THE INTERESTING LAB BZ0001 The Boring Lamp User Manual
- June 17, 2024
- THE INTERESTING LAB
Table of Contents
**THE INTERESTING LAB BZ0001 The Boring Lamp User Manual
**
IN T H E BO X
In Boring Zero Box:1 2 3 4 5 6 7 8 In Boring 0.1 Box:1 2 4 7
- Charging Dock
- Battery
- Wireless Charging Base(Port A /B)
- LED Light Tube
- Retractable Lamp Post
- Power Cord
- USB-C Cord
- Magnetic Stand For Screen Light
A sse m b le in to a De sk La m p
-
Plug in the power cord
-
Port A connects to lamp post
-
Light tube connected to Lamp Post
-
Press and hold for 3 seconds to turn on the lamp
Unplug the light tube , connect it to the Port B of the base
Unplug the lamp post
Port A is for Bracket Only. Do not connect the battery here
-
When connected to Port B, enter the ambient light mode
Short touch one time to switch light mode, short touch 2 times to switch the light color -
Port A is for Bracket Only. Do not connect the battery or lamp tube here.
Assemble in to a Screen Light
Connecting the Portable Charging Dock to Power
Connect the light tube to the dock
Place magnetic stand on top of the monitor, connects to the light tube
When connected to the Portable Charging Dock, it is the same as the ambient light mode control Short touch one time to switch light mode, short touch 2 times to switch the light color.
Wireless Charging
Plug in the power cord
iPhone 12/13/14 put on top
Adjust your phone to any angle you like
Provides 7.5W-15W charging for
the iPhone 14
iPhone 13 & iPhone 12 series; The Charger maintains compatibility with Qi
charging, so it can be used to wirelessly charge your iPhone 8 or later, as
well as any Qi supported device, as you would with any Qi-certified charger
Battery Charging
Plug in the power cord
Connect The Battery Module to Port B
When the indicator light is always on, it is fully charged
The maximum battery capacity is 3000mAh(Standard version 3000mAh, Basic 1800mAh-2000mAh), allowing the lamp to provide lighting for 2 to 6 hours.
Warranty and Looking after your lamp
Lo o k afte r yo u r m a ch in e
Do not use in humid environment;
Do not use outdoors
Do not use in water or sand
Do not drop the product;
Do not hit people or anything with the Lamp
Look after your battery
To get the best performance and life from your battery, charge it regularly.
Your machine won’t operate or charge if the ambient temperature is below
5°C(41°F ). This is designed to protect both the Lamp and battery
FCC Statement:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. lf
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- ln crease the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
RF Exposure information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator &your body.