Whee Witness HD PRO Dash Cam Owner’s Manual

Whee Witness HD PRO Dash Cam

Owner’s Manual

Thank you for purchasing the WheelWitness  HD PRO Dash Cam!

We  are  always  here  to  help  so  please  do  not  hesitate  to  let  us know  any  questions or concerns you may have! Your 100% satisfaction is our priority!
If you have any questions please contact us via our website! (http://www.WheelWitness.com)

Product Information

The WheelWitness HD PRO Dash Cam is a high-definition dashboard camera designed for personal use. It features a wide-angle lens, motion sensor function, G-sensor function, and event triggering capabilities. The camera can record videos at a resolution of up to 2304 x 1296P, producing high-quality images. It comes with a memory card slot, DC IN camera power socket, HDMI port, USB port, and GPS port (optional). The camera also has indicator lights for power, recording, and GPS.

Copyright Notice
Please note this product is for personal use only.
The  form  of  usage  should  not  offend  or  infringe  international  or domestic  copyright  laws  and  regulations. All recorded videos should be for personal use only.
Please  note  that  using  this  product  for  recording  occasions  like shows,  exhibitions  or  commercial  activities will infringe others copyrights or legislation rights.

About WheelWitness HD PRO Dashboard Camera

The  HD  PRO  is  designed  to  automatically  turn  ON  when  it  receives power  to  the  DC  IN  port.  It  also  automatically shuts down and records for a few extra seconds using the internal battery when the power is shut off (to avoid any sudden power cuts and possibly corrupting data). Under default settings the camera always cycles or “loops” the memory card so you will always be recording and never run out of space.

The Motion  Sensor function  should  remain  OFF  under  normal  operating conditions. It is intended to be used ONLY when  the  vehicle  is  stationary and  would  interfere  with  normal  camera  operation while driving. Please only  change  the  settings  as  required! The  G sensor function can be used to protect files in the event of an incident, however if you have too many false-positives, or the camera freezes, please make sure to turn it off!

If you have any questions, please contact us!

Setting Up for First Time Use

1. Remove the protection tape from the Fixed Plate and  install  the  Plate on  the  Windshield  Glass.(We recommend cleaning the installation area with rubbing alcohol).

2. Install  memory  Card  into  the  card  slot.  (If you have trouble use a penny to push it in.)

3. Slide the camera to the fixed plate and adjust the vertical and horizontal positions.

4. Connect the power cord into the cigarette lighter socket in your car.

5. Connect  the  power  cord  to  the  DC  IN Camera power socket.

WheelWitness HD PRO Layout

1. Menu Button
2. OK / Manual Record Button
3. Mode / Down Button
4. EV / Up Button
5. Memory Card Slot
6. System Reset Button
7. GPS Port (optional)
8. Red Light Indicator -­‐ Power / Charging

9. Blue Light Indicator -­‐ Recording
10. Green Light Indicator -­‐ GPS (optional)
11. Microphone
12. Wide Angle Lens
13. DC IN -­‐ Power Port
14. HDMI Port (Cable doesn’t included)
15. USB Port
16. Manual Power Button

Display Icons

1. Mode: Video / Photo / Playback
2. External Power connection / Battery
3. Memory Card (x – no card, or defective card)
4. G-­‐Sensor Status (recommended mode – OFF as shown on the picture)
5. Video file lock (“EVENT” function), icon will be active when EVENT is triggered
6. Recording
7. Recording time
8. Microphone OFF/ON
9. GPS Status (turns green with optional GPS Module only)
10. ADAS: Advanced Driver Assistance System
11. Speed Limit: Preset speed limit (with optional GPS Module only)
12. EV: Exposure Value, “+” brighter, “-­‐“ dimmer
13. Video Resolution
14. Length of Video file – 2/5/10 minutes each file
15. Current date / time / speed (speed with optional GPS Module only)

Event Triggering

In case of emergency or for some other reason when you want to save the recorded moment, simply  press  the  “MENU”  button  (#1)  while  camera  is recording.  The  camera  displays  the  “!”  symbol  on  the  LCD  Display and it will save the previous 10 seconds before the press and 20 seconds after. You will find this file in a separate folder in the SD card.
You can also turn the G sensor to ON while driving. If there is an “event” that it senses, it will automatically save that file accordingly as well. Please keep in mind, if the camera has too many false-positive or it starts to freeze, set the G sensor to OFF.

WARNING: FORMATTING THE Memory CARD WILL ERASE ALL THE INFORMATION INCLUDING “READ ONLY” FILES.

