JoFomp HM783A 16 Inch Large Digital Wall Clock User Manual

June 16, 2024
JoFomp

JoFomp HM783A 16 Inch Large Digital Wall Clock

JoFomp HM783A 16 Inch Large Digital Wall Clock

DIAGRAM

  1. Day of the week
  2. Hour
  3. Minute
  4. Stopwatch
  5. Countdown timer
  6. Alarm
  7. Remote controller receiver
  8. Temperature Humidity
  9. Data
  10. Remote
  11. Adapter
  12. USB cable
  13. Nails
  14. Installation Template
    Diagram

INSTALLATION OPTIONS

  • The clock can be hung on a wall or placed on a flat surface.
  • If you choose to hang it on a wall, you can use the provided installation hole template to position toenails.
  • Please ensure that the nails or screws are securely fixed in place.

INSTRUCTIONS

Remote

Instructions

  • Power On/Off the clock:
    Press the red power button to power on/off.

  • Clock Settings:

1. Press the to set the options as follows: 12124H, Hour, Minute, Year, Month, Day, and 00″F;  

a) Use the and to adjust;
b) Settings related to numbers can also be adjusted using the numeric keypad;

2. Press the to save and move to the next option;
3. Press the or 5 seconds of inactivity will auto save the settings and exit the setup mode.
  • Brightness Adjustment:
1. Press the brightness button to cycle through 10 brightness levels or choose the “Auto” option;
2. Press the to save or it will auto save after 5 seconds of inactivity.
  • Alarm Settings:
1. Press the to view the current alarm. Click the again to turn on/ off the alarm, the corresponding alarm icon will appear/disappear;
2. Press the and the in turn to set the options as follows: Hour, Minute,Weekday Mode; Use the and to adjust;  

Settings related to numbers can also be adjusted using the numeric keypad;

3. Press the  to save and move to the next option;
4. Press the  or 5 seconds of inactivity will auto save the settings and exit the setup mode.
  • Turn Off the Alarm:
1. When the alarm goes off, press any button to turn off the alarm temporarily,and the alarm will go off the next day;
2. Press the to view the current alarm, click the again to turn off the alarm permanently, and the alarm icon will disappear.
  • DST (Daylight Saving Time) Mode:
    Press the to enter or exit DST mode.

  • Stopwatch:

1. Press the to enter the stopwatch mode;
2. Press the to start the stopwatch;
3. Press the again to pause or resume the stopwatch;
4. Long Press the for 3 seconds to exit the stopwatch mode.

Set Key

  1. Press the “sET” to set the options as follows: 12124H, Hour, Minute, Year, Month, Day, and 00″F; Use the”+” and._,, to adjust;
  2. Press the “sET” to save and move to the next option;
  3. 5 seconds of inactivity will auto save the settings and exit the setup mode.
    Instructions

Alarm Key

  1. Press the to display the alarm settings;
  2. Use the “+” and “-“ to toggle the alarm on or off;
  3. Press the “sET” to set the alarm while in the alarm setting mode.
    Instructions

FCC STATEMENT

Operation is subject to the following two conditions:

  1. This device may not cause harmful interference, and
  2. This device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning tithe equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio /TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals