” and
pair it.
Step 3: LED2 and purple RGB remain ON, and the connection is successful.
Re-connection: Press the BT button for 1s to power on the controller, then it will reconnect to the device you used last time.
Connecting to Android TV/PC with 2.4G Dongle(sell separately)
Note: Accessories may not be included and depend upon your seller.
Support Platforms: Android TV/TV box, PC Windows, Fire TV, etc.
2.4G Dongle Connection Method
Step 1: Long press 2.4G button for 3s until, The LED Indicator and RGB flashes
fast, entering pairing.
Step 2: I Insert the 2.4G dongle into the USB port of the device. The red LED
on the dongle blinks.
Step 3:Press the pairing button on the dongle for 1s, the LED on the dongle
turns red and blinks rapidly, indicating that the dongle is ON entering
pairing.
Step 4: Blue RGB on the dongle, LED Indicator and RGB on the
controller
Mode | Xinput | Dinput | Switch Pro |
---|---|---|---|
Device name | Xbox360 controller for Windows | GC1OD Controller | Pro Controller |
Indicator State | |||
RGB State | Cyan | Green | Red |
Mode Change
The 2.4G dongle has 3 modes, which can be changed manually.
Mode change method: After the controller is successfully connected to the 2.4G
dongle, press and hold the controller “-” and “+” buttons at the same lime for
3s to change the mode.
Connecting to PC with Wired Connection
Step 1: Use USB cable to connect the gamepad and the USB port in PC.
Step 2: The PC will prompt new hardware and install automatically.
Step 3: LED3 and cyan RGB on the gamepad remain ON, and the connection is
successful. It is in X-input mode.
Testing Function:
Function testing is available when used on the computer. The specific steps
are shown below: Open Control Panel -» Devices and Printers -» Xbox Wireless
Controller,
Right click Controller icon →Game Controller Setting → click Properties→
Testing.
ABXY Button Instruction
Switch Layout Button
When connecting the controller with the Switch, the buttons shown on the LE
are the ABXY function buttons.
PC/Phones layout Button
When connecting the controller with phones or PC, the buttons on the outside
are the ABXY function buttons.
Back Buttons Function
NUNR/MUMR Default Function:
NL Button = Gyro Motion Function
This function supports Apple, Android, and PC, N-Switch does not need to use
this function.
- Press and hold the NL button to turn on the gyro motion function.
- Then move the controller for gyro motion control.
- Unhold the NL button to turn off the gyro motion function.
Note 1: This feature is still in beta. If you don’t like it, you can change it
yourself according to the
Macro Function customization method below.
Note 2: If the gyroscope is off-center, please follow these steps to calibrate
it:
- Turn off the controller and place it on a horizontal table;
- Press and hold the “B”,”-” and “BT” buttons 1s. The indicator lights LED1, 2, and LED3, 4 will flash alternately, indicating the controller gyroscope enters the calibration state;
- Press the + button 1s to complete the gyroscope calibration;
NR Button = Right Joystick Speed-down Function
- Press and hold the NR button to reduce the right joystick’s movement speed.
- Then move the right joystick for precise aiming.
- Unhold the NR button to get the right joystick’s normal movement speed.
Macro Function
Programming Buttons: NL, NR, ML, MR.
Action Button: A, B, X, Y, LB, RB, LT, RT, Left Joystick( press down), Right
Joystick( press down), D-pad, -, + buttons.
1-20 buttons and 1-60 seconds can be recorded and saved.
Macro Function Setting:
-
Press and hold one of the programmable buttons (NUNR/MUMR), and then press the Fn button for 1s. The controller vibrates and the orange RGB flashes, signaling the controller is in programming mode.
-
Press the action buttons you want to be programmed. Action Button: A, B, X, Y, LLB, R/RB, ZLLT, zR/RT, Left Joystick( Press Down), Right Joystick( IPress Down), D-pad, -/+ buttons.
-
Press again the programmable button (NUNR/MUMR) when complete.
The controller vibrates and the RGB light returns to the state before programming, signaling the programming is successful. -
Press the NL/NR/ML/MR button to release the programmable function.
