LG MCV904 Sound Subwoofer Instruction Manual

: June 16, 2024
: LG

Table of Contents

LG MCV904 Sound Subwoofer
Product Information
Product Usage Instructions
Safety Precaution
Setting up
Main Unit
About Remote control
Listening to CDs
Listening to the radio
Using a USB device
Setting the Clock
Troubleshooting
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LG MCV904 Sound Subwoofer

LG-MCV904-Sound-Subwoofer-product

Product Information

Specifications

Model: MCV904
Submodels: MCV904-A0P, MCV904-A0U, MCS904F, MCS904S, MCS904W, MCS904AW
Trademark: iPhone is a trademark of Apple Inc. iPod is a trademark of Apple Computer, Inc., registered in the U.S. and other countries.
Website: https://manual-hub.com/

Product Usage Instructions

Setting up

To set up the product, follow these steps:

Connect the FM and AM aerials to the designated ports on the unit.
If using a subwoofer (MCV904 or MCT704), press the SUB WOOFER button on the unit repeatedly to toggle between SUB_WOOFER ON and SUB_WOOFER OFF.
Connect external devices to the AUDIO OUT port to enjoy music.
Connect the front speakers, surround speakers, and subwoofer cables to their respective terminals.

Listening to CDs

To listen to CDs, please follow these steps:

Insert a CD into the CD player.
Use the remote control or buttons on the unit to select the desired track or control playback (such as play, pause, stop, etc.).

Listening to the radio

To listen to the radio, please follow these steps:

Press the RADIO button on the unit or remote control to switch to radio mode.
Use the tuning buttons or the remote control to search for and select the desired radio station.

Listening to cassette tapes

To listen to cassette tapes, please follow these steps:

Insert a cassette tape into the cassette player.
Use the playback controls on the unit or remote control to control the playback of the cassette tape (such as play, pause, stop, rewind, forward, etc.).

Using a USB device

To use a USB device, please follow these steps:

Connect a USB device to the USB port on the unit.
Use the remote control or buttons on the unit to navigate and select the desired files or folders on the USB device.
Use the playback controls to control the playback of the selected files (such as play, pause, stop, skip, etc.).

Listening to music from your portable player or external device

To listen to music from a portable player or external device, please follow these steps:

Connect your portable player or external device to the designated input port on the unit.
Use the remote control or buttons on the unit to select the corresponding input source.
Control the playback of the connected device using its own controls.

Enjoying a pre-programmed sound field

To enjoy a pre-programmed sound field, please follow these steps:

Use the remote control or buttons on the unit to select the desired pre-programmed sound field.
Adjust the volume and other sound settings as desired.

PRO EQ

To adjust the PRO EQ settings, please follow these steps:

Use the PRO EQ button on the unit or remote control to access the PRO EQ menu.
Use the navigation buttons or remote control to select and adjust the desired equalizer settings.
Save the changes if applicable.

Synchronized Recording from CD to Tape

To synchronize record from CD to Tape, please follow these steps:

Insert a blank cassette tape into the cassette player.
Play the desired CD track.
Press the RECORD button on the cassette player to start recording.
Stop recording when desired.

Recording to TAPE

To record to tape, please follow these steps:

Insert a blank cassette tape into the cassette player.
Play the desired audio source (CD, radio, USB, etc.).
Press the RECORD button on the cassette player to start recording.
Stop recording when desired.

Recording to USB

To record to a USB device, please follow these steps:

Connect a USB device to the USB port on the unit.
Play the desired audio source (CD, radio, cassette tape, etc.).
Press the RECORD button on the unit to start recording.
Stop recording when desired.

Setting the Clock

To set the clock, please follow these steps:

Press the CLOCK button on the unit or remote control.
Use the navigation buttons or remote control to set the desired time.
Save the changes if applicable.

Using an iPod (optional)

If you have an iPod (optional), you can use it with the product. Please refer to the iPod’s user manual for instructions on how to connect and use it with the product.

Troubleshooting

If you experience any issues with the product, please refer to the troubleshooting section in the instruction booklet for possible solutions.

FAQ

Q: Can I make unauthorized copies of copy-protected material?
A: No, making unauthorized copies of copy-protected material may be an infringement of copyrights and constitute a criminal offense. This product should not be used for such purposes.
Q: Should I respect copyrights?
A: Yes, it is important to respect copyrights and only use this product for legal and authorized purposes.
Q: Where can I find more information or support?
A: For more information or support, please refer to the instruction booklet or visit the website https://manual-hub.com/.

MCV904 (MCV904-A0P/A0U MCS904F, MCS904S, MCS904W/ AW)
MCT704 (MCT704-A0P/A0U MCS704F, MCS704W)
MCD504 (MCD504-A0P/A0U, MCS504F)

As an ENERGY STAR® Partner, LG has determined that this product or product models meet the ENERGY STAR® guidelines for energy efficiency.
ENERGY STAR® is a U.S. registered mark.
iPhone is a trademark of Apple Inc
iPod is a trademark of Apple Computer, Inc, registered in the U.S. and other countries.

Safety Precaution

CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
WARNING : Do not install this equipment in a confined space such as a book case or similar unit.
CAUTION : Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings be never be blocked by placing the product on a bed, sofa, rug or other similar surface. Thisproduct not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instruction has been adhered to.
CAUTION : This product employs a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. If the unit requires maintenance, contact an authorized service center. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure.
To prevent direct exposure to the laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM.
CAUTION : The apparatus not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, be placed on the apparatus.
CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit
That is, a single outlet circuit that powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner’s manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire.
Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer.
Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.
To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible

Put the battery into the remote control
Make sure for the + (plus) and – (minus) on the battery to be matched on the remote control. (size AAA)

The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offense. This equipment should not be used for such purposes.

Be responsible
Respect copyrights

Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely.

Setting up

Using the subwoofer You can use the sound of the subwoofer to enhance the bass. Press “SUB WOOFER” on the unit repeatedly, the display changes in the following order, SUB_WOOFER ON-SUB_WOOFER OFF $LG-MCV904-Sound-Subwoofer-fig- $3$$

Connection of the front speakers
Connect the speaker cables to the front speaker terminals.
Connect the black end of each wire to the terminals marked – (minus) and the other end to the terminals marked + (plus).
Connection of the surround speakers
Connect the speaker cables to the surround speaker terminals.
Connection of the subwoofer
Connect the subwoofer(A) cables to the subwoofer terminals.
Connect the subwoofer(B) speaker cables to the subwoofer(A) speaker terminals.
Fit the AM loop aerial to its stand Connect the AM loop aerial to the unit.
Connect the FM aerial
The reception will be at its best when the two loose ends of the aerial are in a straight line and horizontal.
Plug the power plug into a wall socket

NOTES:

If TV screen becomes discolored do not place speakers within 30cm of TV.
Be sure to match the speaker cord to the appropriate terminal on the components: + to + and – to –. If the cords are reversed, the sound will be distorted and will lack base.

Be careful of the following
Be careful to make sure children not to put their hands or any objects into the

speaker duct.
speaker duct: A hole for plentiful bass sound on the speaker cabinet(enclosure).

Main Unit

$LG-MCV904-Sound-Subwoofer-fig- $4$$

POWER on/off POWER SAVE MODE
Choose a desired CD
DISPLAY WINDOW
OPEN / CLOSE
R (REC) (USB REC/ TAPE REC)
XDSS
Extreme Dynamic Sound System Reinforce the treble, bass, and surround effects.
MP3 OPT.
Optimizes compressible MP3 files so that it improves the bass sound.
PRO EQ
To select the TUNER function
VOCAL FADER
When you listen to music, it reduces the vocal of file.
You can select the USB (iPod) function.
PORTABLE
The unit can be used to play music from many types of portable players. AUX
You can connect many other types of audio or audiovisual devices to the system via the auxiliary sockets (AUX IN) on the back of the unit.
CLOCK
For setting the clock and checking the time.
TIMER
With the TIMER function, you can turn CD, tape, USB play, and TUNER reception on or off at a desired time.
You can select the CD function.
CD/ TAPE Synchronized Recording Starts playback/ Clock setting/ CD pause
You can select the TAPE function.
Stops playback or recording
MIC VOL.
Adjusts the microphone volume by turning MIC VOL.
MIC
You can sing to a music source by connecting a microphone (not supplied) to the unit.
PORT. IN
For connecting a portable device and playing it through the system’s speakers.
USB port
Connect a USB compatible device here.
Cassette door
LG EQ/ DEMO
SUB WOOFER (Optional)/ AM NOISE
PRESET + (CD PLAY, TAPE FWD PLAY) PRESET – (TAPE RVS PLAY)
VOLUME
Controls the volume when using any function.
TUNING (+) (CD Next/ TAPE FF) TUNING (-) (CD Prev/ TAPE REW)
PRO EQ
Controls sound register
(Low→BASS (100 Hz),
Middle→Middle (1 KHz),
Highe→TREBLE (10 KHz))

