TAMRON A068 17 50mm Wide Angle Zoom Lens Owner’s Manual

: June 17, 2024
: TAMRON

Table of Contents

TAMRON A068 17 50mm Wide Angle Zoom Lens
PART NAMES
MAIN TECHNICAL DATA
ATTACHING AND REMOVING THE LENS
FOCUS MODE
CONNECTION PORT
LENS COVER
PRECAUTIONS DURING USE
Safety Information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

TAMRON A068 17 50mm Wide Angle Zoom Lens

TAMRON-A068-17-50mm-Wide-Angle-Zoom-Lens-PRODUCT

Thank you for purchasing this Tamron lens. Before you start using our new lens, please read this manual manual to familiarize yourself with the operation of the lens. It is also important to read the user manual of the camera you are using the lens will be attached. After reading the User Manual, put it away in a safe place. Also read the “Precautions for the Safe Use of Lenses” included with your lens Tamron” for specific precautions to follow when using lenses Tamron.

This symbol indicates precautions to prevent problems.
This symbol indicates additional information you may want to read.

PART NAMES

PART NAMES (see Fig. 1)

TAMRON-A068-17-50mm-Wide-Angle-Zoom-Lens-FIG-1

Lens hood
Hood mount alignment mark
Cover lock mark
Filter ring
Hood release mark
Focus ring
Focal length scale
Focal length designation
Focus button
Zoom ring
Connection port
Lens mounting mark
Lens-camera interface pins

MAIN TECHNICAL DATA

Model: A068
Focal length: 17 – 50 mm
Maximum opening of the aperture: F/4
Viewing angle (diagonal): 103°41′ – 46°48′
- 13/15 optical design
Minimum focusing distance: 0.19 m (7.5 in.) (Wide) / 0.3 m (11.8 in.) (Telephoto)
Maximum magnification ratio: 1:4.6 (minimum focusing distance of wide-angle lens)
- 1:3.8 (minimum telephoto focusing distance)
Filter size: ø 67 mm
Length: 114.4 mm (4.5 in)
Maximum diameter: ø 74.8 mm
Weight: 460 g (16.2 oz)
Lens hood: HA062
Connector type: USB Type-C

Warning

Length: From the front end of the lens to the mounting surface.
Specifications, appearance, features etc. are subject to change without prior notice.

ATTACHING AND REMOVING THE LENS

Remove the rear lens cap. Align the lens mount mark ⑫ with the mark on the camera, and then attach lens.
Rotate the lens clockwise until it locks.
To remove the lens, rotate it in the opposite direction while pressing the release button on the camera.

Turn off the camera’s power before attaching or removing a lens.
For details, refer to the camera’s instruction manual.

FOCUS MODE

SWITCHING THE FOCUS MODE

Select the camera’s focus mode.
To focus manually, rotate the focusing ring ⑥ appropriately.
For details, refer to the camera’s user manual.

In AF mode, it may be difficult to focus on a selected subject automatically.

FOCUS BUTTON (see Fig. 1)

Press the focus button ⑨ to use the function assigned by the camera.
Please refer to your camera’s user manual for more details.

CONNECTION PORT

CONNECTION PORT (see Fig. 1)

Lenses with connection port ⑪ can be connected to a computer using a TAMRON connection cable (sold separately). Then, using the dedicated “TAMRON Lens Utility TM” application, you can update the firmware and register the functions of the focus button ⑨.

For more details, please refer to the online help of “TAMRON Lens Utility” at the link below. https://www.tamron.com/jp/consumer/support/help/lensutility/en/

Do not use the TAMRON connecting cable (sold separately) for purposes other than connecting to a computer TAMRON lens equipped with a connection port.
TAMRON is not responsible for any loss or corruption of data when using a TAMRON connecting cable (sold separately).

ZOOMING IN/OUT (see Fig. 1)

Turn the zoom ring ⑩ to set the appropriate focal length (zoom position).

LENS COVER

LENS COVER (see Fig. 1, 2, 3)

The cover ① can eliminate scattered light that adversely affects the quality of photos.

