TAMRON A068 VXD Lens Australia Camera Owner’s Manual
- June 17, 2024
- TAMRON
Table of Contents
TAMRON A068 VXD Lens Australia Camera
Product Information
Specifications
- Model: A068
- Compatible with: Sony E
- Zoom range: 17-50mm
- Maximum aperture: F/4
- Focus type: Auto focus
- Minimum focus distance: 0.19m (7.5″) (at wide-angle) / 0.3m (11.8″) (at telephoto)
Frequently Asked Questions
- Q: Where can I find support for this product?
- A: You can visit our website for consumer support at https://www.tamron.com/global/consumer/support/ .
Thank you for purchasing this Tamron lens. Before using your new lens, please read the contents of this manual to use the lens correctly. It will also be important to read the manual for the camera you will be attaching the lens to. Keep the manual in a safe and easily accessible place after reading it. Also read the document “Regulations for the safe use of Tamron lenses” that comes with the lens for detailed information safety precautions to be followed when using Tamron lenses.
- Describes precautions to help you avoid problems.
- Explains things you should know besides basic operation.
PART NAMES
PART NAMES (see Fig. 1)
- Lens hood
- Alignment marks for attachment of lens hood
- Mark for blocking the light shield
- Filter ring
- Lens hood release mark
- Focusing ring
- Focal length scale
- Focal length mark
- Focus setting button
- Zoom ring
- Connection connector
- Lens attachment mark
- Lens-camera contact surfaces
MAIN TECHNICAL SPECIFICATIONS
- Model: A068
- Focal length: 17 – 50 mm
- Maximum aperture: F/4
- View angle (diagonal): 103°41′ – 46°48′
- Optical construction: 13/15
- Minimum focusing distance: 0.19m (7.5″) (Wide-angle lens) / 0.3m (11.8″) (Telephoto lens)
- Maximum magnification: 1:4.6 (minimum focusing distance with wide-angle lens)
- 1:3.8 (minimum focusing distance with telephoto lens)
- Filter size: ø 67 mm
- Length: 114.4 mm (4.5″)
- Maximum diameter: ø 74.8 mm
- Weight: 460g (16.2oz)
- Anti-light protection: HA062
- Connector type: USB Type-C
Warning
- Length: From the front of the lens to the mounting surface.
- Specifications, appearance, features, etc., are subject to change without notice.
ATTACH AND REMOVE THE LENS
- Remove the back cover of the lens. Align the lens attachment mark ⑫ and the mounting mark on the camera. Then insert the lens.
- Turn the lens clockwise until it locks.
- To remove the lens: Rotate the lens in the opposite direction while pressing the lens release button on the camera.
- Turn off the power to the camera before attaching or removing the lens.
- For more information, read the instruction manual for your camera.
FOCUS MODE
CHANGE FOCUS MODE
- Select the desired focus mode on the camera.
- Set the desired focus manually by turning the focusing ring ⑥.
- For more information, read the instruction manual for your camera.
- In AF mode, it may be difficult to use the function depending on the subject.
FOCUS ADJUSTMENT KNOB (see Fig. 1)
- Press the focus setting button ⑨ to use the function that has been set by the camera.
- See the camera’s user manual for more information.
CONNECTION CONTACT AND ZOOMING
CONNECTION CONTACT (see fig. 1)
Lenses with the connection connector ⑪ can be connected to a computer using the TAMRON connection cable (sold separately). Then you can, using the accompanying application “TAMRON Lens Utility TM”, update the camera’s firmware and register new functions to the focus setting button ⑨.
- See the online help for more information on “TAMRON Lens Utility” by following the link below. https://www.tamron.com/jp/consumer/support/help/lensutility/en/
- Do not use the TAMRON connection cable (sold separately) for any purpose other than connecting the TAMRON lens, equipped with a connection connector, to a computer.
- Tamron assumes no responsibility for loss or damage of data in connection with the use of the TAMRON connection cable (sold separate).
ZOOMING (see fig. 1)
- Turn the zoom ring ⑩ when you want to adjust the focal length (zoom position) to the desired position.
BACKLIGHT PROTECTION
BACKLIGHT PROTECTION (see fig. 1, 2, 3)
- The lens hood ① can prevent unwanted light that could otherwise affect the image.