About Remote control

$LG-MCV904-Sound-Subwoofer-fig- $5$$

Listening to CDs

	ON UNIT	ON REMOTE
1. Open the CD door	OPEN / CLOSE	–
2. Select the CD tray	DISC SKIP	D.SKIP
3. Insert the CD: Label facing up.	–	–
4. Close the CD door	OPEN / CLOSE	–

5. Select the CD function

The display will show the total number of tracks (files).

Audio CD and MP3/ WMA CD can be played back in this unit.

Listening to CDs – More you can do
Pausing or restarting a CD

Press CD PAUSE on the unit or on the remote control during playback.
Press this button again to resume play.

Searching for a section within a track
Hold on the unit or on the remote control during playback and release it at the point you want to listen to.

Skipping to another track (files)
Press on the unit or on the remote control in stop status.

Program list

You can play up to 20 tracks on a CD in order.

Insert a CD and wait for it to be read.
Press PROGRAM/MEMO. on the remote control in stop status.
Press on the unit or on the remote control to select a track.
Press PROGRAM/MEMO. again to save and select a next track.
Press on the unit or on the remote control to play the programmed music files.
To clear your selection, press STOP (or (ENTER)), PROGRAM/MEMO. and then STOP (or (ENTER)).

Listening to your tracks (files) repeatedly or randomly

Press REPEAT/RANDOM(MENU) repeatedly. The current (tracks) file will be played back repeatedly or randomly.
To return to normal playback, press REPEAT/RANDOM(MENU) repeatedly to select [Off].

Listening to the radio

Make sure both the FM and AM aerials are connected

	ON UNIT	ON REMOTE
1. Select either FM or AM	TUNER	FUNCTION
2. Select the radio station	TUNING (+)/ (-)	TUN.- / TUN.+
3. To ‘save’ a radio station: A preset number will show in the display.
–	PROGRAM/MEMO.
4. Select the preset number	PRESET(-)/ (+)	FOLDER •

PRESET
5. To confirm press: Up to 50 radio stations can be saved.| –| PROGRAM/MEMO.
6. To select a ‘saved’ station| PRESET(-)/ (+)| FOLDER • PRESET

Listening to the radio – More you can do
Looking for radio stations automatically

Press and hold TUNING + / TUNING – on the unit or TUN.- / TUN.+ on the remote control for more than 0.5 second.
The tuner will scan automatically and stop when it finds a radio station.

Deleting all the saved stations

Press and hold PROGRAM/MEMO. on the remote control for two seconds. “ERASE ALL” shows.
Press PROGRAM/MEMO. on the remote control to erase all the saved stations.

Improving poor AM reception
When receiving the AM broadcast, beat noises may occur. Press AM NOISE repeatedly, and the display changes in the following order, AM NOISE ON →AM NOISE OFF.

Improving poor FM reception
Press (MONO/ST) on the remote control. This will change the tuner from stereo to mono and usually improve the reception.

