Veeniix V991 Transform Remote Control Car User Manual

User Manual CONTACT US FOR MORE TECH SUPPORT
WhatsApp: +86 18928013876
Mon-Sun 6PM-4AM(PST)
veeniix.com
CONTACT US FOR MORE TECH SUPPORT
WhatsApp: +86 18928013876
Mon-Sun 6PM-4AM(PST)
Mon-Sun 6PM-4AM(PST)
[email protected]

Remote Control Car

1.1 Overview
The remote control car adopts 2.4 GHz frequency band and allows multiplayer to operate without interference in the same band at the same time. Functions such as forward, backward, turn left, turn right, lighting, remote sensing deformation, gesture sensing deformation, and one-key dance demonstration can be achieved by remote controller.

1. Car Light
2. Car Wheel
3. Power On/Off
4. Battery Case

After Deformation 1.2 Packaging List 1.3 Charging

1. Remove the battery of remote control car from battery case.

2. Plug the USB charging cable into 5V2A charger adapter, and the red light will keep steady on when it charges with battery. Please make sure the direction of the interface when charging the battery. LED light is on when charging and off when it is fully charged.
   Charging time is approximately 2.5 hours, and working time is around 35 minutes.

3. After charging is complete, please install the battery into battery case and connect properly with the interface of remote control car when you need to use it. (Pay attention to the direction of the positive and negative poles of the interface.)

Notes:

1. This product is suitable for children over 6 years old. Juveniles should play it under the supervision of adults.
2. Please be cautious about using all electronic products and beware of electric shock.
3. Do not disassemble or refit this product, otherwise, it may cause abnormal issues of the product and even lead to accidents.
4. It is recommended to charge with suitable adapter. Avoid using fast chargers exceeding the rated power of the battery.

1.4 Battery Notes

• It is risky to use battery and may cause significant damage for people and property. All relevant responsibilities should be assumed on your own, please be cautious when using.
• Avoid leaking liquid contact with skin and eyes if the battery leaks.
• Please wash immediately with soap and water when it comes into contact with skin. Rinse with plenty of running water and seek immediate medical attention if contact with eyes.
• Remove power at once if the charger emits suspicious odor, sound or smoke.

Charging

• Charge with original charger and prohibit the use of damaged or other brands’ chargers.
• Do not charge expanded, leaking, or damaged battery.
• Do not overcharge and remove the charger when it is fully charged.
• Do not charge on conductive objects or close to flammable materials such as blanket, wooden floor, solid wood furniture, etc. Always
• keep in sight when charging.
• Do not charge immediately after using the product when the battery is still hot.
• Charge the battery at temperature between 0-40°C.

Adapter

• Please use a 5V/2A charger for charging. DO NOT use the fast chargers exceeding the rated power of the battery to avoid damage to the charging cable and battery.

Recycle

• This product contains electronic components and batteries. Please consult the local environmental protection management agencies and follow local law and regulations to disposal and recycle battery.

Remote Controller

2.1 Overview

1. Antenna
2. Power On/Off
3. Forward/Backward
4. Light
5. Deformation
6. Automatic Demonstration
7. Music
8. Sensing
9. Turn Left/Turn Right

2.2 Battery Installation
Open
Twist the button to “OPEN” to open the battery case cover.
Installation
After step 1, install properly 2 AA batteries in accordance with the polarity of batteries.(2 AA batteries not included)

Notes:

1. Pay attention to the direction of the positive and negative poles of batteries, and DO NOT reversely install.
2. Do not mix old and new batteries to use.
3. Do not mix different types of batteries to use.

2.3 Pairing
After battery installation of remote control car, switch on the car and then the remote controller. The red LED light flashes and then goes out, indicating that the pairing between car and remote controller is successfully matched.

Usage Recommendations

3.1 Environment Requirements

• Do not play the remote control car on public roads or pedestrian streets to avoid danger.
• Avoid playing it in crowds or near animals lest people and property should damage.
• Do not play it near rivers, ponds or lakes in case the car falls.