Menu Operation

The HD PRO has two menus; Video Setup Menu and General Setup Menu.
Press “MENU” button in STOP position (no red recording symbol on the display) to activate the Menu.
Press “MENU” button again for switch between Video and General Setup MENU.
Use “UP” and “DOWN” button to highlight the desired line and then press “OK” button to enter sub-­‐menu.
Confirm the selection by using the UP and DOWN button to select the item and press “OK” to confirm setting.

Video Setup Menu

Resolution

Video  resolution  can  be  selected  up  to  2304  x  1296P.  Higher resolution  produces  a  higher quality image. The higher the resolution, the higher the file size.
A standard 32GB microSD card will hold approximately 8 hours at the highest resolution mode available.

[Video Resolution]

[2560×1080 30P 21:9] / [2304 x 1296 30P] / [HDR 1920 x 1080 30P] / [1920 x 1080 30P] / [1280 x 720 60P] / [1280 x 720 30P]

Image Quality

Higher Quality – Larger File Size. [S.Fine] / [Fine] / [Normal]

Metering Mode Setting.

Metering Mode refers to the way in which camera determines the exposure. [Average] / [Center] / [Spot]

Light Frequency

Light Frequency (anti flickering)
[Auto] / [60Hz] – USA Standard / [50Hz] – European Standard

Date Stamp

You can select to have the Date & Time “stamped” into the video.
[Date stamp] [ON] / [OFF] Current speed is stamped in [ON] mode when optional GPS Module is present.

ADAS – Advanced Driver Assistance System

[ON] / [OFF] Lane Departure Warning:
If a lane change occurs, a warning picture will warn the driver and the camera will beep.

Low Light Warning System :
Under low-­‐light conditions the camera will remind you to turn on your headlights.

Driver Fatigue Warning System:
The camera device will display a warning picture and warning tone when you have been continuously driving for more than four hours, followed by the same warning every two hours.

Record Time / Loop Setting

Using the Record Time function you can have the camera split the video files into either 2, 5 or 10 minute files. The recording is continuous, but the files are split into smaller chunks so they are easier to work with.
[Loop Setting] [2min] / [5min] / [10 min]

Speed Setting

[unit: M/H] / [unit: KM/H]

Time Zone

Time Zone [-­‐12] / [-­‐11] /…./ [+11] / [+12]

Using the “UP” and “DOWN” buttons (#4 and #5) set proper time zone for your region (ex: New York -­‐5). Press “OK” (#2) button to confirm. Press “MENU” button to exit menu mode.

WARNING: Setting the correct time zone is very important for the GPS to identify the correct location on the MAP!

AE Bias (Automatic Exposure)

Exposure Value, “+” brighter, “-­‐“ dimmer.

Speed Warning Setting (works with GPS module only)

[OFF] / [55M/H] / [65M/H] / [75M/H] /[80KM/H] / [120KM/H]

LED Setting

You can turn off the LED backlight for the buttons. [LED] [On] / [Off].

G-­‐Sensor (Gravity Sensor) (Set to OFF under normal operation)

The G-­‐Sensor is used when the vehicle is stationary or under special application options. When there is a collision or a sudden change in XYZ axis, the G-­‐Sensor determines the direction of the collision  and  records  the event.  It  creates  a  separate  EVENT  folder  and  stores  the  files there.  These files are saved and are not overwritten when the camera files loop.
Adjust the sensitivity parameter of the sensor so that the camera does not automatically lock all the recorded videos.
[G-­‐Sensor] [High] / [Medium] / [Low] / [Off]

Motion Sensor (Set to OFF under normal operation)

Like the G-­‐Sensor, the motion detection function is used when the vehicle is stationary or under special application options. If you have the camera hardwired, you can set the motion detector to  ON,  and  when  a  motion  is visible  in  the  field  of  view,  the  camera  records  the  set  time.  It creates a separate EVENT folder and stores the files there. These files are saved and are not overwritten when the camera files loop.
This function should be turned OFF under normal operation (when driving)!
[Motion detect] [Off] / [On]

General Setup Menu

Language

Use this setting to adjust the menu to your preferred language. [Language] [English] …. [foreign language] Press “OK” Button to process.

System Mode

This setting can be adjusted when you use the AV cable or HDMI cable to connect the camera to your TV (AV and HDMI cables are not included.) (You can use the playback feature to display it on your TV). For USA use NTSC.
[NTSC] / [PAL]

Driver ID / License Plate Setting

You can provide your license plate number or Driver ID here. This number will be stamped into the video at the bottom right corner along with the time and date.