About MP3/ WMA
MP3/WMA Disc compatibility with this unit is limited as follows:

Sampling Frequency: 8 – 48 kHz (MP3), 32 – 48 kHz (WMA)
Bit rate: 8 – 320 kbps (MP3), 48 – 320 kbps (WMA)
CD-R physical format should be “ISO 9660”
If you record MP3/WMA files using software that cannot create a FILE SYSTEM, for example, “Direct-CD” etc., it is impossible to playback MP3 files.
We recommend that you use “Easy-CD Creator”, which creates an ISO 9660 file system.
Do not use special letters such as “/ : *? “ < >” etc.
Even if the total number of files on the disc is more than 1000, it will only show up to 999.

Listening to cassette tapes
Cassette tapes can be played back in this unit.

	ON UNIT	ON REMOTE
1. Open the tape door	PUSH EJECT	–
2. Insert the tape	–	–
3. Close the tape door	PUSH EJECT	–
4. Select the TAPE function	TAPE	FUNCTION
5. Start the tape playing	or
6. To stop a tape playing	STOP	(ENTER)

Listen to cassette tapes – More you can do
Playing Fast Backward or Forward
Press on the unit during playback, or stop, and press at a point you want.

RVS MODE (Reverse Mode)
You can set the tape to play one side, both sides one time or both sides, , by pressing REPEAT/RANDOM(MENU) on the remote control one or more times.

Using a USB device

	ON UNIT	ON REMOTE
1. Connect the USB device to the USB port of the unit.	–	–
2. Select the USB function.	USB	FUNCTION
3. Select a file you want to play.	–	–
4. Start your media playing.
5. To stop, press	STOP	(ENTER)

6. Before disconnecting the portable USB device, change to any other function.| (CD,TUNER, …)| FUNCTION

You can enjoy media files saved on a USB device by connecting the USB device to the USB port of the unit.
If you want to operate other functions, see the CD playback section.

Compatible USB Devices

MP3 Player: Flash-type MP3 player.
USB Flash Drive: Devices that support USB 2.0 or USB 1.1.
The USB function may not be available depending on the devices. USB device requirement
Devices that require additional program installation when you have connected it to a computer, are not supported.

Look out for the following

Do not extract the USB device while in operation.
For a large-capacity USB, it may take longer than a few minutes to be searched.
To prevent data loss, back up all data.
If you use a USB extension cable or USB hub, the USB device is not recognized.
Using the NTFS file system is not supported. (Only the FAT(16/ 32) file system is supported.
This unit is not supported when the total number of files is 1,000 or more.
External HDD, Locked devices or hard type USB devices are not supported.
The USB port of the unit can not be connected to the PC. This unit can not be used as a storage device.

Listening to music from your portable player or external device

The unit can be used to play the music from many types of portable player or external device

	ON UNIT	ON REMOTE

1. Connect the portable player to the PORT.IN(PORTABLE. IN) connector of the unit.

Or

Connect the external device to the

AUX IN connector of the unit.

If your TV has only one output for audio(MONO). connect it to the left(white) audio jack on the unit.

$LG-MCV904-Sound-Subwoofer-fig- $13$$

Main unit VCR, TV, …

| ****

–

| ****

–

Enjoying a pre-programmed sound field

This system has a number of pre-set surround sound fields. You can select a desired sound mode by using LG EQ/DEMO.
The displayed items for the Equalizer may be different depending on sound sources and effects.

ON DISPLAY	Description
NATURAL	You can enjoy comfortable and natural sound.

Local

Specialization equalizer

| Regionally optimized sound effect.(DANGDUT/ ARABIC/

PERSIAN/ INDIA/ REGUETON/ MERENGUE/ SALSA/ SAMBA)

AUTO EQ| Realizes the sound equalizer that is the most similar to the

genre of which is included in the MP3 ID3 tag of song files.

PRO EQ| The program can adjust the bass (100 Hz),

middle (1 KHz) and treble (10 KHz).

POP CLASSIC ROCK

JAZZ

| This program lends an enthusiastic atmosphere to the sound, giving you the feeling you are at an actual rock

, pop, jazz or classic concert.

MP3 OPT| This function is optimized for compressible MP3 file. It

improves the bass sound.

XDSS| Reinforce the treble, bass and surround sound effect.
VIRTUAL| You can enjoy moe virtual surround sound.
NORMAL(OFF)| You can enjoy the sound without equalizer effect.

PRO EQ
You can listen to music with the desired sound effect (BASS (100 Hz), MIDDLE (1 KHz) and TREBLE (10 KHz)).

	ON UNIT
1. Select “PRO EQ”	PRO EQ

2. When “PRO EQ” is displayed, press

The “[USER]” icon is displased.

| SET
3. Select the sound effect you want among BASS, MIDDLE or TREBLE: Rotate the sound effect dial – BASS (100 Hz), MIDDLE (1 KHz) or

TREBLE (10 KHz) to adjust sound level

| BASS (100 Hz),

MIDDLE (1 KHz)

and TREBLE (10 KHz)

4. Press| SET

VOCAL FADER

You can enjoy the function as karaoke, by reducing singer vocal of music in the various source.
Press the VOCAL FADER, and “FADE ON” will appear in display window.
To cancel it, press VOCAL FADER again.

Synchronized Recording from CD to Tape

	ON UNIT	ON REMOTE
1. Open the tape deck and then insert a blank tape.	PUSH EJECT

–
2. Close the door and insert a CD.| ** PUSH EJECT| –
3. To select CD function, press| CD| FUNCTION
4. Press the button on a stop status to move to CD synchronizing mode.** Recording automatically starts

7 seconds later after “REC” blinks.

| CD SYNC| –
5. To stop, press| STOP| **(ENTER)**

Recording to TAPE
You can record a various sound source to TAPE

	ON UNIT	ON REMOTE
1. Open the tape deck.	PUSH EJECT	–
2. Insert a blank tape and close the door.	–	–
3. Select a mode in which you want to record.	(CD,TUNER, …)

FUNCTION
4. Play back a sound source first.| |
5. Press

The display changed in the following order, “USB REC” <-> “TAPE REC”

Recording to USB
You can record a various sound source to USB.

	ON UNIT	ON REMOTE
1. Connect the USB device to the unit.	–	–

2. Select a mode in which you want to record.

Play back a sound source first.

| (CD,TUNER, …)| FUNCTION
3. Press

The display changed in the following order.

“USB REC” <-> “TAPE REC”

| R (REC)| REC
4. Press the button once more when “USB REC” is displayed.

Rcording starts.

| R (REC)| REC
5. To stop recording, press| STOP| **(ENTER)**

Recording to USB – More you can do Recording Music file in a disc source to a USB
One track recording – If the USB recording is started during the playback of the CD, the one track/ file would be recorded into the USB.
All tracks recording – If the recording button is pressed at the CD stop, all tracks/ files will be recorded.
Program list recording USB records after creating your own program if you want to record the track you want. Up to 20 songs can be recorded.
Pausing recording During recording, press R ( REC) to pause recording. Press R ( REC) to continue recording. (Only Radio/ Portable/ AUX)

To select recording bit rate and speed

Press R (REC) on the player or ****REC on the remote control for longer than 3 seconds.
Use on the player or on the remote control to select the bit rate.
Press R (REC) or ****REC again to select the recording speed.
Use or to select a desired recording speed.
X 1 SPEED (96kbps, 128kbps, 192kbps, 256kbps)
You can listen to music while recording it. (Audio CD Only)
X 2 SPEED (96kbps, 128kbps)
You can just record the music file. (Audio CD Only)
Press R (REC) or ****REC to finish the setting.

When you are recording, look out for the following

You can check the recording percentage rate for the USB record on the screen during the recording. (MP3/ WMA CD only)
During recording MP3/ WMA, there is no sound.
When you stop recording during playback, the file that has been recorded at that time will be stored.(Audio CD only)
Do not remove the USB device or turn off the unit during USB recording. If not, an incomplete file may be made and not deleted on PC.
Recording through microphones is not available.
If USB recording does not work, message like “NO USB”, “ERROR”, “USB FULL” or “NO REC” is displayed on the display window.
For the discs recorded in the format of DTS disc, USB recording is not supported.
Multi card reader device or External HDD can not be used for USB recording.
A file is recorded by 128Mbyte when you record for a long term.
When you stop recording during playback, the file will not be stored.
In the state CD-G, the DTS disc USB record is not operated.
You may not record more than 999 files.
It’ll be stored as follows.

