STACEYM YC-617W22 Wireless Charger Instructions
- June 17, 2024
- STACEYM
Table of Contents
STACEYM YC-617W22 Wireless Charger Instructions
Specification
- Product Name: Wireless Charger
- Model: YC-617W22
- Trademark: Astrohue
- Manufacturer: STACEYM LIMITED
- Importer: STACEYM LIMITED
- Manufacturer Address: GB, N4 3LD, London, London, Moray Road, 29a
- Email:lalisaqin@Outlook.com
- Input: DC 9V/3A
- Output: Watch Output: 3W(Max.) Earbuds Case: 5W(Max.) Wireless Phone Output: 15W(Max.)
- Product Size: 170mm145mm14mm
- Weight: 200g
Made In China
Name: Sea&Mew Accounting Ltd (German agent)
Adresse: Electric Avenue Vision 25, London, Enfield EN3 7GD
E-Mail: info@seamew.net
Ansprechpartner: Billy Han
UK Warning
- Use the correct power supply: Ensure to use the power supply recommended or provided by the charger manufacturer. Using an unsuitable power supply may cause the charger to overheat, cause electric shock, and even cause a fire.
- Do not cover the device during charging: When the device is charging, it should not be covered to prevent excessive heat generation. Excessive heat may cause damage to batteries and equipment.
- Avoid contact with metal objects: Wireless chargers should not be placed near metal objects during charging, as they may interfere with the charging process and may even cause overheating or fire.
- Avoid using damaged chargers: If there is any obvious damage to the wireless charger, such as broken wires, cracks, loose components, etc., it should not be used again. Using a damaged charger may cause electric shock or fire.
Instructions for Use
Connect the adapter and turn on the power. Place the device in the charging area. Cover the device or place the charger near a metal object. If there are signs of damage to the charger, immediately stop using it.
WEEE
Information on electrical and electronic equipment The following notice is intended for private end-users using electrical and/or electronic equipment.
-
Separate collection of waste equipment
Electrical and electronic equipment that has become waste is referred to as waste equipment. Owners of old equipment must record them separately from unsorted municipal waste. In particular, old equipment does not belong in household waste, but in special collection and return systems. -
Batteries and accumulators
Owners of waste equipment shall, as a rule, separate waste batteries and accumulators which are not enclosed by the waste equipment from it before being handed over to a collection point. This does not apply if the waste equipment is handed over to public waste management bodies and separated from other waste equipment there for the purpose of preparation for reuse. -
Possibilities of returning old equipment
If you own old equipment, you can return or collect old equipment for the purpose of proper disposal of the old equipment to the facilities established and available by public waste management bodies. Where appropriate, it is also possible to hand over electrical and electronic equipment for the purpose of reusing the equipment. Further information can be obtained from the respective collection or collection centre. Return point. -
Privacy Policy
Old equipment often contains sensitive personal data. This applies in particular to information and telecommunications technology devices such as computers and smartphones. In your own interest, please note that each end user is responsible for the deletion of data on the waste equipment to be disposed of.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement:
The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated withminimum distance between 20cm the radiator your body. The device is in compliance with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations SI 2017:1206 (as amended). This device was tested for uncontrolled environment operations. To comply with RF exposure requirements, a minimum separation distance of 20cm must be maintained between the user’s body and the product.
Declaration of Conformity:
Hereby, STACEYM LIMITED declares that the product YC-617W22 is in compliance
with the following Regulations: Radio Equipment Regulations 2017, Electrical
Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electrical Equipment 2012. The Full
test of the UK declaration of conformity is available at the following
internet address:
https://www.amazon.co.uk/sp?ie=UTF8&seller=A2VKMMG8H7HHYS&asin=B0CDQ4TTS1&r
ef_=dp_merchant_link&isAmazonFulfilled=1
This device in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU. All essential radio test suites have been
carried out. This restriction will be applied to all Member States of European
Union. This device was tested for uncontrolled environment operations. To
comply with RF exposure requirements, a minimum separation distance of 20cm
must be maintained between the user’s body and the product. Declaration of
Conformity Hereby, STACEYM LIMITED declares that the product type YC-617W22 is
in compliance with Directives 2014/53/EU & 2011/65/EU. The full text of the EU
declaration of conformity is available at the following internet address:
https://www.amazon.co.uk/sp?ie=UTF8&seller=A2VKMMG8H7HHYS&asin=B0CDQ4TTS1&r
ef_=dp_merchant_link&isAmazonFulfilled=1
TX/RX Frequency Range and Max Radiated H-Field(Only for EU&UK):
Phone: 110-148kHz; Max Radiated H-Field: 1.95 dBuA/m(@10m)
TWS: 110-148kHz; Max Radiated H-Field: -17.23 dBuA/m(@10m)
watch: 300-350kHz; Max Radiated H-Field: -6.31dBuA/m(@10m)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>