Quotoo Y308 3 in 1 Magnetic Wireless Charger User Manual
- June 17, 2024
- Quotoo
Table of Contents
Quotoo Y308 3 in 1 Magnetic Wireless Charger
Thank you for purchasing our product, please read this manual carefully before use.
Packing list
Product Description Comp
Specification yield
| Model： | Y308 |
|---|---|
| lnput： | 5V 3A 9V 2A |
| Qutput Phone： | 15W/10W/7.5W/5W |
| AirPods： | 5W |
| Watch： | 2.5W |
Compatible Models
-
Smartphone
For iPhone: iPhone 15,iPhone 15 Plus,iPhone 15 Pro, Phone 15 Pro Max, iPhone 14,iPhone 14 plus,iPhone 14 Pro,iPhone 14 Pro Max,iPhone 13, iPhone 13 Pro,iPhone 13 Pro Max, Phone 13 mini,iPhone 12,iPhone 12 mini, iPhone 12 Pro,iPhone 12 Pro Max -
Apple headphones
For Apple Headphones: AirPods Pro2, AirPods Pro, AirPods 3, AirPods 2 -
Smartwatch
For the watch: Hermès/Nike/Ultra 2/Ultra/9/8/7/6/5/4/3/2/SE
Various ways to use the product
Use of touch switches
After connecting the product to the power supply, the RGB light cycle will always be on.
- When charging the cell phone: the RGB color light cycle is always on, lightly press the touch switch 1 time, RGB color light off
- When the phone is not charging: press the touch switch once, and the RGB color lights will start to light up cyclically. Press the touch switch once again, the RGB color light will turn off.
Note: Turning off the RGB color light will not affect the normal charging of the phone
Indicator Light Status
| Status | indicator |
|---|---|
| Power-on Notification | RGB color light cycle always on |
| state of charge | RGB color light cycle always on |
| foreign object detection | Green light blinks rapidly |
How to use the product
- Charge the phone: Connect the charging head to the wireless charging input-C connector, then put the phone in the wireless charging area, when the RGB color light is always on, it means the phone is charging normally, if the phone is not charging normally, the RGB green light flashes rapidly.
- Charge your cell phone : Connect the charging head to the wireless charging input-C-type connector, then place your cell phone in the wireless charging zone to start charging.
- Charge the watch: Place the watch on the watch charging module and when you see the charging indication light up on the watch display, it means the watch is charging properly.
Warm Tips
Please pay attention to the following issues, otherwise, it may cause irregular charging, high charging temperature, intermittent charging, or even no charging.
- Please place your phone/watch/headset in the correct charging area.
- We recommend a fast charger (9V/2A), which can charge three devices at the same time while maintaining the fastest speed.(5V/3A) chargers can only provide normal charging speed and will be slower than fast chargers.
- The charging distance is 2-8mm, please do not wear a protective cover that is thicker than 3mm.
- During the charging process, there is no metal or magnetic object around 6 cm in the center of the back of the phone
- The lower the temperature, the faster the charging speed, winter charging speed is faster than summer.
- Please do not charge in high-temperature and humid environments to avoid damage to the circuit.
- Please put it out of reach of children to avoid unnecessary accidents.
FCC STATEMENTS
About the FCC
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance 20cm between the radiator & your body.
This device complies with part 15 of the FCC rules operations subject to the
following two conditions:
- this device may not cause harmful interference.
- this device must accept any interference received including. interference that may cause undesired operation.
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with a minimum distance of
20cm between the radiator & your body.
If you are not satisfied, please contact us.
Made in China