HSLighting E14 Touch Control Table Lamp User Manual

June 16, 2024
HSLighting

HSLighting E14 Touch Control Table Lamp

Specifications

  • Product: Table Lamp
  • Materials: Iron + Linen Fabric
  • Bulb Base: E14 (EU)
  • Max Bulb Power: USB Charging Port If Included – 40W 5V/2.1A, Dual USB Charging Port (Some models without USB Charging Ports)
  • Input Voltage: AC220-240V~50Hz (EU)
  • Operating Temperature: -4 to 122°F (-20 to 50°C)
  • Type of Bulb: LED Dimmer Bulb / Dimmer Bulb
  • Package Quantity: 1 pcs / 2 pcs

IMPORTANT SAFETY INSTRUCTIONS

  1. Do not use the lamp if it is damaged or if the connecting cable shows any kind of visible damage.
  2. This lamp is designed for illumination in a dry indoor room; it is not suitable for use in a damp room, e.g. bathroom.
  3. Keep children away from packaging-risk of suffocation! Keep children away from the lamp, and do not leave them unsupervised with the lamp.
  4. The light will generate heat when it is used. Please keep enough space around it to dissipate heat.
  5. Do not look directly into the light source! Your eyes could be damaged.
  6. Switch OFF the power before installing the bulb. Please make sure the right voltage before working.
  7. Connect the lamp only to the outlet corresponding with the technical data of the lamp.
  8. Before cleaning or if the lamp is not to be used for a long period, unplug the lamp from the main power supply.
  9. A damaged cable must only be repaired at your local electrical store.

Product Parts

Assembly – Example For The Round Table Lamp

  1. Turn the fixed ring on and remove the lampshade.
  2. Turn the lampshade 180 degrees.
  3. Insert the lampshade into the base socket, rotate the fixed ring and fix the lampshade.

Operation

NOTE : Please make sure the voltage is correct before use.
EU: AC220-240V~50Hz

  1. Contact the Lamp holder with your hand or other parts of your body can turn ON/OFF the lamp and adjust the brightness.
  2. First touch: 25-35% brightness;
  3. Second touch: 60-70% brightness;
  4. Third touch: 100% brightness;
  5. Fourth touch: turn OFF.
  6. Please use a matching dimming bulb; otherwise, the dimming function will fail.
  7. Touch function is likely to fail in humid environments or severe electrostatic interference.

Product Parameters

Table Lamp

Materials| Iron + Linen Fabric
Bulb Base| E14(EU)
Max Bulb Power| 40W
USB Charging Port

If Included

| 5V/2.1A, Dual USB Charging Port

(Some models without USB Charging Ports)

Input Voltage| AC220-240V~50Hz(EU)
Operating Temperature| -4℉ to 122℉(-20℃ to 50℃)
Type of Bulb| LED Dimmer Bulb / Dimmer Bulb
Package Quantity| 1 pcs / 2 pcs
What’s in box| Lamp x 1pcs/2pcs, lampshade x 1pcs/2pcs, User Manual x 1pcs.
LED Dimmer Bulb If Included

Base| E14 (EU)
Wattage| 4W
Color Temperature| 2700K
Luminous Flux| 370lm
Type of Bulb| LED Dimmer Bulb
Operating Temperature| -4℉ to 122℉(-20℃ to 50℃)

Troubleshooting

Problem Possible Cause Remedy
No light, Low bright or Flicker. 1. The lamp body is bad.

2. The driver power is bad.

3. The wires are damaged.

| 1. Please contact the vendor for replacement. 2. Please contact the vendor for replacement.

3. Repaired at your local electrical store. 4. Input Voltage: AC

220-240V 50Hz (EU).

5. Operating Temperature: -4℉ to 122℉(-20℃ to 50℃). 6. Clear the lamp of any debris. 7. Avoid installing in strong magnetic accessories. 8. Keep away from damp or electrostatic disturbance.

| 4. Input voltage is incorrect.
| 5. The Operating
| Temperature is incorrect.
| 6. Debris on the lamp.
| 7. Be disturbed.
| 8. Touch failure.

  • WARNING : This lamp is only suitable for use in the dry room; it is not suitable for use in a damp room.
  • NOTES : Do not use the lamp if the wires are damaged

FAQ

Q: What should I do if the lamp does not light up or has low brightness or flickers?
Possible causes and remedies:

  1. The lamp body is bad. – Please contact the vendor for replacement.
  2. The driver’s power is bad. – Please contact the vendor for replacement.
  3. The wires are damaged. – Repaired at your local electrical store.
  4. The input voltage is incorrect. – Input Voltage: AC220-240V~50Hz (EU).
  5. The Operating Temperature is incorrect. – Operating Temperature: -4 to 122°F (-20 to 50°C).
  6. Debris on the lamp. – Clear the lamp of any debris.
  7. Be disturbed. – Avoid installing strong magnetic accessories.
  8. Touch failure. – Keep away from damp or electrostatic disturbance.

Q: Where can I find more information about the EU Declaration of Conformity?
You can download the EU Declaration of Conformity from the following link: EU Declaration of Conformity

UK AR

  • Company Name: KOVA ASSOCIATES LTD
  • Address: 72a Kingston Road, Portsmouth, Hampshire, PO2 7PA, United Kingdom
  • Contact Person : Louisa Timms
  • Email: KOVA.Compliance@outlook.com
  • Tel: 0044(0)23 8097 0315
  • Manufacturer: Shenzhen Howsan Technology Co., Ltd.
  • Address: 2F, Building 78E, Huasheng Industrial Park, Mashantou Industry Area No.4, Guangming District, Shenzhen, China.
  • Email: sales021@hoslight.com

Learn more about the EU Declaration of Conformity, Please click the below link to download. https://book.yunzhan365.com/vrbdu/ufes/mobile/index.html

SHENZHEN HOWSAN TECHNOLOGY CO., LTD.
Printed in China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals