ALTEC LANSING ABT385 Power Duo Tower Speaker Set User Guide
- June 17, 2024
- Altec Lansing
Table of Contents
ALTEC LANSING ABT385 Power Duo Tower Speaker Set
Product Information
- Specifications
- Model: ABT385
- Connectivity: Bluetooth, RCA, AUX
- Power Source: Outlet
- Remote Control: Included
- Speaker Set Up
- The cable attached to your satellite speaker has TWO plugs. The RCA plug connects to the OUTPUT port and the AUX cable connects to the LIGHT port on the main speaker.
- Plug in the connected POWER cable on the satellite speaker to an available outlet in your home.
- Press the power button on the included remote to turn the speakers on. You will hear two (2) quick beeps indicating the speakers are on.
- Bluetooth Pairing
- Make sure the satellite speaker and main speaker are connected and the speakers are plugged into a power source.
- Press the BT button on your remote control to enter Bluetooth mode.
- Go to the settings on your smartphone/device.
- Select Bluetooth Manager and choose ABT385. Once connected, you will hear one (1) beep. This indicates your smartphone/device is paired.
- Adjust the volume by pressing the + or – buttons on the main speaker or the remote control.
- To change the music track, press the (forward) and (backward) buttons on the remote control.
- To change the color of the lights, press the LIGHTS button on the remote control.
- To change the bass and/or treble levels, press the TONE button on the speaker and then select the + to increase or the – to decrease.
FAQs
- Q: How can I troubleshoot audio connectivity issues?
- A: If you are experiencing audio connectivity issues, try the following steps:
- Ensure that both speakers are properly connected and to a power source.
- Check if the Bluetooth pairing between your smartphone/device and the speakers is successful.
- Make sure the volume is not muted or set too low on either the speakers or your smartphone/device.
- Try disconnecting and reconnecting the Bluetooth connection between the speakers and your smartphone/device.
- If the issue persists, refer to the troubleshooting guide in the user manual or contact customer support.
- Q: Can I use the speakers without Bluetooth?
- A: Yes, you can use the speakers without Bluetooth by connecting them to a device using the RCA or AUX cables. Simply plug in the appropriate cable into the corresponding port on the main speaker and connect it to your device’s audio output.
TROUBLESHOOTING
SPEAKER SET UP: To connect the satellite speaker to the main speaker:
- The cable attached to your satellite speaker has TWO plugs. The RCA plug connects to the OUTPUT port and the AUX cable connects to the LIGHT port on the main speaker.
- Plug in the connected POWER cable on the satellite speaker to an available outlet in your home.
- Press the power button on the included remote to turn the speakers on. You will hear two (2) quick beeps indicating the speakers are on.
BLUETOOTH PAIRING
To connect your smartphone device to the speakers via Bluetooth:
- Make sure the satellite speaker and main speaker are connected and the speakers are plugged into a power source.
- Press the BT button on your remote control to enter Bluetooth mode.
- Go to the settings on your smartphone/device.
- Select Bluetooth Manager and choose ABT385. Once connected, you will hear one (1) beep. This indicates your smartphone/device is paired.
- Adjust the volume by pressing the + or – buttons on the main speaker or the remote control. To change the music track press the (forward) and (backward) buttons on the remote control.
- To change the color of the lights, press the LIGHTS button on the remote control.
- To change the bass and/or treble levels, press the TONE button on the speaker and then select the + to increase or the – to decrease.
POWER DUO TOWER SPEAKER SET (ABT385)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>