LYTARA JQ82 Dimmable Wireless Picture Light User Guide
- June 17, 2024
- LYTARA
Table of Contents
LYTARA JQ82 Dimmable Wireless Picture Light
INTALLATION STEPS
- Put the specification in the place where it needs to be installed, mark the approximate position of the hole on the wall with a pen.
- Drill two holes on wall .
- ix the screws on the wall.
- Hang the lamp base on the screws and tighten the screw in side of base. Done !
Using method
- Recharging: Use the cable in package to charging with the USB-C port.
- Power display: lt respectively displays 30%-60%-90% power. The indicator light will be on when the light is on, the corresponding power indicator will flash during the charging process, and the indicator will stop flashing when it is fully charged.
- Light Colors: After turn light on , just tap the touch sensor to choose light colors.
- Turn Light on /off &Dimmable: Short press the another touch sensor to turn light on/off, long press to dim.
- Remote Control: The remote control distance is 4M/13FT.Aim at the picture light.
Warranty
- Dear Customer:
- For your better using experience, We offer 1 year after sale service, lf you have any question, please don’t hesitate to contact us via amazon email from your order page. we are always here providing prompt response and good solutions to you within 12 hours.
Information
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>