$LG-MCV904-Sound-Subwoofer-fig- $17$$

Setting the Clock

1. Press for at least 2 seconds

| ON UNIT

CLOCK

---|---
2. Choose from either AM 12:00 (for an am and pm display) or 0:00 (for a 24 hour display).|
3. Confirm your selection| SET
4. Select the hours|
5. Press| SET
6. Select the minutes|
7. Press| SET

Use your player as an alarm clock

Press and hold TIMER. Each function, EX) TUNER, CD…. flashes.
Press SET when the function you want to be woken by is showing. If you choose TUNER, “PLAY” and Then “REC” flashes in the display window alternately.
Choose one of them by pressing SET.
“ON TIME” will be displayed. Then you can set the time you want the alarm to go on. Press to change the hours and minutes and SET to save.
“OFF TIME” will be displayed. Then, you can set the time you want the function to stop. Press to change the hours and minutes and press SET to save.
You will be shown the volume (VOL) you want to be woken by. Use to change the volume and SET to save. Switch the system off. The clock icon “ ”shows that the alarm is set.
When the system is turned off, you can check the time the alarm is set for by pressing TIMER. You can also turn the alarm on and off by pressing TIMER.

Fall asleep while listening to your player

Press SLEEP repeatedly to select a delay time between 10 and 180 minutes, after the unit is turned off.
To check the remaining time, press SLEEP.

DEMO

Press LG EQ/DEMO in power off state to demonstrate the function on the display window.
To cancel it, press or this button again

DIMMER

Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off and the display window will be darkened by half. To cancel it, press SLEEP repeatedly until dim off.

Using an iPod (optional) $LG-MCV904-Sound-Subwoofer-fig- $19$$

For details refer to iPod guide.
The advantage of connecting your iPod through the system’s USB port is that the iPod can be controlled from the system. LG-MCV904-Sound-Subwoofer-fig-
20

Listening to music from your iPod.

Operate the iPod by using the unit or the remote control after being connected to the unit. When connected, the unit operates as the connected iPod does and the states like FOLDER •PRESET are changed by the iPod setting.
For the “iPod Touch” model, the explanation of some functions may not be applicable.

Using the remote control

ON UNIT	ON REMOTE	Operations
	Pause or restart
	Skip or Search
–	REPEAT/MENU

(RANDOM)

Compatible iPod

We recommend installing the latest software version.
The unit support the models as follows iPod nano 1G, 2G, 3G, 4G/ iPod classic/ iPod 4G, 5G/ iPod touch 2G/ iPhone 3G. For some models, the unit may not operate depending on the firmware version.
Depending on your iPod’s software version, it may not be possible to control your iPod from the player.
Unsupported iPod models are recognized as an USB device when connected.

Display information
Press INFO on the remote control repeatedly, the display changes in the following order, Title → Artist → Album → Time information. When “artist/ Album” does not exist on the connected iPod, “No artist” or “No Album” is displayed on screen.

NOTES :

It may take from about 5 to 150 seconds for the unit to search the iPod information and authentication after being connected.
It is recommended not to change to other functions when “IPOD READY” is on.
It is recommended not to connect or disconnect iPod when “IPOD READY” is on.
Make sure to operate the device after “PLAYLISTS” is displayed on screen.
iPod does not support recording function when connected.
Unsupported texts are displayed like “-”.

Troubleshooting

	Symptom	Cause	Correction

General

Remote control

| The remote control does not work properly.| The remote control is too far from the unit.| Operate the remote control within about 23 ft (7 m).
There is an obstacle in the path of the remote control and the unit.| Remove the obstacle.
The battery in the remote control is exhausted.| Replace the battery with new one.
ipod| iPod does not work.| Check whether the player is connected to the unit correctly.| Connect it to the unit correctly.

POWER SAVE MODE
Press on the player or 1 on the remote control for longer than 3 seconds as the device is powered on, you can move into POWER SAVE MODE. Press again to cancel.
Designs and specifications are subject to change without notice.