Paul Neuhaus 834943 Power Of Wireless Charging LED Lamp User Manual

June 16, 2024
Paul Neuhaus

Paul Neuhaus Logo 834943 / 834944
Operation Manual

Specifications

Color temperature 3000K / 4200K / 5500K
CRI > 80 Ra
Power Supply 12V 1,5A
Lumen 440 Im
Power 8 W
Power of wireless charging 5 W

Paul Neuhaus 834943 Power Of Wireless Charging LED Lamp -
PowerThis product contains a light source of energy efficiency class

Attention

  • Do not self-dissamble the product. (Risk of electric shock)
  • Use the included power supply for the lamp to ensure normal operation,
  • Do not over-adjust the joint activity parts, to avoid any damage to the lamp.
  • Do not put the lamp on unstable desk to avoid the dropping out.
  • Do not put the lamp into high temperature or high-humidity environment.
  • Do not look at the LED light source. (Risk of eye damage)
  • Incases below conditions ccour, pull out the power cord and stop using the lamp.
  • If needed, call for support staff:
  • The power cord is broken.
  • The lamp smokes or sparks.
  • The lamp is abnormally flickering or the LED bulb is broken.

Functions

  • Wireless charger to charge smart watches and mobile phones (with QI wireless standards)
  • Calendar

User Manual

  •  Connect the adapter with the socket behind the lamp.

  (Notice) Use only the adapter included in the scope of delivery to operate the lamp. The adapter must not be used for other devices!

The range of activity for the lamp:

  • Lamp arm can be foldable to 90° angle.
  • Fix the lamp base while adjusting the arm.
  • The lamp head can be foldable to 150° angle. (it may be broke if is over-adjust)

Battery change

Turn the battery compartment cover to the left to open the battery compartment. After replacing the battery, turn the battery compartment cover to the right to lock it.

Adjusting the display brightness

Paul Neuhaus 834943 Power Of Wireless Charging LED Lamp -
Display

  • As soon as the power supply is connected, the display lights up in the highest brightness setting
  • Press the button( ) and select the desired brightness from 3 brightness levels.

Operation Guide

  • Touch switch operation: (see the drawing)Paul Neuhaus 834943 Power Of Wireless Charging LED Lamp - Dimup
  •  Calendar and alarm setting:Paul Neuhaus 834943 Power Of Wireless Charging LED Lamp - Setting
  • Date and Time setting:
  1. In normal mode, press “Set” button to achieve setting functions, press again to move to next sequence.
    Hour-Minute-Year-Month-Day

  2. Press “up” and “down” to setting. Week changes automatically when the date change.

  3. Press the “Mode” button to end or the setting mode will automatically end after 1 minute.

  4. In normal mode, press “up” button to switch between “12h” and “24h” display.

  • Snooze function setting:
  1. In normal mode, press the “Mode” button to achieve alarm setting.

  2. In alarm mode, press the “up” and “down” button to set the alarm sequence.
    Hour-Minute-Snooze duration-Alarm tone

  3. Press “up” and “down” to setting.

  4. In alarm mode, press “up” und “down” to turn on/off alarm and snooze function. Press again to achieve next function sequence:
    alarm on – snooze on – alarm off – snooze off

  5. When come to alarm time, it will ring one minute, then snooze and ring again. Press any key to alarm off.

  • Temperature setting:
    In normal mode, press the “down” button to switch between “F”  and “C”

Wireless charging

Place the mobile phone with the technical standard QI on the charging point for charging. As soon as the light indicator lights up red and the screen shows the connection, your device will be charged. If you device does not display the charging status, check wheter the device is correctly positioned on the charging point.

  • The light is in the charging state when the light indicator lights up.

The red light flashes and starts charging
The green light will light up when the mobile phone is fully charged.
The mobile phone battery symbol will also show a full charge state.
(Only the function of wireless charging of mobile devices have a state of charge indicator function. There is not this indicator, if the mobile phone is equipped with a receier when charging) The charging process is complete when the light indicator lights up green.

Paul Neuhaus GmbH
Olakenweg 36 . 59457 Werl
Germany
E-mail:kundenservice@neuhaus-group.de
Tel.: +49 (0) 2922 / 9721 – 9290

Documents / Resources

| Paul Neuhaus 834943 Power Of Wireless Charging LED Lamp [pdf] User Manual
834943 Power Of Wireless Charging LED Lamp, 834943, Power Of Wireless Charging LED Lamp, Wireless Charging LED Lamp, Charging LED Lamp, LED Lamp, Lamp
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals