Kolcraft W025-R2 2 in 1 Walker Instructions

Kolcraft W025-R2 2 in 1 Walker

Product Information

Specifications

• Product Name: 2-en-1 Walker
• Model Number: W025-R2
• Date of Publication: 11/11
• Weight Range: 15-26 pounds (6.8-11.8 kgs)
• Height Limit: Less than 32 inches (80 cms)

Product Usage Instructions

Important Safety Information
Read all instructions BEFORE assembly and USE of this walker. Keep instructions for future use.

Warning
Only use this activity walker (seated stage) if your child MEETS ALL of the requirements below:

1. Can support body weight with legs
2. Weight is between 15 and 26 pounds (6.8 and 11.8 kgs)
3. Height is less than 32 inches (80 cms)

Assembly Instructions
To Unfold and Assemble Walker

1. To unfold walker, pull up sharply on the tray. Raise upward.
2. Rotate top tray forward.
3. Attach Seat Pad:
   • Insert the front leg into the slot in the base. Press down on the top tray until the front leg button locks into the base.
   • Place seat pad into seat ring located on tray. Align it so that high back support aligns with back of walker ring.
   • Insert the 4 tabs on the seat pad into slots located around the front of the seat ring. Slide tabs through holes.
4. Attach Rear Wheels:
   • Underneath the tray, pull tabs and align into grooves.
   • Snap the back of the seat pad around the rear of the seat ring.
   • Test: Push down hard on seating area of seat pad to make sure seat is securely in place.

FAQ

• Q: What weight range does this walker support?
  A: This walker supports a weight range of 15-26 pounds (6.8-11.8 kgs).

• Q: What is the height limit for using this walker?
  A: The height limit for using this walker is less than 32 inches (80 cms).

• Q: Can I use this walker if my child cannot support their body weight with their legs?
  A: No, this walker should only be used if your child can support their body weight with their legs.

• Q: How do I secure the seat pad properly?
  A: Insert the front leg into the slot in the base, press down on the top tray until the front leg button locks into the base. Place the seat pad into the seat ring on the tray, aligning it with the high back support. Insert the 4 tabs on the seat pad into slots located around the front of the seat ring and slide them through the holes. Snap the back of the seat pad around the rear of the seat ring to ensure it is securely in place.

IMPORTANT SAFETY INFORMATION

WARNING Read all instructions BEFORE assembly and USE of this walker. Keep instructions for future use.

• How to Keep Your Child Safe While Using this Product
  • NEVER leave child unattended. Always keep child in view while IN WALKER.
  • CAUTION: Toys intended to be assembled by adult! STAIR HAZARD
  • Avoid serious injury or death. Block stairs/steps securely before using this walker.
  • Use only on flat surfaces free of objects that could cause this walker to tip over. Never use near stairs, steps, thresholds, hills, roadways, or pools.
  • To avoid burns, keep child away from hot liquids, stoves, radiators, space heaters, fireplaces, etc.
  • Discontinue using this walker should it become damaged or broken.
  • Never carry this walker with child in it. Never adjust seat while child is in product.
  • DO NOT lift or carry by tray or toys.
  • DO NOT use this walker until baby can sit up unassisted.
  • To reduce the chance of child slipping out of seat, check that both feet of child touch the floor.
  • Discontinue use of activity walker (seated stage) if child can climb out or walk unassisted.

Only use this activity walker (seated stage) if your child MEETS ALL of the requirements below:

1. Can support body weight with legs
2. Weight is between 15 and 26 pounds (6.8 and 11.8 kgs)
3. Height is less than 32 inches (80 cms)

To maintain stopping performance, clean friction strips regularly with damp cloth.

FCC

FCC Statement (United States Only)
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or experienced radio / TV technician for help.

Note: Changes or modifications not expressively approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Parts List

HOW TO ASSEMBLE YOUR WALKER

1. To unfold walker, pull up sharply on the tray. Raise upward.
2. Rotate top tray forward.
3. Insert the front leg into the slot in the base. Press down on the top tray until the front leg button locks into the base.

Attach Seat Pad

1. Place seat pad into seat ring located on tray. Align it so that high back support aligns with back of walker ring.
2. Insert the 4 tabs on the seat pad into slots located around the front of the seat ring. Slide tabs through holes.
3. Underneath the tray, pull tabs and align into grooves.
   Snap the back of the seat pad around the rear of the seat ring.
   Test: Push down hard on seating area of seat pad to make sure seat is securely in place.
   CAUTION: Do not use walker if all tabs and snaps are not secured properly, otherwise child may fall through walker.

Attach Rear Wheels

1. Flip base over to expose underside. Locate rear wheel opening in base of the walker.
2. Align holes of wheel with corresponding axle holes on the base of the walker. Plastic tab may need to be pushed to the side to expose the axle hole. The stem of the wheel should be facing the inside of the base.
3. Slide metal axle into holes until the head of it passes the plastic tab and clicks into place.
4. Repeat for other wheel.

Attach Front Casters

1. Turn the base over and insert the stem of one of the front casters into the hole in one of the front corners. Push firmly until the caster snaps (locks) into place.
   CAUTION: Be sure the caster is inserted fully into the base. The top lip of the caster threads should be flush with the base hole. Nothing below this lip should be visible.

To Assemble Electronic Play Tray

1. Insert the Toy Arch into the Electronic Play Tray Base.

To Install Batteries in electronic play tray (select models)

1. Requires 2 “AA” batteries (Not Included). To insert batteries, use a Phillips head screwdriver to unfasten battery cover. Insert batteries as shown. Secure battery cover.
   CAUTION: Old and new batteries (alkaline, standard or rechargeable) should not be mixed. Different type batteries should not be mixed. Remove batteries before storing the toy.

