Taiwei M10 TWS Earphones User Guide
- June 16, 2024
- Taiwei
Table of Contents
Taiwei M10 TWS Earphones
Product Information
Specifications
- Product Name: M10 TWS Earbuds
- Battery Type: 3.7V, >50mA Li Battery
- Charging Time: 1-2 hours
- Input Current (for charger case): 5V==1A
- Wireless version : VS.1
- Protocol: Supports HFP 1.7, HSP 1.2,AVRCP 1.6, SPP 1.2 and PBAP 1.0
- Speaker Diameter : 8mm
- Working distance: 1 Om-20m
- Call Time: 5-6H (1 time full charged)
- Play Music Time: 5-6H (1 time full charged)
- Standby time:650H (With charger case)
- Frequency:2402MHz~2480MHz
- Working Temperature: -10°-55°
Specification of charger case:
- Input current: SV== 1 A
- Output current: SV ==1 A
- Battery type: 3.7V
- Charging time:1-2H
How to operate the earbuds:
- Make sure that the charging case has electricity. If the charging compartment is out of power, please fully charge the charging compartment;(Pick up the two earbuds and put them back on the cover. The charging compartment indicator lights up to indicate that there is power. If it does not light, it means no power.)
- Take the two earbuds out of the charging case and wear them on the left and right ears respectively. The earphones will automatically turn on and automatically pair;(Voice prompt: power on, left channel, right channel, waiting for connection).
- Turn on the phone Bluetooth and click on the connection pair name ” 5.1 ” to connect (voice prompt “Connected”).
How to pairing
Warming remain
For the first time to use the earbuds or for a long time to no use, please charge the charging case and earphones before, Please keep it in an unobstructed and effective environment within 10 meters. Otherwise, it may be stuck and disconnected.
Indicator description:
-
Charge the earbuds: Put the earbuds into the charging case and cover it to charge.
earbuds indicator: Lights up red when charging, and red light when fully charged. The charging case flashes green and the light is off after charging. -
Charge the charging case: Plug the 5V/1A USB into the charging port to charge. During charging, the middle digit of the charging stand display indicates the charging case power. When the number is displayed as “100” , the battery is fully charged.
Charging case indicator light: The charging flashes green light, and the light is off after charging. -
Charge to the mobile phone; 3 Charge the mobile phone:
Connect USB Cable to USB port of case to charge the mobile phone. Charging Case indicator light : Light will turn green when charging and turn off when fully charged In master-slave synchronous binaural mode, double-click on one of the headphones is the previous song, and double-click the other headset is the next song!
NEXT Songs
PREV Songs
The functions of volume + / – are as follows: quickly triple tap “a” for
volume+, and triple click “B” for volume-
Volume+
Volume-
Single Earbud Mode
Reminder: For the first use, please put the 2 earphones in the charging bay
and activate for a few seconds, so that the earphones will automatically turn
on when you pick them up, and the automatic binaural teaming will be
successful. Then turn on the Bluetooth function of the mobile phone to search
for signals. After finding the signal, click to connect. After the connection
is successful, if you want to use it with one ear, you can put one of them in
the charging bay without switching the signal connection. The earphone is not
divided into the main and auxiliary ears, and the two ears are seamlessly
docked, which is very easy to use.
Headset signal name
“L” Headset signal name: 5.1
“R” Headset signal name: 5.1
Notice: If you find that 2 earphones cannot listen to music at the same
time, please check if there are 2 identical signals in the Bluetooth
management of the mobile phone. If so, please delete the 2 signals and turn
off the Bluetooth function of the mobile phone, and then put the earphones in
the charging compartment. Pick it up, the headset will automatically turn on
and automatically team up, wait until one of the lights is off, search for the
signal after turning on the Bluetooth function of the mobile phone, if it is a
signal, just connect it directly!
Special Note: The two earbuds are well paired before packaged, but if
they can not paired well due to some wrong operations, pis. do as following
steps to re-pair the earbuds. Power off the two earbuds, then press the button
of the two earbuds at same time and do not release for about 1 Os, blue lights
sparkled —-> red and blue lights sparkled alternatively —> release —>two
earbuds are in the situation of paired, and they are ready for phone
searching.
Note: This operation also clears the team record between the phone and
the earbuds, so you need to delete the Bluetooth pairing record before the
phone and then search for the connection again.
Product Usage Instructions
Charging the Earbuds
To charge the earbuds, follow these steps:
- Make sure that the charging case has electricity. If the charging compartment is out of power, please fully charge it.
- Put the earbuds into the charging case.
Pairing the Earbuds
To pair the earbuds with your device, follow these steps:
- Enter into the Settings menu on your device.
- Select “Bluetooth” from the settings menu.
- Turn on Bluetooth in your device settings.
- Select “5.1 Dume” from the list of available devices in your device’s Bluetooth settings to connect.
Using the Earbuds
Once the earbuds are paired with your device, you can use them for
various functions:
- To play the next song, double-click on one of the earbuds.
- To play the previous song, double-click on the other earbud.
- To increase the volume, triple tap one of the earbuds.
- To decrease the volume, triple click the other earbud.
Indicator Description
The following indicators are used:
- CD: Charge the earbuds by putting them into the charging case.
- Next Songs: Double-click on one of the earbuds to play the next song.
- Prev Songs: Double-click on the other earbud to play the previous song.
- Volume+: Triple tap one of the earbuds to increase the volume.
- Volume-: Triple click the other earbud to decrease the volume.
Special Note
If the earbuds are not properly paired, you can follow these steps to
re-pair them:
- Power off both earbuds.
- Press and hold the buttons on both earbuds simultaneously for about 10 seconds.
- The lights on the earbuds will flash alternately between red and blue.
- Release the buttons.
- The earbuds are now in the paired state and ready for phone searching.
Note: This operation will also clear the pairing record between the phone and the earbuds, so you need to delete the Bluetooth pairing record on your phone and then search for the connection again.
Safety Guidance
Please adhere to the following safety guidelines:
Use the standard 5V charger (4.9-5.5V) to charge the earbuds.
- please use the standard SV charger (4.9-5.SV)
- Do not place the charging case and the Bluetooth earbuds next to the flammable explosives.
- Do not disassemble the charging case and Bluetooth earbuds, or insert other items into the product to avoid damage to the product or even cause harm to you.
Care and Maintenance **
**
To ensure the longevity of your Bluetooth earbuds, please follow these care and maintenance tips:
- Avoid any mis-operation caused by collision put the earbud in charging case before put in your pocket
- Charge the earbuds fully if not in use for a long time, and charge them at least once a week.
- Do not use a abrasive cleaner to clean the Bluetooth earbuds.
- Do not expose the Bluetooth earbuds to excessive temperature.
- Do not expose the earbud under the blazing sun for a long time
- Do not let the Bluetooth earbuds be close to the fire source.
- Do not drop, bump, scratch, twist, tap, crush, or put into the water.
- Keep away from magnets, appliances and speakers when using Bluetooth earbuds.
- Do not place the Bluetooth earbuds in extreme temperature (use ambient operating temperature range -10°C-SS°C)
- Do not expose the Bluetooth earbuds to moisture.
- If you do not use the Bluetooth earbuds for a long time, please charge it fully and charge it once a week to extend the life of the Bluetooth earbuds.
Serious warning:
Do not use this product while charging. Please use the adapter specified by
the manufacturer to charge the product. Do not disassemble the built-in
lithium battery. Do not let the metal contact or short the electrode. Do not
touch or squeeze the battery to avoid Place in a humid or hot (>60 ° C)
environment. Warranty Card Warranty certificate, please fill in and keep it
safely.
Warranty Card
Warranty certificate, please fill in and keep it safely
Packing Details
| Item Name | Quantity |
|---|---|
| Bluetooth Earbuds | 2 pcs |
| Charger Case | 1 pc |
| User Manual | 1 pc |
| Ear tips | 2 pcs |
| Use Charger Line | 1 pc |
FCC Compliance **
**
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Frequently Asked Questions (FAQ)
-
Q: How long does it take to charge the earbuds?
A: The earbuds take approximately 1-2 hours to fully charge. -
Q: How do I pair the earbuds with my device?
A: To pair the earbuds, follow the instructions provided in the “Product Usage Instructions” section above. -
Q: How do I increase or decrease the volume?
A: To increase the volume, triple tap one of the earbuds. To decrease the volume, triple click the other earbud. -
Q: What should I do if the earbuds are not paired properly?
A: If the earbuds are not paired properly, follow the steps provided in the “Special Note” section above to re-pair them.