COKYISS HA800 High Fidelity 8 Channel Headphone Amplifier User Manual
- June 17, 2024
- COKYISS
Table of Contents
COKYISS HA800 High Fidelity 8 Channel Headphone Amplifier
Operating instructions
Applications
The following figure shows an example of how to use the MicroAMP HA800.
- 1 .Read these instructions.
- Keep these instructions.
- Heed all warnings.
- Follow all instructions.
- Do not use this apparatus near water.
- Clean only with a dry cloth.
- Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- Do not install near any heat sources such as radiators, heat registers, stoves,or other apparatus (including amplifiers) that produce heat.
- Do not defeat the safety purpose of the polarized or grounding-type plug.A polarized plug has two blades with one wider than the other.A rounding-type olua has two blades and a third qrounding prong. The wide blade or thethird prong are provided for your safety. If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet.
- Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,and the point where they exit from the apparatus.
- Use only attachments/ accessories specified by the manufacturer.
- Use only with the cart stand, tripod, bracket,or table specified by the manufacturer,or sold with the apparatus. When acart is used. use caution when moving the cart/apparatus combination to avoid injury from tip-over.
- Unplug this apparatus during lightning storms or when unused for long periods of time.
- Refer all servicing to qualified service personnel.Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged,liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture,does not operate normally,or has been dropped.
- The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection.
- Where the MAINS plug or an appliance coupler is used as the disconnect device,the disconnect device shall remain readily operable.
- Correct disposal of this product:This symbol indicates that this product must not be disposed of with household waste, according to the WEEE Directive(2012/l 9/EU)and your national law.This product should be taken to a collection center licensed for the recycling of waste electrical and electronic equipment (EEE).The mishandling of this type of waste could have a possible negative impact on the environment and human health due to potentially hazardous substances that are generally associated with EEE.At the same time,your cooperation in the correct disposal of this product will contribute to the efficient use of natural resources.For more information about where you can take your waste equipment for recycling, please contact your local city office or your household waste collection service.
Welcome to Product
Thank you for showing your confidence fin us by purchasing the HAB00 MicroAMP
HAB00.
This a-channel stereo headphone amplifier is designed for use with all types
of headphones and therefore provides maximum flexibility. Its high-power
stereo amplifiers guarantee the highest sonic quality even at maximum
volume.The ultra-low-noise 4580 operational amplifiers ensure outstanding
audio performance.
Connectors and Control Elements
HAB00 connectors and control elements
-
Connect the power supply unit to your HABOO using the 12 V connector. Connecting the power supply unit to the mains automatically switches the HA800 on. To disconnect the unit from the mains,pull out the main cord plug.
When installing the product, ensure that the plug is easily accessible. If mounting in a
rack, ensure that the mains can be easily disconnected by a plug or by an all- pole disconnect switch on or near the rack. -
Connect up to 8 headphones .
-
The signal source has to be connected to this l /8″TRS connector(INPUT).
In case the volume level of the signal source is set too high,the HA800 may produce distortion! -
This ON LED is illuminated as soon as the unit is connected to the power.
-
Using the LEVEL controls you can set the volume of each headphone output.
High volume levels can damage your hearing or your headphones. Please turn down all volume controls to zero (all the way to the left) before you power up the amp.Always make sure you use appropriate volume levels.
SERIAL NUMBER. The serial number of the HAB00 is located at the bottom.
Specifications
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>