THIRTY7 Components T7-T7TH01 T7 Tool Holder Instructions
- June 17, 2024
- THIRTY7 Components
Table of Contents
THIRTY7 Components T7-T7TH01 T7 Tool Holder
Product Information
Product Name: T7 Tool Holder 17 mm
Brand: THIRTY7 Components
Model Number: T7-KGCR01
Compatibility: Designed to hold THIRTY7 tools only
Specifications
- Size: 17 mm
- Mounting: Wall-mounted
- Mounting Method: Screws or bolts (not included)
Product Usage Instructions
- Choose a suitable location on the wall to mount the T7 Tool Holder.
- Ensure that the wall surface is clean and dry.
- If required, mark the position of the mounting holes on the wall using a pencil.
- Using appropriate screws or bolts, attach the T7 Tool Holder to the wall by aligning the mounting holes at the back with the marked positions on the wall.
- Tighten the screws or bolts securely to ensure stability.
- Once the holder is mounted, you can now clip your THIRTY7 tools into place.
- Ensure that the tool is securely clipped and not loose.
- If you have any questions or concerns about the product, please contact our customer support at support@t7components.com.
FAQ
Can I use this tool holder for tools from other brands?
No, the T7 Tool Holder is specifically designed to hold THIRTY7 tools only.
It may not be compatible with tools from other brands.
Are screws or bolts included with the product?
No, screws or bolts are not included with the T7 Tool Holder. You will need
to provide your own screws or bolts for mounting.
How do I contact customer support?
You can contact our customer support team by emailing us at
support@t7components.com. We will be happy to assist you with any questions or
concerns you may have.
Can I mount the tool holder on a different surface other than a wall?
The T7 Tool Holder is specifically designed to be mounted on a wall.
Mounting it on surfaces other than a wall may not provide the necessary
stability and may affect its functionality.
Can I use this tool holder outdoors?
The T7 Tool Holder is not specifically designed for outdoor use. It is
recommended to use it in indoor environments to ensure its longevity and
performance.
Thank you for choosing THIRTY7 Components! We appreciate your business, and your feedback is crucial to us. Please take a moment toread the instructions carefully to get the most out of your product. If you are satisfied with your purchase, please consider tagging us onsocial media platforms.
thirty7_officialPressurized
INSTRUCTIONS
- Please note that the T-handle radiator cap remover is designed to be used to remove and install specific motorcycle radiator caps only
- Before starting, ensure the motorcycle is off and has cooled down, wear protective gloves, and inspect the cap for any damage
- Place the T-handle cap remover onto the radiator cap and apply downward pressure, twist counterclockwise, and lift the cap off the radiator.
- Before the installation inspect the seal and cap itself.
- When refitting the cap, align it with the radiator opening, push down, and twist it clockwise until it locks securely.
- Consult the motorcycle manual for more specific instructions and safety precautions or contact us at support@t7components.com
Push and Turn Mechanism
The cap is equiped with a push-and-turn mechanism. Ensure that you push and
turn in the specified direction to safely open or close the radiator cap.
Pressurized System – Hot Coolant
Exercise extreme caution when dealing with pressurized systems and hot
coolant. Pressurized systems pose a risk of hot coolant release, which can
cause burns or scalding. Allow the system to cool sufficiently before removing
the radiator cap.
WARNING AND DISCLAIMER
Please be advised that any parts manufactured, designed or sold by THIRTY
SEVEN COMPONENTS (THIRTY7) should only be installed by a licensed motorcycle
technician or dealer. Motorcycles are inherently dangerous, and using them
improperly can result in serious injury, death, or damage to property. THIRTYZ
is not responsible for any damage or injury that may result from misuse or
improper installation of aftermarket parts. Customers must exercise caution
and good judgment when selecting, installing, and maintaining THIRTYZ
products. In the event of a defect in the material or design of any part,
THIRIX/ will either refund the purchase price or replace the part within
thirty (30) days of purchase, subject to inspection. Please note that any
attempts to modify or repair THIRTY7 products will void this warranty. THIRTY7
is not liable for any incidental or consequential damages, property damage,
personal injury damage, or any other kind of damage or expense. By purchasing
a THIRTY7 product, you acknowledge and agree to these terms and conditions.
THIRTY7 makes no other warranties, express or implied, including without
limitation any warranties of merchantability and fitness for a particular
purpose. We reserve the right to alter the terms, conditions, and notices
under which our products are offered.
- PN: T7-KGCR01
- t7components.com
- info@t7components.com