3.2 Operation Tips

• Please follow the below operation steps to avoid getting loss the remote control car:
  ①Turn on the remote controller
  ②Switch on the remote control car

• Do not touch or block the running wheels

• Avoid controlling the car in rains or making it run over puddle, so as to avoid breakdown.

• When the car deforms, there should be no obstructions around the car to ensure its normal operation. Moreover, the car structure is complex, please do not throw or fall while using, so as not to damage the car.

• During or after operation, the motor will generate heat. Please wait for the motor to cool down before touching.

• Please remove the batteries from remote control car and remote controller if not in use.

Remote Control Operation

1. Forward/Backward
   Left joystick is for controlling the car to go forward or backward.

2. Turn left/Turn right
   Right joystick is for controlling the car to turn left or right.

3. Music
   Press the “Music” button to control the car to turn music on or off.

4. Light
   Press the “Light” button to control the car to turn lights on or off.

5. Automatic Demonstration
   Press the “Automatic Demonstration” button to control the car to perform automatic demonstration of functions, and it will stop performing when you short press the button.

6. Deformation
   Long press the “Deformation” button, the car will change its form to car or robot.

7. Sensing
   Short press the “Sensing” button and the car will turn on the function of gesture sensing. When fingers close to the front of the car and then lift up, the car will deform to a robot. And again, put the fingers down toward the front of the car, it will deform back to a car. The deformation process is accompanied by music. Press the “Sensing” button to turn off the sensing mode.

Daily Maintenance

Please remove the batteries from the car if not in use.                 Remove thoroughly sand, mud or dust,etc. The external mental need to be applied anti- rust oil.(anti-rust oil not included) The car and batteries should be stored separately if not in use.

Common Problems And Solutions

If wheels do not work when you receive, please check whether it is not welded properly or the wire has come off.| If it is not welded properly or the wire has come off. please contact the after-sales staff to arrange withdrawal or return for repair.
If it breaks down after using for a while. please check whether rear wheels roll into hairs. causing the motor do not run or break down.| If it breaks down after rolling into hairs or something small debris, please remove them from rear wheels.
Stop running when using| Low battery| Replace a fully charged battery
The power indicator of remote controller is flashing| Low battery| Replace a fully charged battery
The remote controller car is moving slower than before| Low battery| Replace a fully charged battery
Stop moving after moving a certain distance| Beyond the effective remote control range| Control the car within effective remote control range(1181.1-1574.8inches)
The wheels get damaged| Wheels are damaged after a fall. or causing the remote control car malfunction| Replace the accessories of wheels
Can not control the car after pairing or it keeps rotating in place| The car battery is low or out of power.| Replace a fully charged battery and restart the car.
The USB cable is burned out| Check if it charges with fast chargers exceeding the rated power of the battery. causing the USB cable or battery to burn out| Change a new USB cable or battery. and charge with below 5V2A charger adapter
Deformation lag or can not
deform| Check whether the car has been crashed or dragged
before,causing the car shell damaged and can not deform.Check whether the upper of the car is stuck and causes deformation lag.| Follow the tutorial video to repair the remote control car and restart.(As shown in the video)
Can not deform| Check whether the remotecontrol car can not be
deformed due to infrared sensing| Turn off the infrared sensing and restart the remote control car.
The car automatically moves| Touch by mistake the button on the remote control before pairing| Turn off the car and restart
The car can not pair with the
remote controller| There is signal interference| Restart the car and remote controller
The car or remote controller is low battery| Replace the battery of the car or remote controller

Copyright ©2023 Veeniix All Rights Reserved.
veeniix.com
CONTACT US FOR MORE TECH SUPPORT
WhatsApp: +86 18928013876
Mon-Sun 6PM-4AM(PST)
[email protected]

References

• Veeniix Official Website

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>