TTB05 2023.3.30 Tennis Table Instruction Manual

TTB05 2023.3.30 Tennis Table

Product Specifications

• 2 Piece Table Tennis Table
• 12mm Table Top
• 30mm apron for added support
• Dia 32 mm steel legs for stability
• Dia 50 mm swivel and lockable wheel
• Net and Post Included

WARNING

• DO NOT ASSEMBLE OR USE THIS TABLE WITHOUT READING THIS MANUAL.
• THIS TABLE IS FOR HOME RECREATIONAL USE ONLY, NOT FOR COMMERCIAL USE.
• NOT SUITABLE FOR CHILDREN UNDER 6 YEARS OF AGE. ADULT SUPERVISION IS REQUIRED WHEN CHILDREN ARE PLAYING.

SAFETY INSTRUCTIONS

WARNING: For your safety, please read this manual and the safety instructions carefully before using this equipment.

• This product is for exclusive home use, not suitable for use in professional or health establishments of any kind.
• Must be kept indoors.
• Do not sit or stand on the product.
• Do not drag the table when moving it to avoid damaging the legs.
• This is not a toy for children. Adult supervision is recommended when children are using the table.

SAFETY DIRECTIVE DEFINITIONS
The following definitions describe the severity level of each signal word. Please pay attention to these symbols while reading the manual.

• DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
• WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
• CAUTION: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in Bproperty damage.

ASSEMBLY AREA SAFETY

• Place on a flat and stable surface, with 2 meters of free space around it.
• Keep the assembly area clean and orderly. Cluttered and dimly lit areas are conducive to accidents.
• Do not place this equipment on a surface that may block the ventilation openings.

NOTICE : To protect the floor or carpet from possible damage, place a mat under the computer . Note: Some images and drawings may differ from the actual product.

USE AND MAINTENANCE

• Do not force the equipment to do more than it was designed to do.

•  Children should be supervised when using this product.

• Check the alignment or union of moving parts, the absence of parts and any other situation that could
  affect the operation of your equipment.

• If it is damaged, have it repaired before use. Lack of maintenance can lead to accidents.

• Use all parts of this equipment in accordance with these instructions and as directed.

• The equipment is for domestic use only. Do not use it for commercial purposes.

• Use only furniture polish spray to clean the outside of the table. Never use abrasives or solvents.

• Take care when using and moving the equipment to avoid injury

WARNING: Improper use of this product can cause accidents and personal injury.
NOTICE: Always store this equipment indoors, away from moisture and dust.

SERVICE

Service interventions on your equipment must be carried out by qualified persons using only original spare parts. This way, your safety will be maintained.
Keep this user manual in a safety place for future reference.

Parts List

ASSEMBLY INSTRUCTIONS

WARNING: Be careful not to leave plastic wrappers within the reach of children. It also contains balls and small parts. Not suitable for children under 3 years old. There is a danger of suffocation.

IMPORTANT: Please review the parts list and make sure you have all the parts before beginning assembly. At least two people are required to assemble this product.

Note: Some images may differ from the actual proud.

PREPARATION

Get into a clean, level location to begin assembly. The ping pong table will be assembled upside down and then turned over. It is a heavy product, so it will be necessary to have at least two strong adults to turn it.

TOOLS Needed:

• Phillips screwdriver (not included)
• Flat screwdriver (not included)
• Nut wrench (included)
• Allen key {included)
• Recommended:
• Electric screwdriver

CAUTION: If you use an electric screwdriver, please use low torque. The screws may be too tight if the torque is too high.

DESCRIPTION

1. Inner legs
2.  Wheels
3.  Outer legs
4.  Game surface
5.  Net clamp
6.  Net

ASSEMBLY INSTRUCTIONS

STEP 1

• Place an outer curved leg with cap (A2) on one side of the player area and an inner curved leg with cap [A3} on the other end (corresponding to the center] of that half of the table.
• Attach the leg bracket (A9] to the outer curved leg (A3] and the inner curved leg (6] and fasten with bolts (HS). See Fig. A
• Repeat the procedure on the other half of the table.

STEP2

• Attach one end of the connecting tube (A21) to the inner side of the outer curved leg (A2) and tighten with a bolt (H4], two washers (H7], a spacer (A16] and a nut (HB). (See Fig.A].
• Attach the other end of the connecting tube IA21 I to the internal side of the inner curved leg (A3) and tighten with a bolt (H3], two washers (H7), a spacer (A16) and a nut (HB ). (See. Fig.BJ
• Repeat the procedure on the other connecting tube (Ml.

STEP 3

Make sure caps are placed on the ends of the curved legs. Then insert the wheels [A13) into the inner 0 curved legs [A3) as shown

STEP4
Attach the frame [A5) to the inner curved leg [A3) and tighten with two bolts [H2) and two washers [H7). [See Fig. A)

WARNING!

PRECAUCION : Dos adultos fuertes deben dar vuelta la mesa como se muestra en la figure

• A. Turn the table on its side.
• B. Fold the legs and each half of the table and lock them.
• C. Raise the table and flip it over in the air.
• D. Do not tilt the table on its legs!
• E. Set the table on the ground evenly on all wheels, to prevent breaking the legs.

STEP5

• Repeat steps 1, 2 and 3 with the other half of the table.
• Repeat step 4, attach the grame (A5] to the Inner curved leg (A3) and tighten with two bolts (H2] and two washers (H7). [See Fig. Al

STEP6

Attach the logo panel (A6) to the frame (A5) and tighten with two bolts (H1), four washers (H7] and two nuts (HS]. (See Fig. A].

STEP7

• Attach the safety lock [A10) to the inner curved leg (A3] and tighten it with a bolt (H6), a washer (H7), and a nut (HB). (See FIG.Al
• Repeat the procedure on the other side.

STEPS
Place the net clamps (A19) in the middle of the table and slide one net ending over one of the clamps. Stretch the net [A18) across the center of the table and slide the other ending onto the other clamp. (See Fig. A).

TABLE FOLDING

• Lock the wheels.
• Fold the table: Fold up the side of the lable that doesn’t contain the net clamps. Make sure that the safety lock IA 10) is on. Repeat the procedure on the other side. Hook the safety straps IA 11 l to prevent the sides from falling. [See FIG. 9)
• Unfold the table: First, release the safety lock (A 10) and the safety straps (A 11 ). The pull the lower part of lhe outer lags and lower the table slowly.

Note : When the table is in its storage position, always attach the safety strap to prevent the sides from falling.

THIS PRODUCT IS FOR HOME USE ONLY, NOT SUITABLE FOR PROFESSIONAL OR HEALTH ESTABLISH- MENTS OF ANY KIND.
No claims are accepted for products that have the following:

• Blows
• Falls
• Misuse
• Incorrect or improper installation or assembly; excessive use, commercial and / or professional use of the product.
• Damage caused by oxidation, sulphation, moisture, exposure to rain and / or water or sources of excessiveheat, use of abrasives, corrosion
• Damage caused by the adaptation of parts and / or accessories that do not belong to the product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>