atlas formen AAA07 Wireless Speaker User Manual
- June 17, 2024
- atlas formen
Table of Contents
atlas formen AAA07 Wireless Speaker
To turn the Wireless Speaker on
- Press O to turn the speaker on.
- Press M to change the mode (wireless/FM radio).
- Wireless Speaker – using the buttons
- Next track: short press +
- Previous track: short press –
- Increase volume: long press +
- Decrease volume: long press –
- shot this alien mer presso a hang vice to all
- Long press M to start searching for FM stations
- Long press O to unpair the wireless device.
OPERATION
Function
Switching on and pairing: Long press the O button To pair the device with a
mobile phone or other wireless-en) abled devices, search for nearby devices
(details in the chapter on “pairing”).
Music Function
- Go to the next track: press + to go to the next track.
- Go to the previous track: press – to go to the previous track.
- Increase volume: long press + to increase the volume.
- Decrease volume: long press – to decrease the volume.
- Charging: charge the device using a USB cable connected to the connector on top.
FM Function
- Leave the speaker plugged in to charge it.
- Press M to enter FM mode.
- The first time you use the device, press M to start searching for all stations.
- When the search is finished:
- Press the + button to go to the next station.
- Press the – button to go to the previous station.
Precautions
- For your safety, please follow the instructions included in this user manual diligently.
- We strongly advise you to read this manual before using your wireless speaker.
- Be careful with edges, uneven surfaces, metal accessories, and packaging to avoid the risk of injury o damage.
- Do not attempt to alter, repair, or disassemble your wireless speaker. This could lead to fire, electric shock, or the complete failure of your wireless speaker, among other things.
- Not all of these issues are covered by the warranty.
- Do not use solvents or other volatile liquids to clean your wireless speaker.
- Do not use your wireless speaker in hazardous locations.
- Pairing with a mobile phone or other wireless-enabled device
- To use your speaker remotely, you must first pair it with a mobile phone or another wireless-enabled device.
- Once your wireless speaker has been paired with a device it will stay paired and the devices will automatically recognize each other when they are within range.
- Turn on your phone and make sure wireless functionality is enabled.
- Turn on the speaker and enter pairing mode.
- Find wireless devices on your phone according to the phone’s instructions.
- After a few seconds, the mobile phone will show the “AAA07” speaker as a discovered device. Select it and follow your phone’s instructions for pairing with it.
- The speaker is now connected to your phone.
Charging the Wireless Speaker
Charge the speaker using the USB cable provided, connected to a Micro-USB port. You must charge the speaker for approximately 4 hours before using it for the first time. Connect one end of the charging cable to a USB charging port on your computer and the other to the Micro-USB port. When you turn on the wireless speaker to charge it, the red light on the side will be lit continuously. The red light will turn off when the speaker is charged.
LED
LED colors: blue/green/white/red/yellow/orange/pink. The LED will turn
off when the speaker is turned off, you can also double-click M to turn it
off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>