INTEX 28506 Pure Spa Headrest Owner’s Manual
- June 17, 2024
- INTEX
Table of Contents
INTEX 28506 Pure Spa Headrest
Product Information
- Product Name: Spa Headrest
- Model Number: 367
- Description: The Spa Headrest is designed to provide comfortable support for your head while using a spa or hot tub.
Specifications
- Dimensions: 4.875″ x 7.25″
- Date of Manufacture: 07/21/2023
Product Usage Instructions
Setup Instructions
- Inflate the headrest to the desired firmness. Do not overinflate or use a high-pressure air compressor to inflate. See Fig (1).
- Ensure the valve is securely closed and recessed. See Fig (2).
- Insert one side of the C-clamp through the loops at the back of the headrest. Make sure the wider side of the headrest is facing up. See Fig (3 & 4).
- Open the C-clamp and fix the headrest over the selected spa wall edge area. See Fig (5 & 6). Move the headrest along the C-clamp arm to adjust the height of the headrest.
Note: Adjust the firmness by releasing or adding more air.
FAQ
-
Can I use a high-pressure air compressor to inflate the headrest?
No, it is not recommended to use a high-pressure air compressor to inflate the headrest. Overinflating can cause damage to the product and may affect its performance. -
How do I adjust the height of the headrest?
To adjust the height of the headrest, simply move it along the C-clamp arm. Find the desired position that provides optimal comfort for your head. -
Can I use the Spa Headrest with any spa or hot tub?
Yes, the Spa Headrest is designed to be compatible with most spas and hot tubs. It can be easily attached to the spa wall edge area using the provided C-clamp.
WARNING
- To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
- This product is not a toy. Do not allow children to play with this product.
- This is not a flotation device.
- Never allow anyone to step, stand, sit or jump on this product.
- Remove product before placing a cover over the spa tub.
FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN SERIOUS INJURY OR DEATH.
Parts reference
NOTE: Drawings for illustration purposes only. Actual products may vary. Not to scale.
Setup instructions
- Inflate the headrest to the desired firmness. Do not over-inflate or use high-pressure air compressor to inflate. See Fig (1).
- Ensure the valve is securely closed and recessed. See Fig (2).
- Insert one side of the C-clamp through the loops at the back of the headrest. Make sure the wider side of the headrest is facing up. See Fig (3 & 4).
- Open the C-clamp and fix the headrest over the selected spa wall edge area. See Fig (5 & 6). Move the headrest along the C-clamp arm to adjust the height of the headrest.
NOTE: Adjust the firmness by releasing or adding more air.
Maintenance and storage instructions
- For cleaning use only mild soapy solution. Do not use any chemicals.
- Remove the headrest from the spa and separate the C-clamp from the headrest.
- Deflate the headrest completely and close the valve cap back.
- Clean and air dry thoroughly before folding.
- Lay the headrest flat, fold loosely and avoid sharp bends, corners and creases which can damage the headrest.
- The original packaging can be used for storage. Store in a dry, cool storage location.
- In case of repairs, use only common PVC repair glue and patches.
©2023 Intex Marketing Ltd. – Intex Development Co. Ltd. – Intex Recreation
Corp. All rights reserved
Printed in China
®™ Trademarks used in some countries of the world under license from an Intex
Development Co. Ltd., Hong Kong & Intex Recreation Corp., P.O. Box 1440, Long
Beach, CA 90801 • Distributed in
the European Union by Intex Trading B.V.,
Ettenseweg 46, 4706 PB Roosendaal – The Netherlands • Distributed in the UK by
Unitex Service (UK) Limited, 21 Holborn Viaduct, London EC1A 2DY, UK.
www.intexcorp.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>