Note: Programmed buttons will remain in memory even after being disconnected.
Clear Macro Function:
- Press one of the programmable buttons (NUNR/ML/MR), and then press Fn button for 1s. The controller vibrates and the orange RGB flashes, signaling thcontroller is in programming mode.
- Press again the programmable button (NL/NR/ML/MR) to clear the Macro function.
Turn ON/Off The Back Button Function
Long press the Fn button for 5s to turn on/off the back button(NL,NR,ML,MR) functions.
Turbo Function
Buttons can be set Turbo Function: A, B, X, Y, LB, LT, RB, RT, NL, NR,ML,MR.
Manual Turbo
Turn on: Press and hold the function button, and press the TURBO button once,
the manual TURBO function will be launched.
Turn off: Repeat the last operation.
Auto Turbo
Turn on: Press and hold the function button, and press the TURBO button twice,
the auto TURBO function will be launched.
Turn off: Repeat the last operation.
D-pad and Left Joystick Function Switching
- Press down and hold the left joystick, and press the Fn button. The D-pad and left joystick will interchange roles internally.
- Restore to default: press down and hold the left joystick, and press the Fn button.
RGB Light
Breathing Mode: Press the Fn button twice.
RGB light off: In breathing mode, press the Fn button twice in a row again to
turn off the RGB light;
Change Color: Press and hold Fn button, and press “” or “+” button.
‘RGB lights have 8 color adjustable settings – red, purple, cyan, green,
orange, blue, pink, and white.
Mobile APP Function
Download for iOS: Search (Keylinkerl on App Store.
Download for Android: Search (Keylinkerl on Google Play.
How to use the APP:
- Power on the controller or connect the controller to your device.
- Turn on the Bluetooth on your mobile phone.
- Start the (Keylinkerl APP, it will automatically search for the nearby controller devices.
- Click on the “Controller ID Code” found in the search to connect and use the app.
APP Function Introduction:
- Buttons Function Switching
- Joysticks Curves Adjustment
- Triggers Curves Adjustment
- Turbo Function settings
- Vibration Adjustment Function
- Gyro Calibration
- Buttons Testing Function
- Reset
- More functions are under development
Update Firmware
After connecting the APP, click on the upper right corner of the APP interface
and then click on “Update device” in the drop-down menu to check if there is
any new version update.
Turn Off/Sleeping Function
Turn Off: Press the HOME button on the controller for 5s.
Sleeping: When the controller is connected wirelessly, it will automatically
enter sleeping mode after 20 minutes without any operation on the controller.
When the auto TURBO is turned on, the controller will not enter sleeping mode.
Charging Function
Charging Power: standard USB 5V voltage. The controller can be charged by
connecting the USB port of the phone charger, computer, etc.
Fully charged will take about 2-3 hours.
Controller State | Battery State | Indicator State |
---|---|---|
Working State | Low Battery | Flash Slowly |
Charging | Remain ON | |
Fully Charged | Remain OFF | |
Power OFF | Charging | Remain ON |
Fully Charged | Remain OFF |
Reset Function
When the controller has a functional disorder, freezes, or other
abnormalities, please use a needle to poke the reset button hole on the back
of the gamepad to restore the factory settings.
After restoring, please re-connect and pair it.
Product Specifications
Product Model | GC10D |
---|---|
Connection Method | Wired/Bluetooth/2.4G Dongle |
Input Current | Type-C, DC 5V/500 mA |
Working Current | 3.7V/35—105 mA |
Working Power | Built-in 800mAh lithium battery |
Charging Time | About 3H |
Playing Time | About 15-20H |
Product Size | About 15810658mm |
Product Weight | About 225 g |
Use Temperature | 10-40 C |
Use Humidity | 20-80 % |
Attention
- Avoid strong vibration, do not disassemble, modify or repair by yourself.
- Prevent water or other liquids from entering the controller to avoid damage.
- Avoid storing in humid, high-temperature, oily smoke, and other places.
- Built-in battery, please do not throw the controller into the fire to avoid an explosion.
- Children should be under adult supervision at all times when using this product.
- If you have any problems or suggestions about the product, please contact the seller or the after-services.