Inspiration HT013B001 Tea Helper User Manual

Inspiration HT013B001 Tea Helper User Manual

Product Function description

1. Little assistant
2. Size drawing and function
   

A brief introduction of the equipment and functions

Equipment introduction:

This equipment is a small assistant for tea making, mainly used for making tea with different tastes, can realize the scan order code can display small material varieties, equipped with the scan code gun, horn and other hardware. In order to facilitate your use, please read the instruction manual carefully before use, and use according to the instructions. Due to the improvement of the product, the product you purchased may not be exactly the same as the illustration in the manual.

Technical parameters

Safety test items:

insulation
Input to output| For example: 1600Vac| 3000Vac| 3000Vac| Basic insulation
Input pair housing| | | | Reinforced insulation
Input against the heating disc| | | | Additional insulation
Output pair housing| | | | Functional insulation
Insulation resistance| 210 m or higher Ω| 25A/Imin
Ground resistappey| 0.1 or less| 220V
Leakage current| 0.65 or less mA|

Operation process – Use process

1.  Turn on the power and view the network status icon
2. Click to enter the “Tea Assistant”
3. Scan the order code to display th ingredients

• Small tea helper icon

• Go to the Little Helper software

• Scan the order code

• Click on the top right corner to display tea drink Ingredients
  

• Scan the code to display the order ingredients
  

Installation process

1. Mix AB glue and evenly apply it to the bottom of the stainless steel mounting plate. Press the mounting plate to the stainless smeltable for 1 minute. It takes 30 minutes for the glue to set.
2. Adjust the hex socket screws of the three support joints, and screw the small assistant screen to the top edge of the screen at 1400mm above the ground. When the screwis smooth, the needle is loosened and tightened counterclockwise (function: adjust the tension of the small assistant before and after stretching the joint)
   

Equipment maintenance and maintenance

Equipment maintenance and maintenance system.
In order to ensure that the equipment is often in a good technical state, ensure the safety and stable operation of the equipment, improve the integrity rate of the equipment, extend the service life of the equipment, reduce the operation and maintenance costs of the equipment, combined with the relevant provisions in the instruction manual of various types of equipment, according to the use of the equipment of our company, the mechanical equipment maintenance system is as follows:

1. Special person is responsible for the maintenance of each equipment;
2. The operator should carefully maintain, correctly use the equipment, strictly abide by the operating procedures, and the operating parameters should meet the requirements of the equipment;

Common fault handling abnormal screen

Abnormal Screen

Fault phenomenon: the screen is black, blinks or faih, and does not respond to touch Solution: Restart the power supply of the device, if it is still faulty, please report to the after-sales maintenance (please wait for 1 minute after the power is tumed off during the restart and then tum on the power)

The screen touch fails

Precautions

Precautions

1. if the product has an external adjustable potentiometer, please adjust the current, it is recommended to use 704  silicone will adjust the current The hole is sealed and the waterproof electric box is covered.
2. when the light regulation is not used, please seal the light regulation connector with an insulating sleeve to avoid interfering with the signal guide Cause dimming line damage, affect the normal work of the power supply.

Packaging

• The dimensions of the packing box are (unit: mm): length x width x height = 560360100mm:
• The packing quantity of each box is 1 set;
• Single net weight: 2kg; FCL gross weight: 20 kg:

shipping

Suitable for car, boat, plane transport, transport should be covered, sun protection, civilized loading and unloading

Store

The product shall be stored in accordance with GB 3873-83.The products with a storage period of more than 1 year should be re-inspected before they can be used.

Shenzhen Huiling Technology (Shenzhen) Co., LTD

Huiling-tech Robotic Co., Ltd

Second floor, Building E, Huafeng International Robot Industrial Park, Hangcheng Avenue, Xixiang Street, Baoan District, Shenzhen City, Guangdong Province

Tel: 0755-36382405 Email: hitbot@hitbot.cc Website: www.hitbot.com

FCC Warnning:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

ISED Statement

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B).

This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>