Push “OK” button and use the “UP” and “DOWN” buttons to select the appropriate first letter or digit. Then press “MENU” to go to the next letter or digit. After you setup your plate press ”OK” to save your plate number.
[Ok] [Mode] [Down]

Time Setup

Adjust the current date and time.
[Time Setup] select Year, Month, Day, Hour, Minute -­‐ Press [OK] to save.
Select  year  using  the  MENU  button  and  set  the  year  using  the  UP and  DOWN  button.  Then  select the month using the MENU button and set the current month using the UP and DOWN buttons. Follow the above steps to set the day, hour, and minute and press OK.

Format

This function deletes all data on the memory card including protected data. [No] / [Yes]. Press [Ok] button to format.

Default Setting

This function resets all settings to Factory Defaults. [No] / [Yes]

BackLight Off Setting

[Off] / [1 min] / [3 min] / [5 min]

Beep Sound Setting
ON/OFF function for Power-­‐ON/OFF chime and “beep” with each key press. [On] / [Off]

Version Info

Current firmware version.

Playback

Press MODE Button to select playback mode and Thumbnail View Press DOWN to select video files. OK Button – play Video
Press MENU button – delete file

Connecting to PC

Connect the USB Cable to the USB port of the camera on the side (#15) (NOT DC-­‐IN) and connect the other end of the USB cable to the USB port in your PC/Mac. The red LED on the camera will turn on.
Press Power button (#16) on the recorder – the screen on the will turn blue.
The computer will now show a removable drive that you can browse, just like a flash drive.
Alternatively, you can use the included memory card to USB adapter separately to view/copy the files from the card.

Microphone

You can turn the microphone ON/OFF by holding the OK button while the camera is recording. You should see the icon change on the display.

Hardwiring

Depending  on  your  vehicle  and  where  your  cigarette lighter is located, you can choose to use  the  included  power  adapter,  or  opt  for  our “hardwire” stealth kit.
Some  vehicles  have  a  switched  cigarette  lighter  output, so if you connect it here, the camera always turns on and off with the cars. Other vehicles, such as older German cars have an always-­‐on outlet, so you  either have  to  manually  connect/disconnect  the camera or you can hardwire it.
The  included  power  adapter  is  approximately  12  feet and can be routed around your windshield and down  the  pillar,  under  you  glove  box  and  to the  cigarette lighter outlet for a clean install.

Stealth Hardwiring

If you would like a stealth install that you never have to worry about, we sell a hardwire kit. You can use it to tap into your “Accessory” wire and the camera turns on and off with the vehicle. You never have to remember to turn it on. Using a hardwire kit requires some basic technical skills. Depending on your vehicle, you can route the wires to the back of your cigarette lighter or fuse panel. If wiring to a fuse panel, please use a multi-­‐meter or a test light to find a fuse that is ON when vehicle is in
Accessory/Ignition and is off when vehicle is off.
http://www.amazon.com/dp/B00TGQ1Y3Q/

Amazon: WheelWitness Hardwire Installation Kit

Warranty

We provide free warranty service for parts and labor within ONE YEAR from the date of purchase.
The warranty does not cover:

• Damage caused by accident, misuse, tampering with or failure to follow the care
• Water damage
• Damage and/or scratches to the finish of the case, lens, or LCD display
• Broken bracket and damaged power cable
• Memory card
• Damage caused by repairs or alterations by anyone other than our Service Center

Contact Us

If you have any questions or comments, please feel free to contact us! www.wheelwitness.com/support

Please Drive Safely! -­‐ WheelWitness Inc.

WheelWitness Inc www.wheelwitness.com

FAQ

Q: Can I use the motion sensor function while driving?

A: No, the motion sensor function should remain OFF under normal operating conditions. It is intended to be used ONLY when the vehicle is stationary and would interfere with normal camera operation while driving.

Q: How can I protect files in the event of an incident?

A: You can use the G-sensor function to protect files in the event of an incident. However, if you experience too many false positives or the camera freezes, please make sure to turn off the G-sensor function.

Q: Where can I find more information or contact support?

A: You can visit the WheelWitness website at http://www.WheelWitness.com for more information or to contact support.

References

• WheelWitness HD PRO : Electronics
• The HD PRO - Premier Super HD Dash Cam from - WheelWitness
• Frequently Asked Questions - WheelWitness
• Manual-Hub.com – Free PDF manuals!

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>