Using the lens hood (see Fig. 2)

Align the hood attachment mark ② on the hood with the hood release mark ⑤ on the lens.
Rotate the cover ① in the direction of the arrow until the cover lock mark ③ aligns with the release mark covers ⑤.

Put the lens cover aside (see Fig. 3)

Attach the cover ① in reverse order and rotate until it locks.
Please note that the periphery of the photo may appear darker if the hood ① is not attached correctly.

PRECAUTIONS DURING USE

An internal focusing (IF) system is used to reduce minimum focusing distances. While when photographing objects closer than infinity, the angle of view may be larger than with lenses using different focusing systems.
The lens hood or barrel may block the light emitted by the flash. We recommend taking a test photo.
Differences between camera display systems may cause values shown to differ from those stated in the data technical maximum and minimum aperture opening values. This is not a fault.
Do not touch the lens-camera interface contacts ⑬ with your fingers. Otherwise, a malfunction may occur.
If the temperature changes suddenly, moisture may condense and cause a malfunction.
The front lens is protected with a protective coating. After removing dust from the lens surface using compressed air or other agent, wipe it with a dry cloth.
Never use benzene, thinner or other organic solvents to clean the lens.
Store the lens in a clean and well-ventilated place.
Learn more about cleaning and storing lenses, camera compatibility and more support information can be found on our website at. https://www.tamron.com/global/consumer/support/

Disposal

Disposal of electrical and electronic equipment used in households Disposal waste electrical and electronic equipment (applies to the European Union and other European countries with separate waste collection systems)

This symbol means that this product should not be treated as household waste. It must be recycled separately at a collection point for electrical and electronic equipment. If you purchase a new product, you can return this product to the distributor or take it to a store collection of used electrical and electronic equipment.

Disposing of used equipment appropriately prevents potentially harmful impacts on the environment and human health that could be affected by incorrect disposal of this product and its components. If this product is removed illegally, you may be subject to fines. More detailed information about recycling this product can be obtained by contacting your local government unit, company household waste management company or the store where the product was purchased.

Safety Information

Safety precautions using Tamron lenses

To use the product safely, please read carefully before use “Precautions for the Safe Use of Tamron Lenses” and user manuals.
After reading, the documents should be placed in a place where you can quickly access them when necessary check important information.
The safety instructions are divided into the following categories, which vary in their level of risk.

WARNING: This item draws attention to the instructions that apply non- compliance or incorrect conduct may result in death or serious injury.

Do not look at the sun or any other strong source of radiation with a lens or camera, on which the lens is mounted. You are also not allowed to take photos of the sun or any other strong source radiation.
Failure to follow these instructions may result in loss of vision or damage to the lens camera and fire.
Do not disassemble, repair or modify the lens.
Failure to do so may result in damage to the lens or camera.
Keep the lens out of the reach of small children.
Dropping or falling the lens poses a risk of injury.

WARNING: This item draws attention to the instructions that apply to them non-compliance or incorrect conduct may result personal injury and property damage.

Do not expose the lens to direct sunlight or leave it in very direct sunlight a hot place, for example inside a car. Failure to follow this recommendation may result in damage to the internal parts of the lens and cause a fire.
Always keep the lens cap on when not in use.
When attaching a lens to the camera, always ensure that the lens is properly attached attached and locked.
If the lens is not attached correctly, it will be difficult to remove and may fall during disassembly, causing damage or injury.
The lens should not be used for purposes other than photography.
Do not transport the lens while it is mounted on a tripod.
Applies to a lens equipped with a connection port
1. When adjusting the lens using the dedicated application (TAMRON Lens Utility TM), the lens should be placed on a stable surface. Make sure it won’t fall or hit the lens.
2. Use a Tamron connection cable (sold separately) to connect the lens to your computer. separately).
3. Do not touch the connection port parts with your fingers or metal objects. Furthermore, you should prevent dust or water from sticking to the connection port components. If port elements connection port are dirty, connection problems may occur.
Tamron is not responsible for damages resulting from failure, fire or other situations that may occur when using accessories other than Tamron accessories. It should be remembered that in the case of such Damaged Tamron lenses will be charged for repairs as they are not covered by warranty.