2. This toy has 2 levels of volume. Move switch to the middle position for low volume and to the far right for high volume. To turn off, move switch to “O” position.

To Attach Electronic Play Tray (select models)
WARNING: Do Not lift walker by toys or tray.

1. Insert the electronic toy bolts into the tray openings as shown.
2. To secure the electronic toy, flip tray over and tighten each small nut until they are against the tray.
   CAUTION: Toys intended to be assembled by adult!

To Convert to Walk-Behind Walker
As your child grows, your Tiny Steps® Walker can be converted to a Walk- Behind Walker.

1. Remove the seat pad by unfastening the 4 seat tabs from the tray and unsnapping the rear of the seat pad.
2. Rotate the rear of the seat ring forward until it locks into place, to become the Walk-Behind handle. Your child can now stand behind the walker.

To Adjust Seat Pad Height

WARNING
DO NOT disassemble or adjust height while baby is sitting in or near product. Always make sure seat pad is adjusted to the correct height position before placing child in product.

NOTE: As your child begins to grow, adjust height of walker via the seat pad so that their feet touch the ground when seated. To determine correct height after assembly, place child in walker and make sure both feet touch the ground.
CAUTION: Child should not be in the walker during adjustment.

1. After seat pad is attached to tray, flip unit upside down to access the restraint strap on underside of seat pad.
2. Please note, to ensure proper operation, you will need to periodically adjust the seat restraint to accommodate your childs increased height. For smaller babies, seat pad should be extended to its lowest position. To adjust seat height, push button in on restraint strap to release restraint.
3. As baby grows, raise seat by tightening belt. This helps to prevent the child from placing their feet flat on ground and prevents your child from climbing out.

To Fold Walker
The walker folds easily for travel & storage.

1. Release the front leg from the base by pressing the leg release button and pulling up firmly on the front leg.
   NOTE: If in walk-behind mode, rotate the handle back to the original (activity walker) position before folding.

2. Fold the front leg under the tray until it locks onto the tray itself.

3. Rotate the tray down and to the rear of the walker.

CARE & MAINTENANCE

1. Wipe plastic parts with a damp cloth using mild soap.
2. Machine wash the seat pad in cold water in a gentle cycle. Do not use harsh detergents or bleach. Do not dry clean.
3. Air or line dry.

NOTE:: To maintain stopping performance, clean friction strips regularly with a damp cloth.

LIMITED WARRANTY

owned and licensed by Sesame Workshop. © 2012 Sesame Workshop. All rights reserved. Kolcraft® warrants this product to be free of defects in materials and workmanship, as follows: For ONE YEAR from the date of purchase, Kolcraft will repair or replace, at its option, the defective product. If you have a problem or are not satisfied with this product, please contact the Consumer Service Department at Kolcraft.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER. KOLCRAFT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT TO THE EXTENT REQUIRED BY APPLICABLE LAW. ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE DURATION OF THIS WARRANTY.
Some states do not allow the exclusion or limitation of warranties set forth above, so the above exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. We sincerely thank you for your purchase of this Kolcraft product. To obtain warranty service, please call kolcraft’s Consumer Service Department at 1-800-453-7673 in U.S. and Canada, 1-910-944-9345 outside U.S. and Canada or contact us via email at customers-
vice@kolcraft.com.
If the product is returned to Kolcraft’s Consumer Service Department for repair or replacement, it must be shipped prepaid and adequately insured.
For further information visit www.kolcraft.com.
RECALL WEBSITE: HELP KEEP YOUR CHILD SAFE. Check www.recall.gov to see if any products you use with your child or any of your child’s toys have been recalled.

PERSONAL RECORD CARD

Once in a while, we are less than perfect and one of our products with a problem reaches a customer. In most cases, we can solve your problem with replacement parts. Please contact us before you return one of our products to the store. Once a product is returned, it cannot be resold. The materials and the energy used to make it are wasted.
Please fill in the information in the space provided and attach a copy of your purchase receipt. You will need this information to obtain warranty service.
You will need this information to obtain warranty service. You can find Model Number and Date of Manufacture on a sticker located underneath the base ring.

Please direct any comments, questions or replacement part requests to:
Kolcraft® Enterprises, Inc. Consumer Service Department
10832 NC Highway 211East
Aberdeen, NC 28315
1-800-453-7673 in U.S. & Canada, 1-910-944-9345 outside U.S. & Canada
Eastern Standard Time, 8 am-6:45 pm Monday – Thursday, 8 am-3:30 pm Friday
1-800-453-7673 en los Estados Unidos y en Canada, 1-910-944-9345 fuera de los Estados Unidos y Canada tiempo estándar del este, 8 am-6:45 pm Lunes – Jueves, 8 am-3:30 pm Viernes
fax: 910-944-3490
e-mail: customerservice@kolcraft.com

• Model / Style Number:_____
• Date of Manufacture: __
• Date of Purchase: _____

Turn to page 17 to see a list of replacement parts and for ordering information

REPLACEMENT PARTS LIST

• TO ORDER PARRTTSS::

  • 1-800-453-7673 in U.S.A. & Canada
    1- 910-944-9345 outside U.S.A. & Canada

  • Visit “Order Replacement Parts” page on www.kolcraft.com

  • Email customerservice@kolcraft.com

Consumer Service: 1.800.453.7673 www.kolcraft.com/sesamestreet

©2012 Kolcraft® Enterprises, Inc. All Rights Reserved. W025-R2 11/11

References

• Baby Products | Crib Mattresses | Strollers | Kolcraft
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>