xCool 3 in 1 Pink Portable Protein Shaker Bottle and Blender User Manual

3 in 1 Pink Portable Protein Shaker Bottle and Blender
User Manual

FAQs on xCool Protein Shaker Bottle

What color is the indicator light when the product is being charged?

|
---|---
After the USB cable is connected to charging port on the blender and power adapter, the indicator is red.| When the product is fully charged, the indicator is white.

What color is the indicator light when the product is operating?

| ● There is only one button on the product. Double-tap the button. Then the indicator light turns white and the product operates at full speed.
---|---
● The indicator light is red during charging and it turns white once the product is fully charged.
| Three possible causes:
1. When the battery voltage is lower than 7.2 V, the indicator light blinks red, and the product stops operating.
2. If the indicator light blinks red during operation, the battery may be running out.
3. When the blades are jammed with food during operation, the product stops operating immediately
and the indicator light blinks red. If you press the button when the blades are jammed, the product does
not respond.

How can I stop the product from blending?

Pressing the button during operation immediately stops the product.

What is the recommended time interval between operations?
When the battery is fully charged, the product can perform 8–10 operations.
The duration of each operation is set to 40 seconds. The interval between operations shall be no less than 3 minutes. After performing 5 continuous operations, the product needs to rest for 10 minutes.

Why can’t I charge the product and what should I do?

1. The charging voltage falls below 5 V, and the charging current is less than 1 A.| Check whether the USB port or the adapter is broken. If either is broken, use another adapter or socket to charge the product.
Should both be functioning properly, contact us for a refund or replacement.
2. The charging cable is broken.
3. There is a problem with the battery in the blender.

Why is the blender not functioning?

user manual. When the indicator light turns from red to white, the product is fully charged. You can use the product once it is fully charged.
2. The volume of the ingredients that have been added to the bottle exceeds 400 mL, the Max. for Food Stirring.| Remove some of the ingredients that have been added to the bottle to ensure that the volume of the ingredients to be blended is less than 400 mL.
3. The two dots on the product are not aligned.| Align the two dots as shown in the following illustration. This is a safety lock design to prevent you from hurting yourself.

Why did the protein powder clump up?

There are five possible causes:

1. The shaking time was not long enough.

2. Too much protein powder or not enough liquid has been added to the bottle.

3. The container of the protein powder was not sealed as it should have been.
   Therefore, the protein powder has been exposed to moisture, making it easy to form clumps.

4. The liquid that has been added to the bottle was too hot or too cold.

5. The protein powder that has been added to the bottle is prone to clumping.
   A greater volume of liquid is required to dissolve whey protein powder.

How can I make a fully-dissolved protein shake?

• Add water first, then protein powder.

• The water should be neither too hot nor too cold. Blending protein powder with water that is too hot or too cold can result in clumping or gelatinization.
  Water at room temperature (approximately 68°F/20°C) is optimal.

• The ratio of water to powder should be moderate. It is recommended to use one scoop of powder with 175 mL of water. Do not add more than 4 scoops of powder to your xCool Protein Shaker Bottle.

• After the protein powder is fully dissolved in water, you can add some milk for a better taste.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>