omega OS-820D Non Contact Infrared Thermometer User Manual
- June 16, 2024
- Omega
Table of Contents
Non-contact Infrared Thermometer
OS-820D
User Manual
Features:
- Two measurement modes: Human body temperature and object surface temperature
- Data storage up to 34 temperature records
- 3-color alarm backlight display: green, orange and red
Product Introduction:
This product is a handheld non-contact infrared thermometer, with two possible measurement modes: human body temperature measurement and object surface temperature measurement modes. It features: temperature data storage up to 34 records, high temperature alarming, temperature range indication based on different backlighting color, and auto shut-off.
Product Description:
- LCD Display: indicate measured temperature
- Backlight/Laser button: turn on/off backlight or laser
- Left Button: during the measurement mode, page up the stored temperature data records; Activate the parameter setting mode; Or during the parameter setting mode, navigate the settings menu
- Right Button: during the measurement mode, page down the stored temperature data records; or during the parameter setting mode, adjust parameters.
- Mode button: switch between measurement modes or switch between English and Chinese display.
- Laser pointer
- IR sensor: point to the measuring object during measurement
- Trigger: start measurement
- Battery cover: open to change battery
Product Information:
| Product Storage Temperature | -10-60°C (14-140°F) |
|---|---|
| Application Ambient Temperature | 10-40°C (50-104°F) |
| Battery Voltage | 9V |
| Product Weight | 122g |
| Product Dimension | 145 x 50 x 40 mm |
Technical Specification:
| Human Body Temperature Measurement Range | 32-43°C (90-109°F) |
|---|---|
| Human Body Temperature Measurement Accuracy | ±0.4°C (±0.7°F) |
| Object Surface Temperature Measurement Range | 0-100°C (32-212°F) |
| Object Surface Temperature Measurement Accuracy | ±1°C (±1.8°F) |
| Resolution | 0.1°C (0.1°F) |
| Response Time | 0.5s |
| Distance to Measuring object | 5-15cm |
| Auto shut-off | 7s |
Function Settings: Press «SET (left button) twice to enter the parameter
setting mode. A “F1” symbol will show at button right corner. Press »ADJ
(right button) button once to adjust settings. Press «SET (left button) to
navigate between the following settings menu: Unit → Temperature Shift→Audio
On/off→ Exit Setting Menu.
Unit setting:
With F1 Symbol showing in bottom right corner of the display, press »ADJ to
switch between ⁰C and ⁰F. Audio ON/OFF Setting
With F3 Symbol showing in bottom right cornerof the display, press »ADJ to
turn on/off audio.
During the parameter setting mode, press the trigger to directly exit from the
setting mode.
Temperature Shift Setting With F2 Symbol showing in bottom right corner
of the display, press »ADJ (to increase) and MODE (to decrease) to adjust the
temperature shift within the range of ±5 ⁰C ( ±9⁰F).
Mode Switch
Press MODE button twice to switch between Chinese and English display
language. Press MODE button once to switch between Human Body temperature
measurement and surface temperature measurement modes.
Temperature Measurement
Point to the measuring object. Press the trigger to begin the measurement.
The display screen will display the temperature immediately within the
response time.
Body temperature measurement mode: Press the trigger button once to take
one measurement. The number on the button left corner shows the record number.
The backlight color indicates the different temperature range as follows:
| Green: | Below 37.5⁰C(99.5⁰F) |
|---|---|
| Orange: | 37.5⁰C-38⁰C(99.5-100.4⁰F) |
| Red: | Above 38⁰C(100.4⁰F) |
Surface temperature measurement mode:
Keeping the trigger pressed, the display will indicate the object surface
temperature live with green backlight. Data Record Management:
View Data Record
Press «SET (left button) and »ADJ (right button) to page up and down among the
data records.
Delete Data Record
Press »ADJ (right button) twice to delete the current data record. If the
audio is on, the device will beep once.
Battery installation and replacement
When the battery is running low, the screen will display a battery symbol at
bottom left corner.
Precautions before first use
- Install batteries before use
- Before first use, warm up the device for about 10 minutes before installing the battery.
- When using it for body temperature measurement point thermometer at the forehead. This is a non-contact thermometer and the suggested measuring distance to the forehead is 5cm (2in). Press the trigger once to take one temperature measurement. Tip: temperature can also be measured at an earlobe.
- When measuring body temperature, please make sure there are no obstacles between the IR sensor and forehead skin, e.g., move hair or sweat if obstructing measurement.
Warnings
- The glass protector in front of the IR sensor is a critical but very fragile element of the device.
- Use cotton and 70% rubbing alcohol for cleaning.
- Please only use qualified battery. Do not charge batteries that are not rechargeable.
- Do not use the thermometer under the sun or under water.
Maintenance
- Please follow the instruction manual for troubleshooting. If the issue is not listed in the manual, please contact our customer support.
- Warning sign “HI”
- When using the thermometer for measuring body temperature, the “HI” warning sign may come on. The warning sign indicates the temperature measured exceeds the maximum allowed threshold 43⁰C (109.4⁰F).
- Warning sign “LO”
- When using the thermometer for measuring body temperature, the “LO” warning sign may come one. The warning sign indicates the temperature measured exceeds the minimum allowed threshold 32⁰C (90⁰F).
CONFIDENTIAL
https://manual-hub.com/
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>