Use the lens hood (see fig. 2)
- Align the hood attachment alignment marks ② on the hood with the hood release mark ⑤ on the lens.
- Turn the lens hood ① in the direction of the arrow until the lens hood locking mark ③ matches the lens hood mark release of light shield ⑤.
Buckle up the lens hood (see fig. 3)
- Attach the light shield ① in the reverse direction and rotate until it locks.
- Be aware that the outer edges of the photographed image may become dark if the cover ① is not attached correctly.
PRECAUTIONS FOR USE
- An internal focusing system (IF) is used to achieve minimum focusing distance. It is possible that the viewing angle will be wider than that which is used on lenses with other focusing systems when shooting at a distance shorter than infinity.
- The hood or lens may block the light from the flash. We recommend that test photography be carried out in advance.
- Differences in the display systems between different cameras may cause values other than the maximum and minimum aperture values to be displayed from the specifications. This is not an indication of an error.
- Do not touch the lens-camera contact surfaces ⑬ with your fingers. Otherwise, it may cause errors.
- If the temperature changes suddenly, condensation may occur and cause malfunctions.
- The front lens is covered with anti-dirt coating. After removing dust from the lens surface with a blower or otherwise, wipe it off with a dry cloth.
- Never use benzene, thinner or other organic solvents to clean the lens.
- Store the lens in a clean and well-ventilated place.
- For more information on lens cleaning and storage, camera compatibility and other support information, see our website. https://www.tamron.com/global/consumer/support/
Disposal
Disposal of electrical and electronic equipment in private households. Disposal of used electrical and electronic equipment (applies within the European Union and other European countries including separate collection systems)
This symbol indicates that the product must not be treated as household waste. It must instead be collected for separate recycling of electrical and electronic equipment. If the new products are purchased, this product can be handed over to the retailer or to recycling stations for collection of waste electrical and electronic equipment eventually.
By ensuring that this product is disposed of correctly, you can help reduce possible negative effects on the environment and human health, which may otherwise be caused by incorrect waste management of the product or parts of it. If the product is disposed of illegally, it may result in possible sanctions. For more information, contact your municipal office, your local waste disposal or the shop where you bought the product.
Regulations
Regulations for the safe use of Tamron lenses
- For safe use, be sure to carefully read the “Regulations for safe use of Tamron lenses” and manual before using the product.
- After you read them, keep them in a place where they can be easily read again if needed.
- The precautionary instructions are divided into the following two categories depending on the degree of danger.
WARNING: This indicates instructions that one does not follow or one does performed incorrectly, may result in death or serious injury.
- Do not look at or photograph the sun or a strong light source with the lens or in a camera to which a lens is mounted.
- Doing so may result in loss of vision, damage to the lens or camera, or fire.
- Do not disassemble, repair or modify the lens.
- This may damage the lens or camera.
- To keep the lens out of the reach of children.
- There is a risk of damage to the lens if it is dropped or dropped.
CAUTION: This indicates instructions that have not been followed or that are incorrect, may result in bodily injury or physical harm.
- Do not place the lens in direct sunlight or leave it in an extremely hot place such as inside a car.
- Doing so may damage the internal parts of the lens or cause a fire.
- Always attach the lens cap when the lens is not in use.
- When attaching the lens to the camera, check that the lens is properly attached to the camera and is properly locked.
If the lens is not properly attached, it may be difficult to remove or it may fall off, which may result in injury.
- Do not use the lens for anything other than photography.
- Do not transport the lens while it is still attached to a tripod.
- Applicable to the lens equipped with a connection connector
- Place the lens in a stable place when adjusting the lens using the special application (TAMRON Lens Utility TM). Make sure it does not fall or hit the lens.
- Use a Tamron connection cable (sold separately) when connecting the lens to a computer.
- Do not touch the connector with your fingers or a metal object. Also avoid dust or water sticks to the connection plug. If the connection plug is dirty, it can cause connection problems.
- Tamron is not responsible for damage caused by malfunction, fire or other accidents that may occur when you using a non-Tamron accessory. Please note that such damage will be repaired of the Tamron lens to be charged as it is not covered by warranty.
The Marking is a directive conformity mark of the European Community (EC).
The EEC Conformity Report applies to the Council Directive 2014/30/EU,
2011/65/EU and is used by Tamron Co., Ltd., manufacturer of this product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>