RINSEKIT 4 Gallon Cube Portable Shower User Guide

June 16, 2024
RINSEKIT

RINSEKIT 4 Gallon Cube Portable Shower User Guide

QUICK START GUIDE

JUST ADD WATER

Remove the water tank cap and add clean water to the tank.

PUSH POWER

Your RinseKit comes fully charged. Just push the power button.

SPRAY

Turn the on/off valve to the “ON” position and spray!
Hear Bead

CONTROL PANEL

power button Press power button to turn on system. Only power on when there is water in the tank. The ON/OFF vale must be in the “ON” position to spray.

LED display panel The LED display panel reads the temperature of the water within the unit. The outer ring shows battery life. For optimal use, charge the unit only when it has entered the red.

charge batteryTo charge battery, open water cover and plug in car or wall charger into the charging port. Keep the cover closed when not in use.

USB portUSB ports can be used for charging external devices. Keep cover closed when not in use.

WARNINGS & CARE INSTRUCTIONS

DO NOT USE SPRAY FUNCTION WHEN TANK IS EMPTY. The pump will not automatically turn off if the water tank is empty. Running the pump dry for more than a few minutes

TemperatureFREEZING CONDITIONS WILL DAMAGE YOUR RINSEKIT. For cold conditions or longterm storage, drain all of the water out of the tank, then keep nozzle on for 30 seconds to allow the pump to push all of the water out of the system

  • Periodically empty and air dry your unit
  • Do not freeze
  • Only fill with clean water between 33°F- 120°F
  • Spray vinegar through unit to clean the internal parts

WARNINGS & CARE INSTRUCTIONS

DO NOT USE SPRAY FUNCTION WHEN TANK IS EMPTY

The pump will not automatically turn off if the water tank is empty. Running the pump dry for more than a few minutes

FREEZING CONDITIONS WILL DAMAGE YOUR RINSEKIT

For cold conditions or longterm storage, drain all of the water out of the tank, then keep nozzle on for 30 seconds to allow the pump to push all of the water out of the system

ONLY FILL THE UNIT WITH CLEAN WATER

  • Only fill with clean water between 33°F- 120°F
  • To clean the internal parts, pour a small amount of vinegar into the tank and spray until empty.
  • Periodically drain your Rinse Kit and allow it to air dry

YOUR RINSEKIT COMES WITH A WARRANTY

For more information, please visit www.RinseKit.com and click on the Warranty Tab.
Note : Receipt/Proof of Purchase will be required to file a warranty claim.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals